Well Tempered Lab Amadeus GTA Turntable
$4,850.
• Symmetrex tone arm configuration
• “Zero Tolerance” platter bearing
• Servo controlled motor with vibration controlled mounting
• 0.004” polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer lacquered MDF sandwich construction plinth
• Isolation feet included
- music hall’s unique dual plinth construction
- one-piece full carbon fiber tonearm
- counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
- completely isolated/decoupled DC motor with 33⅓ and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
- motor sits on its own resonance damping puck
- Optional Ortofon 2M Bronze cartridge with a nude fine line stylus
- ($440 value)
- the supplied cartridge is properly aligned and mounted
- precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
- non-resonant acrylic platter with metal screw-on record clamp
- and soft felt mat
- high quality gold RCA connectors and detachable phono cable
- adjustable tip toe feet with anti scratch cups
- low noise fully manual belt drive design
- built-in round spirit level for proper leveling
- dust cover and 45rpm adaptor included
- excellent instruction manual and easy assembly
USB-1 $249.95
Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega’s Roy Gandy, two years to develop the all new ‘Planar 3’ following the biggest re-design of the iconic ‘Three’ model ever seen.
Our team have worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new ‘Planar 3’ is truly a new turntable for 2016 carrying over just two components from the previous model.
RP-6 Exact $1,990.00
RP-6 w/o Cartridge $1,495.00
Based on the ever popular Gyro SE, the Orbe SE is Michell’s flagship turntable. It improves upon the Gyro in a number of areas. It employs a similar European-made DC motor housed in a significantly heavier bronze and aluminum housing, with the addition of a tachometer feedback signal that is sent to the NC Tacho power supply. Using this signal, this larger power supply constantly adjusts the motor speed in real time for rock solid speed stability under varying environmental or loading conditions such as caused by stylus drag for instance. Additionally the NC Tacho power supply uses patented Never Connected circuitry which totally breaks the conduction path from AC mains pollution, preventing unwanted contamination of the DC voltage that is fed to the motor. The sound improvement is stunning. Like the Gyro SE, the massive acrylic platter has most of its weight distributed at its periphery and uses a screw down clamp for more precise clamping of the LP. The cast aluminum chassis is damped with Michell’s DensoDamp compound to reduce ringing. Finally, the Orbe SE rests on a second spider that is de-coupled from the first via three single point contacts.
Ace-Spacedeck $2,895.00
Ace-Spacedeck w/ 10″ Ace-Space Arm $4,490.00
- music hall’s unique dual-plinth construction
- gorgeous high-gloss piano black lacquer finish
- top tier 9” carbon fiber tonearm
- counterweight’s center of gravity is level with the stylus tip,
- is decoupled from the arm, and acts as a resonance damper
- DC synchronous motor for superior speed stability,
- separately isolated on the lower platform
- two-speed stepped motor pulley for 33⅓ and 45 rpm
- Ortofon 2M Blue cartridge with replaceable nude
- elliptical diamond stylus ($236 value)
- the cartridge supplied is properly aligned and mounted
- precision stainless steel main bearing sheathed in Teflon®
- for noise-free fluid operation
- dynamically balanced alloy platter with soft felt mat
- screw-on record clamp
- high quality gold RCA connectors and detachable phono cable
- special vibration damping adjustable feet
- built-in round spirit level for proper leveling
- low noise fully manual belt-drive design
- excellent instruction manual and easy assembly
- dust cover and 45 rpm adaptor included
The Rock 7 is an open frame, two speed, belt drive turntable mounted on three Seismic Load Cells™. It is the latest evolution of Townshend Audio’s legendary Rock turntables, so named because of the solidity of the bass they can deliver. This is a result of the unique front end damping trough which greatly diminishes vibration in the arm and cartridge and results in the cleanest sound available with vinyl.
MMF-5.3 $995.00
Delphi Mk VI w/ Regular Power Supply $8,300.00
w/ Regular Power Supply and Dustcover $8,850.00
w/ Turbo Mk 2 Power Supply $9,150.00
w/ Turbo Mk2 Power Supply and Dustcover $9,700.00
HyperSpace $4,495.00
HyperSpace 10″ Ace-Space Arm $6,590.00
Dais Turntable w/ Wave Mechanic Power Supply $8,695.00
MMF-11.1 $4,495.00
• Aluminium base
• “Zero Tolerance” platter bearing
• Servo controlled motor, with vibration controlled mounting
• 0.004mm Polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping.
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer aluminium sandwich construction plinth
Well Tempered Lab Amadeus GTA Turntable
$4,850.
• Symmetrex tone arm configuration
• “Zero Tolerance” platter bearing
• Servo controlled motor with vibration controlled mounting
• 0.004” polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer lacquered MDF sandwich construction plinth
• Isolation feet included
- music hall’s unique dual plinth construction
- one-piece full carbon fiber tonearm
- counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
- completely isolated/decoupled DC motor with 33⅓ and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
- motor sits on its own resonance damping puck
- Optional Ortofon 2M Bronze cartridge with a nude fine line stylus
- ($440 value)
- the supplied cartridge is properly aligned and mounted
- precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
- non-resonant acrylic platter with metal screw-on record clamp
- and soft felt mat
- high quality gold RCA connectors and detachable phono cable
- adjustable tip toe feet with anti scratch cups
- low noise fully manual belt drive design
- built-in round spirit level for proper leveling
- dust cover and 45rpm adaptor included
- excellent instruction manual and easy assembly
USB-1 $249.95
Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega’s Roy Gandy, two years to develop the all new ‘Planar 3’ following the biggest re-design of the iconic ‘Three’ model ever seen.
Our team have worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new ‘Planar 3’ is truly a new turntable for 2016 carrying over just two components from the previous model.
RP-6 Exact $1,990.00
RP-6 w/o Cartridge $1,495.00
Based on the ever popular Gyro SE, the Orbe SE is Michell’s flagship turntable. It improves upon the Gyro in a number of areas. It employs a similar European-made DC motor housed in a significantly heavier bronze and aluminum housing, with the addition of a tachometer feedback signal that is sent to the NC Tacho power supply. Using this signal, this larger power supply constantly adjusts the motor speed in real time for rock solid speed stability under varying environmental or loading conditions such as caused by stylus drag for instance. Additionally the NC Tacho power supply uses patented Never Connected circuitry which totally breaks the conduction path from AC mains pollution, preventing unwanted contamination of the DC voltage that is fed to the motor. The sound improvement is stunning. Like the Gyro SE, the massive acrylic platter has most of its weight distributed at its periphery and uses a screw down clamp for more precise clamping of the LP. The cast aluminum chassis is damped with Michell’s DensoDamp compound to reduce ringing. Finally, the Orbe SE rests on a second spider that is de-coupled from the first via three single point contacts.
Ace-Spacedeck $2,895.00
Ace-Spacedeck w/ 10″ Ace-Space Arm $4,490.00
- music hall’s unique dual-plinth construction
- gorgeous high-gloss piano black lacquer finish
- top tier 9” carbon fiber tonearm
- counterweight’s center of gravity is level with the stylus tip,
- is decoupled from the arm, and acts as a resonance damper
- DC synchronous motor for superior speed stability,
- separately isolated on the lower platform
- two-speed stepped motor pulley for 33⅓ and 45 rpm
- Ortofon 2M Blue cartridge with replaceable nude
- elliptical diamond stylus ($236 value)
- the cartridge supplied is properly aligned and mounted
- precision stainless steel main bearing sheathed in Teflon®
- for noise-free fluid operation
- dynamically balanced alloy platter with soft felt mat
- screw-on record clamp
- high quality gold RCA connectors and detachable phono cable
- special vibration damping adjustable feet
- built-in round spirit level for proper leveling
- low noise fully manual belt-drive design
- excellent instruction manual and easy assembly
- dust cover and 45 rpm adaptor included
The Rock 7 is an open frame, two speed, belt drive turntable mounted on three Seismic Load Cells™. It is the latest evolution of Townshend Audio’s legendary Rock turntables, so named because of the solidity of the bass they can deliver. This is a result of the unique front end damping trough which greatly diminishes vibration in the arm and cartridge and results in the cleanest sound available with vinyl.
MMF-5.3 $995.00
Delphi Mk VI w/ Regular Power Supply $8,300.00
w/ Regular Power Supply and Dustcover $8,850.00
w/ Turbo Mk 2 Power Supply $9,150.00
w/ Turbo Mk2 Power Supply and Dustcover $9,700.00
HyperSpace $4,495.00
HyperSpace 10″ Ace-Space Arm $6,590.00
Dais Turntable w/ Wave Mechanic Power Supply $8,695.00
MMF-11.1 $4,495.00
• Aluminium base
• “Zero Tolerance” platter bearing
• Servo controlled motor, with vibration controlled mounting
• 0.004mm Polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping.
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer aluminium sandwich construction plinth