Designed for the portable electronics market, our goal was to create a street-style headphone that will sonically outperform anything available in the affordable portable market. The eGrado is functionally stylish, lightweight and comfortable. By incorporating the same drivers used in our highly regarded SR60 headphones, we can proudly state that we are indeed the high end choice in the portable market. The eGrado features a behind the neck headband that is comfortable and stylish. We have indeed kept the highly praised Grado sound at a price point that is within reach of all.

The new TT-PSU, housed in our new style case, has a new anti-vibration circuit, output circuit protection and improved power supply regulation. Offering the convenience of electronic speed change, reduced motor noise and increased stability for all Rega 24v motor turntables.

The TT-PSU is an ideal upgrade path for the RP3 or the RP1 (RP1 when fitted with the 24v motor upgrade kit).

The King of Clean Vinyl

• Fully automatic European-designed Record Cleaning Machine
• Cool running turntable allows for hours of use
• Quiet motor leaves sanity intact
• Forward and reverse motor for deep cleaning
• Vacuum tubes for 7″ and 10″ records available
• Comes with proprietary record cleaning fluid and goat-hair brush

This FM Antenna receives distant FM stations from all directions!

A more powerful FM Antenna than any single element dipole antenna, the ST-2 vertical antenna is probably one of the best things ever to happen to FM listeners in urban and fringe reception areas alike.

Concentrating its reception “focus” only on the horizontal plane, the ST-2 FM Antenna is capable of getting more signal to your FM tuner with less “flutter” and “fading.”

The ST-2 FM Antenna is also less susceptible to “multipath interference,” due to its unique vertical polarization.

(SPT) is a purified water-based, non-alcohol stylus cleaner that helps keep cartridge styli scrupulously clean.

In addition to highly purified water, SPT contains only very small amounts of organic chemical cleaning agents. SPT has proven to be completely safe to use with all phono cartridges (not only LYRA’s).

Whatever the cartridge, excessive amounts of liquid should never be applied to the stylus and cantilever.

A key component of SPT is the accompanying brush which has been designed with super-soft bristles. Thanks to the bristles it is OK to drag the brush across the diamond stylus of the cartridge. Most other stylus brushes on the market have harder bristles that are not gentle with the diamond stylus, and could potentially cause damage. Even the LYRA brush must not be allowed to come into contact with any other part of the cartridge.

John Michell, one of audio’s best known and most respected audio engineers, designed this versatile, precision-engineered, geometrically correct counterweight system, suitable for all Rega arms and their various derivatives. This all stainless steel device will fit the Rega RB100/101/202/250/300/301/303/600/700/900/1000 arms and their variants such as Moth, Audio Note, Goldring, and Origin Live OL-1 arms. (Will NOT fit any other OL arms). The TecnoWeight will handle a wide range of cartridges, with weights from 3g to 13g. This versatility is achieved by supplying two different counterweights for cartridges in the 3-6g and 6-13g ranges. (For heavier cartridges Like the ZU, you will also need to purchase the Extra Heavy Counterweight below). The chosen counterweight is fitted to a slider bush that travels on a new, stainless steel stub shaft. An aluminum vernier knob that screws onto the rear of the stub shaft allows precise, calibrated adjustment of tracking weight in increments of one tenth of a gram. The Counterweight itself is underslung below the main axis of the arm tube to bring the centre of gravity of the whole arm tube assembly in line with the stylus tip. The TecnoWeight’s precision engineering and fine adjustment capability provides a significant sound improvement. The replacement of the plastic stub shaft and large diameter counterweight, allow for much more control, precision and detail in musical reproduction. When used with RB300/301/303/600 arms, the TecnoWeight dispenses with the need to use the arm’s own somewhat questionable tracking force system, which further improves sound reproduction. The TecnoWeight is standard on Michell’s flagship TecnoArm.

The fibers are in two rows with a static grounding pad centered between. The grounding pad supports the tiny carbon fibers and keeps them erect so they can dig down deep into the groove and extract trapped dust. Look at a record; it contains microscopic undulations inside the groove wall smaller than a human hair that the naked eye cannot see. This is how music is stored on an lp. And this is why fat pads will not do.

A fat pad can’t get down into the groove. It simply brushes over the top and removes the surface dust. The real culprit is the dust that’s trapped deep in the record groove. The only way to remove this dust is with the hunt eda

This hybrid design has an inner sleeve of hand-crafted mahogany made by using the new series ‘e’ curing process. Its outer housing, machined from aluminum then chrome-plated, utilizes a special processing and casting method to increase the porosity of the alloy. This combination of wood and metal insures that the earphone chamber has no ‘ringing’ which might obscure detail or add coloration. The way the wood and metal housing moves air and reacts to sound vibrations is virtually unaffected by transient distortions. Grado has also designed the cable for the PS1000e; the twelve-conductor cable design uses UHPLC (Ultra-High Purity, Long Crystal) copper, improves control and stability of the total range of the frequency spectrum. The PS1000e also has a new 50mm driver and a newly re-configured voice coil and diaphragm design, resulting in unsurpassed speed and accuracy responses.

​ The PS500e is the younger brother to the PS1000e, with newly redesigned 44mm speaker and the improved 8 conductor cable design and a smaller metal and wood hybrid air chamber. Both the hidden mahogany core and and powder-coated aluminum housing parts under-go damping treatments that help control and dissipate resonances, for an undistorted flow of the musical signal. The PS500e boasts an overall sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end. The PS500e is a compact monitoring tool that will put a smile on the face of the most demanding music professionals, as well as the most demanding audiophiles.

The RS2e is the little brother of the RS1e but is just as aesthetically pleasing, now utilizing our proprietary curing process that gives a new, lighter look. The RS2e has a 44mm driver and uses The e Series 8 conductor cable design. The hand-crafted mahogany utilizes new advanced damping treatments that help control and dissipate resonances.The RS2e still maintains an overall sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end. These truly are an audiophiles dream.​

The new RS1e from Grado uses a different species of handcrafted mahogany from our previous models. The earpieces utilize an intricate curing process that optimizes the tonal quality while giving them a new look. The RS1e places a 50mm dynamic transducer and an 8 conductor cable design in an open-air configuration. The result is a smooth, controlled, and coherent sound with detailed dynamics. Frequency response ranges from 12-30 kHz and the drivers are matched to 0.05dB. Weighing 9oz, the headphones are an example of the wonders of Mother Nature with a gorgeous light mahogany look. The RS1e is a masterpiece in the Grado collection.

The Top of the Range Prestige Series Headphone. The new SR325e has a new driver and cable design. The added mass from the metal housing minimizes transient distortions. With the new 8 conductor cable design you will notice superb control and stability of the upper and lower range of the frequency spectrum, with both supporting Grado’s world renowned midrange. The SR325e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

This headphone has sizable rear air flow through a metal screen, while utilizing Grado’s larger ear cushion and closely matched drivers. The result is a broad soundstage free from colorations. The way the SR225e’s new driver, cable and plastic housing move air and react to sound vibrations is virtually unaffected by transient distortions. Bass, midrange and treble are all more wide open and you will enjoy the fine tonal spread and balance. The SR225e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

Grado has taken one of the world’s most legendary headphones and made it even better. The SR80e has a new driver design, a new polymer to damp resonant distortion in the plastic housing, and a new cable from plug to driver connection. The way the SR80e’s new driver and plastic housing move air and react to sound vibrations virtually eliminate transient distortions. This allows the signal flow over the new cable to reproduce sound that has improved tight control of the upper and lower range of the frequency spectrum, while supporting Grado’s world renowned midrange. The SR80e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

​ Grado has taken one of the world’s most legendary headphones and made it even better. The SR60e has a new driver design, a new polymer to better damp resonant distortion in the plastic housing, and a new cable from plug to driver connection. The way the SR60e’s new driver and plastic housing move air and react to sound vibrations virtually eliminate transient distortions. This allows the signal flow over the new cable to reproduce sound that has tight control of the upper and lower range of the frequency spectrum, while supporting Grado’s world renowned midrange. The SR60e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

Easy to use and inexpensive, this is the most popular stylus force gauge on the market. An indispensable tool for any analog setup. The Shure SFG-2 Stylus Tracking Force Gauge is the industry standard. This simple-to-use measuring device was developed to give listeners a way to insure against the problems caused by improper tracking force settings, which include mistracking, excessive record and tip wear, and poor sound reproduction. This gauge is a highly accurate beam balance instrument designed to measure the actual downward force exerted by a stylus on a record over the range of 0.5 to 3.0 grams. Each gauge is individually factory calibrated in order to provide a precise measurement of stylus tracking force.