2
Yes
None
1
1000000
Name...
/products-2/
Thumbnail
Filter
Sort By:

Categories:

Manufacturer

Cartridges
Charisma Audio Model 103
$750.
Charisma Audio Model 103 Image
  • Cartridge Weight: 8.8 g
  • Cartridge Body: birdseye maple wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with OFC copper
  • Output Voltage: 0.32 mV at 3.54 cm/sec.
  • Internal Impedance: 40 ohms
  • Frequency Response: 20 – 45,000 Hz ± 1 dB
  • Channel Balance: better than 1 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 7 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.1 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 30 hours
Grado The Statement V2
$3,500.
Grado The Statement V2 Image
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 8-70 KHZ
  • CHANNEL SEPARATION: AVERAGE 45 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado The Reference V2
$1,500.
Grado The Reference V2 Image
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ
  • CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado Master V2
$1,000.
Grado Master V2 Image
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ
  • CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado Sonata V2
$600.
Grado Sonata V2 Image
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ
  • CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado Platinum V2
$350.
Grado Platinum V2 Image
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ
  • CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Dynavector XV-1t​
$9,450.
Dynavector XV-1t​ Image
  • Type: Low output moving coil cartridge with multi Alnico magnets and the Flux damper
  • Output Voltage: 0.35mV (at 1KHz, 5cm/sec.)
  • Channel Separation: 30 dB (at 1KHz)
  • Channel balance: 1.0 dB (at 1KHz)
  • Frequency response: 20 – 20,000Hz (± 1dB)
  • Compliance: 10 x 10-6 cm/dyn
  • Tracking force: 1.8 – 2.2 grams
  • Impedance: R=24 ohms
  • Recommended load resistance: > 75 ohms
  • Cantilever: 6mm length 0.3 mm dia. solid boron with a special armaturer
  • Stylus tip: PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight: 12.0 grams
Dynavector XV-1S
$5,650.
Dynavector XV-1S Image
  • Type Low output moving coil cartridge with Multi alnico magnets and Flux damper
  • Output Voltage 0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation 30 dB (at 1KHz)
  • Channel balance 1.0 dB (at 1KHz)
  • Frequency response 20 – 20,000Hz (± 1dB)
  • Compliance 10 x 10-6 cm/dyn
  • Tracking force 1.8 – 2.2 grams
  • Impedance R=6 ohms, L=18 micro Henry
  • Recommended load resistance > 30 ohms Stylus 0.14 x 0.08 mm Line contact PF
  • Weight 12.6 grams
Dynavector Te Kaitora Rua
$3,450.
Dynavector Te Kaitora Rua Image
  • Type low output moving coil cartridge with flux damper and alnico magnet
  • Output Voltage  0.26mV (at 1KHz, 5cm/sec.)
  • Channel Separation  30 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 1dB)
  • Compliance  10 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2 grams
  • DC resistance  R=5 ohms
  • Recommended load
  • impedance  >30 ohms
  • Cantilever  6mm length solid boron
  • Stylus  PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight  9.8 grams
Dynavector XX2 Mk2
$1,995.
Dynavector XX2 Mk2 Image
  • Type Low output moving coil cartridge with Alnico magnet and Flux damper
  • Output Voltage 0.28mV (at 1KHz, 5cm/sec.)
  • Channel Separation 30 dB (at 1KHz)
  • Channel balance 1.0 dB (at 1KHz)
  • Frequency response 20 – 20,000Hz (± 1dB)
  • Compliance 10 x 10-6 cm/dyn
  • Tracking force 1.8 – 2.2 grams
  • Impedance R=6 ohms
  • Recommended load resistance > 30 ohms
  • Cantilever 6mm length 0.3 mm dia. solid boron
  • Stylus PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight 8.9 grams
Dynavector 17D3
$1,350.
Dynavector 17D3 Image
  • Type  Low output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage  0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation  25 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 1dB), 20 – 100,000Hz
  • Compliance  15 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2grams
  • DC resistance  R=32 ohms
  • Recommended load
  • resistance  > 100 ohms
  • Cantilever  1.7mm length, 0.25dia solid diamond
  • Stylus  Micro-Ridge
  • Weight  5.8 grams
Dynavector DV-20x2 L or H
$995.
Dynavector DV-20x2 L or H Image
  • Cartridge Weight: 7.1 g
  • Cartridge Body: amboyna burl wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with ultra high purity single crystal copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ
  • CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS

XV-1t​     $9,450

Reference One​      $2,200

     The Statement V2        $3,500

  • Cartridge Weight: 12 g
  • Cantilever: sapphire
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with single crystal high purity copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
  • Cartridge Weight: 8.8 g
  • Cartridge Body: birdseye maple wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with OFC copper
  • Output Voltage: 0.32 mV at 3.54 cm/sec.
  • Internal Impedance: 40 ohms
  • Frequency Response: 20 – 45,000 Hz ± 1 dB
  • Channel Balance: better than 1 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 7 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.1 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 30 hours

Platinum V2     $350       Sonata V2​    $600​

  • Type  High/Low output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage  2.8mV / 0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation  25 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 2dB)
  • Compliance  12 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2grams
  • DC resistance  150 ohms / 5 ohms
  • Recommended load
  • resistance  > 1,000 ohms / > 30 ohms
  • Cantilever  6mm length, hard aluminium pipe
  • Stylus  Micro Ridge Nude diamond
  • Weight  9.2 gram
Dynavector 10x5​
$650.
Dynavector 10x5​ Image
  • Type  High output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage  2.5mV (at 1KHz, 5cm/sec.)
  • Channel Separation  25 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 2dB)
  • Compliance  12 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2 grams
  • DC resistance  R=150 ohms
  • Recommended load
  • impedance  >1K ohms
  • Cantilever  6mm length aluminium pipe
  • Stylus  Elliptical
  • Weight  7.3 grams
Charisma Audio Reference One Two
$2,800.
Charisma Audio Reference One Two Image
  • Output Voltage: 0.38 mV at 3.54 cm/sec
  • Coil: Special iron crossed-coil with extremely high purity and ultra fine single crystal copper
  • Cantilever: Ruby
  • Stylus: Super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Internal Impedance: 12 ohms
  • Recommended Loading: 100 – 1,000 ohms
  • Dynamic Compliance: 15 um/mN
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Cartridge Body: Bocote Wood
  • Cartridge Weight: 7.1 g
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Charisma Audio Reference One
$2,200.
Charisma Audio Reference One Image
  • Cartridge Weight: 7.1 g
  • Cartridge Body: amboyna burl wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with ultra high purity single crystal copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Charisma Audio MC-2
$1,650.
Charisma Audio MC-2 Image
  • Cartridge Weight: 12 g
  • Cantilever: sapphire
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with single crystal high purity copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Charisma Audio MC-1
$1,250.
Charisma Audio MC-1 Image
  • Cartridge Weight: 12 g
  • Cantilever: titanium alloy
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with 6N OCC copper
  • Output Voltage: 0.4 mV at 3.54 cm/sec.
  • Internal Impedance: 13 ohms
  • Frequency Response: 20 – 20,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Dynavector XV-1S Mono​
$5,950.
Cartridges
Charisma Audio Model 103 Image
Charisma Audio Model 103
Cartridge Weight: 8.8 g Cartridge Body: birdseye maple wood Cantilever: ruby Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil... Read More
$750.
Grado The Statement V2 Image
Grado The Statement V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 8-70 KHZ CHANNEL SEPARATION: AVERAGE 45 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENSI... Read More
$3,500.
Grado The Reference V2 Image
Grado The Reference V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$1,500.
Grado Master V2 Image
Grado Master V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$1,000.
Grado Sonata V2 Image
Grado Sonata V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$600.
Grado Platinum V2 Image
Grado Platinum V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$350.
Dynavector XV-1t​ Image
Dynavector XV-1t​
Type: Low output moving coil cartridge with multi Alnico magnets and the Flux damper Output Voltage: 0.35mV (at 1KHz, 5cm/sec.) Channel Separation: 30 dB (at 1KHz) Channel balance: 1.0 dB (at 1KHz) ... Read More
$9,450.
Dynavector XV-1S Image
Dynavector XV-1S
Type Low output moving coil cartridge with Multi alnico magnets and Flux damper Output Voltage 0.3mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Freque... Read More
$5,650.
Dynavector Te Kaitora Rua Image
Dynavector Te Kaitora Rua
Type low output moving coil cartridge with flux damper and alnico magnet Output Voltage  0.26mV (at 1KHz, 5cm/sec.) Channel Separation  30 dB (at 1KHz) Channel balance  1.0 dB (at 1KHz) Freque... Read More
$3,450.
Dynavector XX2 Mk2 Image
Dynavector XX2 Mk2
Type Low output moving coil cartridge with Alnico magnet and Flux damper Output Voltage 0.28mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency re... Read More
$1,995.
Dynavector 17D3 Image
Dynavector 17D3
Type  Low output moving coil cartridge with flux damper and softened magnetism Output Voltage  0.3mV (at 1KHz, 5cm/sec.) Channel Separation  25 dB (at 1KHz) Channel balance  1.0 dB (at 1KHz) ... Read More
$1,350.
Dynavector DV-20x2 L or H Image
Dynavector DV-20x2 L or H
Cartridge Weight: 7.1 g Cartridge Body: amboyna burl wood Cantilever: ruby Stylu... Read More
$995.
Dynavector 10x5​ Image
Dynavector 10x5​
Type  High output moving coil cartridge with flux damper and softened magnetism Output Voltage  2.5mV (at 1KHz, 5cm/sec.) Channel Separation  25 dB (at 1KHz) Channel balance  1.0 dB (at 1KHz) ... Read More
$650.
Charisma Audio Reference One Two Image
Charisma Audio Reference One Two
Output Voltage: 0.38 mV at 3.54 cm/sec Coil: Special iron crossed-coil with extremely high purity and ultra fine single crystal copper Cantilever: Ruby Stylus: Super fine line contact nude diamond ... Read More
$2,800.
Charisma Audio Reference One Image
Charisma Audio Reference One
Cartridge Weight: 7.1 g Cartridge Body: amboyna burl wood Cantilever: ruby Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil w... Read More
$2,200.
Charisma Audio MC-2 Image
Charisma Audio MC-2
Cartridge Weight: 12 g Cantilever: sapphire Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil with single crystal high purity copper... Read More
$1,650.
Charisma Audio MC-1 Image
Charisma Audio MC-1
Cartridge Weight: 12 g Cantilever: titanium alloy Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil with 6N OCC copper Output ... Read More
$1,250.