2
Yes
None
1
1000000
Name...
/products-2/
Thumbnail
Filter
Sort By:

Categories:

Manufacturer

Loudspeakers
Turntables
Accessories
Grado eGrado
$49.

Designed for the portable electronics market, our goal was to create a street-style headphone that will sonically outperform anything available in the affordable portable market. The eGrado is functionally stylish, lightweight and comfortable. By incorporating the same drivers used in our highly regarded SR60 headphones, we can proudly state that we are indeed the high end choice in the portable market. The eGrado features a behind the neck headband that is comfortable and stylish. We have indeed kept the highly praised Grado sound at a price point that is within reach of all.

Rega TT-PSU
$395.

The new TT-PSU, housed in our new style case, has a new anti-vibration circuit, output circuit protection and improved power supply regulation. Offering the convenience of electronic speed change, reduced motor noise and increased stability for all Rega 24v motor turntables.

The TT-PSU is an ideal upgrade path for the RP3 or the RP1 (RP1 when fitted with the 24v motor upgrade kit).

Okki Nokki
$499.

The King of Clean Vinyl

  • Fully automatic European-designed Record Cleaning Machine
  • Cool running turntable allows for hours of use
  • Quiet motor leaves sanity intact
  • Forward and reverse motor for deep cleaning
  • Vacuum tubes for 7″ and 10″ records available
  • Comes with proprietary record cleaning fluid and goat-hair brush
Magnum Dynalab ST-2
$119.

This FM Antenna receives distant FM stations from all directions!

A more powerful FM Antenna than any single element dipole antenna, the ST-2 vertical antenna is probably one of the best things ever to happen to FM listeners in urban and fringe reception areas alike.

Concentrating its reception “focus” only on the horizontal plane, the ST-2 FM Antenna is capable of getting more signal to your FM tuner with less “flutter” and “fading.”

The ST-2 FM Antenna is also less susceptible to “multipath interference,” due to its unique vertical polarization.

Lyra SPT
$50.

(SPT) is a purified water-based, non-alcohol stylus cleaner that helps keep cartridge styli scrupulously clean.

In addition to highly purified water, SPT contains only very small amounts of organic chemical cleaning agents. SPT has proven to be completely safe to use with all phono cartridges (not only LYRA’s).

Whatever the cartridge, excessive amounts of liquid should never be applied to the stylus and cantilever.

A key component of SPT is the accompanying brush which has been designed with super-soft bristles. Thanks to the bristles it is OK to drag the brush across the diamond stylus of the cartridge. Most other stylus brushes on the market have harder bristles that are not gentle with the diamond stylus, and could potentially cause damage. Even the LYRA brush must not be allowed to come into contact with any other part of the cartridge.

Michell Engineering TecnoWeight​
$179.

John Michell, one of audio’s best known and most respected audio engineers, designed this versatile, precision-engineered, geometrically correct counterweight system, suitable for all Rega arms and their various derivatives. This all stainless steel device will fit the Rega RB100/101/202/250/300/301/303/600/700/900/1000 arms and their variants such as Moth, Audio Note, Goldring, and Origin Live OL-1 arms. (Will NOT fit any other OL arms). The TecnoWeight will handle a wide range of cartridges, with weights from 3g to 13g. This versatility is achieved by supplying two different counterweights for cartridges in the 3-6g and 6-13g ranges. (For heavier cartridges Like the ZU, you will also need to purchase the Extra Heavy Counterweight below). The chosen counterweight is fitted to a slider bush that travels on a new, stainless steel stub shaft. An aluminum vernier knob that screws onto the rear of the stub shaft allows precise, calibrated adjustment of tracking weight in increments of one tenth of a gram. The Counterweight itself is underslung below the main axis of the arm tube to bring the centre of gravity of the whole arm tube assembly in line with the stylus tip. The TecnoWeight’s precision engineering and fine adjustment capability provides a significant sound improvement. The replacement of the plastic stub shaft and large diameter counterweight, allow for much more control, precision and detail in musical reproduction. When used with RB300/301/303/600 arms, the TecnoWeight dispenses with the need to use the arm’s own somewhat questionable tracking force system, which further improves sound reproduction. The TecnoWeight is standard on Michell’s flagship TecnoArm.

Hunt EDA Mk 6
$30.

The fibers are in two rows with a static grounding pad centered between. The grounding pad supports the tiny carbon fibers and keeps them erect so they can dig down deep into the groove and extract trapped dust. Look at a record; it contains microscopic undulations inside the groove wall smaller than a human hair that the naked eye cannot see. This is how music is stored on an lp. And this is why fat pads will not do.

A fat pad can’t get down into the groove. It simply brushes over the top and removes the surface dust. The real culprit is the dust that’s trapped deep in the record groove. The only way to remove this dust is with the hunt eda

Grado PS 1000e
$1695.

This hybrid design has an inner sleeve of hand-crafted mahogany made by using the new series ‘e’ curing process. Its outer housing, machined from aluminum then chrome-plated, utilizes a special processing and casting method to increase the porosity of the alloy. This combination of wood and metal insures that the earphone chamber has no ‘ringing’ which might obscure detail or add coloration. The way the wood and metal housing moves air and reacts to sound vibrations is virtually unaffected by transient distortions. Grado has also designed the cable for the PS1000e; the twelve-conductor cable design uses UHPLC (Ultra-High Purity, Long Crystal) copper, improves control and stability of the total range of the frequency spectrum. The PS1000e also has a new 50mm driver and a newly re-configured voice coil and diaphragm design, resulting in unsurpassed speed and accuracy responses.

Grado PS 500e
$595.

​ The PS500e is the younger brother to the PS1000e, with newly redesigned 44mm speaker and the improved 8 conductor cable design and a smaller metal and wood hybrid air chamber. Both the hidden mahogany core and and powder-coated aluminum housing parts under-go damping treatments that help control and dissipate resonances, for an undistorted flow of the musical signal. The PS500e boasts an overall sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end. The PS500e is a compact monitoring tool that will put a smile on the face of the most demanding music professionals, as well as the most demanding audiophiles.

Grado RS 2eGS 1000e
$995.
Grado RS 2e
$495.

The RS2e is the little brother of the RS1e but is just as aesthetically pleasing, now utilizing our proprietary curing process that gives a new, lighter look. The RS2e has a 44mm driver and uses The e Series 8 conductor cable design. The hand-crafted mahogany utilizes new advanced damping treatments that help control and dissipate resonances.The RS2e still maintains an overall sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end. These truly are an audiophiles dream.​

Grado RS 1e
$695.

The new RS1e from Grado uses a different species of handcrafted mahogany from our previous models. The earpieces utilize an intricate curing process that optimizes the tonal quality while giving them a new look. The RS1e places a 50mm dynamic transducer and an 8 conductor cable design in an open-air configuration. The result is a smooth, controlled, and coherent sound with detailed dynamics. Frequency response ranges from 12-30 kHz and the drivers are matched to 0.05dB. Weighing 9oz, the headphones are an example of the wonders of Mother Nature with a gorgeous light mahogany look. The RS1e is a masterpiece in the Grado collection.

Grado SR 325e
$295.

The Top of the Range Prestige Series Headphone. The new SR325e has a new driver and cable design. The added mass from the metal housing minimizes transient distortions. With the new 8 conductor cable design you will notice superb control and stability of the upper and lower range of the frequency spectrum, with both supporting Grado’s world renowned midrange. The SR325e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

Grado SR 225e
$200.

This headphone has sizable rear air flow through a metal screen, while utilizing Grado’s larger ear cushion and closely matched drivers. The result is a broad soundstage free from colorations. The way the SR225e’s new driver, cable and plastic housing move air and react to sound vibrations is virtually unaffected by transient distortions. Bass, midrange and treble are all more wide open and you will enjoy the fine tonal spread and balance. The SR225e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

Grado SR 125e
$150.
Grado SR 80e
$99.

Grado has taken one of the world’s most legendary headphones and made it even better. The SR80e has a new driver design, a new polymer to damp resonant distortion in the plastic housing, and a new cable from plug to driver connection. The way the SR80e’s new driver and plastic housing move air and react to sound vibrations virtually eliminate transient distortions. This allows the signal flow over the new cable to reproduce sound that has improved tight control of the upper and lower range of the frequency spectrum, while supporting Grado’s world renowned midrange. The SR80e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

Grado SR 60e
$79.

​ Grado has taken one of the world’s most legendary headphones and made it even better. The SR60e has a new driver design, a new polymer to better damp resonant distortion in the plastic housing, and a new cable from plug to driver connection. The way the SR60e’s new driver and plastic housing move air and react to sound vibrations virtually eliminate transient distortions. This allows the signal flow over the new cable to reproduce sound that has tight control of the upper and lower range of the frequency spectrum, while supporting Grado’s world renowned midrange. The SR60e will produce a sound that is pure Grado, with warm harmonic colors, rich full bodied vocals, excellent dynamics, and an ultra-smooth top end.

Shure SFG-2​
$36.

Easy to use and inexpensive, this is the most popular stylus force gauge on the market. An indispensable tool for any analog setup. The Shure SFG-2 Stylus Tracking Force Gauge is the industry standard. This simple-to-use measuring device was developed to give listeners a way to insure against the problems caused by improper tracking force settings, which include mistracking, excessive record and tip wear, and poor sound reproduction. This gauge is a highly accurate beam balance instrument designed to measure the actual downward force exerted by a stylus on a record over the range of 0.5 to 3.0 grams. Each gauge is individually factory calibrated in order to provide a precise measurement of stylus tracking force.

Amplifiers
Rogue Apollo Monoblock​
$10,995.

Elegant and refined, yet brutally powerful, Rogue Audio’s flagship monoblock amplifiers have raised the bar for reference level amplification. The Apollo’s ability to reveal the finest musical details while providing seemingly limitless dynamics are the hallmark of the finest amplifiers we have ever produced. Whether your passion is jazz, rock or symphonic works, these amplifiers will provide the clarity and dynamics to closely rival the original performance.

That these pure tube amplifiers boast a continuous power output of over 250 watts is but a small part of the story. Designed and engineered without compromise, the Apollos boast ruler flat frequncy response, tremendous bandwidth, huge dynamic range, and vanishingly low levels of distortion. And the enormous LC power supplies enable the reproduction of musical transients at far beyond the amplifier’s rated output. With a unique and tasteful appearance, the Apollo chassis’ are constructed using CNC machined aluminum faceplates and body panels. The ultra-high tolerance electronics components and huge transformers contribute to the peerless build quality. Features include an on-the-fly switch offering either Triode or Ultralinear operation. A second standby switch allows the amplifier to remain warmed up and ready for immediate use between listening sessions. A built in meter and individual bias switches makes tube biasing a snap even for the tube novice. The rear panel contains balanced and single ended inputs as well as 4 and 8 ohm Cardas binding posts.

Rogue M-180 Monoblock
$5,995.

Power, Grace, and Precision — when you are ready for the ultimate in vacuum tube amplification, look no further than the Rogue Audio M-180 monoblocks. With 180 Watts of pure tube power, these monoblocks stunningly accomplish the impossible. After drawing the curtains aside on a soundstage of full height, width, and depth, the pace and musicality of the M-Series provide a riveting performance that will leave you breathless. And along with their profound sonic merits, the monoblocks are aesthetically exquisite amplifiers that will stoically serve as the cornerstones of your system.

Using circuitry derived from our Apollo amplifiers, the M-180s are marked by an exceptional design that places it squarely at the forefront of tube technology. Just a few of the notable features are a “slow start” logical turn-on for extended tube life, a massive high capacity power supply, and the ability to externally switch between either ultra-linear or pure triode operation.The highly efficient design also means cool running and greatly extended tube life. Other refinements include balanced (XLR) and RCA inputs, mechanically isolated transformers, matched octets of KT120 output tubes, and separate 4 and 8 ohm taps on the rear. In keeping with Rogue Audio’s “quality by design” philosophy, only the finest components are used in the construction of these remarkable amplifiers. See for yourself why the M-180 monoblocks are a Stereophile Magazine “Class A Recommended Component.”

Rogue Stereo 100
$3,495.

Whether your tastes run to the delicate strains of the violin or the wail of the electric guitar, the Rogue Stereo 100 power amplifier will thrill you with its precision, musicality, and impact. And with 100 watts of pure tube power, you can be sure that your amplifier won’t run out of steam before the musicians do. The heart of the Stereo 100 consists of four matched KT120 output tubes operating in push-pull configuration. A massive fully regulated power supply ensures that low frequency information will not go unheard, and that the power and attack of transient musical passages will be recreated in full. And with a simple flip of a switch, audiophiles can choose between “pure triode” and “ultra-linear” operation to suit their tastes and power requirements. The transparency and power of the Stereo 100 is testimony to a design that truly transcends that of the competition.

While the build quality is readily evidenced in the exquisitely sculpted appearance of the Stereo 100, the beauty of this amplifier is more than just skin deep. From the Mundorf EVO Oil coupling capacitors to the custom wound output transformers, the audio signal travels through only the finest components available. With this winning combination of leading edge circuit topology, great components, and a stunning appearance, you can be certain that you are investing in an amplifier design that only Rogue Audio can deliver.

Rogue Hydra
$2,995.

Imagine a new kind of amplifier that combines the best of both the solid state and tube technologies. An energy efficient “green” design requiring no tube biasing or regular maintenance. An amplifier having the smooth and organic sound that only tubes can provide combined with the dynamics and slam of the solid state. Such an amplifier now exists! Critics are already using words like “Groundbreaking” and “Revolutionary” to describe our new tube/Class D hybrid amplifiers.

These new amplifiers are much more than simply a tube circuit placed in front of a class D output section.  Our proprietary tubeD™ circuit topology actually integrates the tube section into the amplifier yielding the smooth natural sound that only a tube amp can provide. With almost uncanny accuracy the Hydra and Medusa deliver stunning dynamics and transparency without any of the edgy, etched or grainy sound that often accompanies solid state designs. A low power standby mode allows critical amplifier sections to remain continuously powered on (if desired) and a slow start feature allows the tubes to warm up gradually to eliminate turn-on noise and greatly extend tube life. Three massive linear power supplies are used to power the amplifier circuitry and ultra-high quality parts are used exclusively throughout the design. Combined with a stunning appearance, you can be certain that you are investing in an amplifier that truly represents the very leading edge of audio technology.

Rogue Medusa
$3,995.

Imagine a new kind of amplifier that combines the best of both the solid state and tube technologies. An energy efficient “green” design requiring no tube biasing or regular maintenance. An amplifier having the smooth and organic sound that only tubes can provide combined with the dynamics and slam of the solid state. Such an amplifier now exists! Critics are already using words like “Groundbreaking” and “Revolutionary” to describe our new tube/Class D hybrid amplifiers.

These new amplifiers are much more than simply a tube circuit placed in front of a class D output section.  Our proprietary tubeD™ circuit topology actually integrates the tube section into the amplifier yielding the smooth natural sound that only a tube amp can provide. With almost uncanny accuracy the Hydra and Medusa deliver stunning dynamics and transparency without any of the edgy, etched or grainy sound that often accompanies solid state designs. A low power standby mode allows critical amplifier sections to remain continuously powered on (if desired) and a slow start feature allows the tubes to warm up gradually to eliminate turn-on noise and greatly extend tube life. Three massive linear power supplies are used to power the amplifier circuitry and ultra-high quality parts are used exclusively throughout the design. Combined with a stunning appearance, you can be certain that you are investing in an amplifier that truly represents the very leading edge of audio technology.

Rogue Atlas Magnum II
$2,395.

The Atlas Magnum was designed to box outside of its weight class and in that spirit it is truly a world champion. Handily outperforming amplifiers costing many times its price, the Rogue Atlas sets a new standard in affordable tube amplification. With circuitry borrowed from our most advanced amplifier designs, the Atlas effortlessly conveys the detail and nuance of even the most complex musical passages. And with 100 WPC of pure tube power on tap, the Atlas is capable of realistic volume levels that will rival the clarity and presence of the original performance.

From a technical standpoint, the Atlas represents the cutting edge of tube amplifier design. An oversized linear power supply stores tremendous energy for the dynamic headroom great performances demand. The tube circuitry is first rate with short signal paths and low noise design. Finally, precision components are used to provide the transparency and air that are so critical to accurate musical reproduction.

Creek Evolution 100P
$1,995.
  • POWER OUTPUT >110 Watts into 8 Ohms
  • POWER OUTPUT >170 Watts into 4 Ohms
  • CONTINUOUS CURRENT >8.5 Amps (sine wave)
  • MAX CURRENT > 26 Amps, current burst into 0.5 Ohms
  • OUTPUT IMPEDANCE <0.05 Ohms @ 1KHz
  • THD < 0.002% 20Hz – 20KHz
  • SNR >102dB
  • FREQUENCY RESPONSE 10Hz – 100KHz +/- 2dB Line
  • GAIN 33.3dB (x46)
  • INPUT SENSITIVITY 650mV
  • INPUT IMPEDANCE 47k Ohms unbalanced, 30k Ohms balanced
  • CROSSTALK -80dB at 1Khz
  • DC OFFEST < +/-10mV
  • SLEW RATE >30 V per uS
  • INPUTS RCA unbalanced – XLR balanced
  • OUTPUTS 2 Pairs of high quality binding posts
  • OPERATING VOLTAGES 110V/230V Switchable
  • CONSUMPTION (AT IDLE) <20 Watts (no standby)
  • CONSUMPTION (AT FULL POWER) 500 Watts
  • WEIGHT 9Kgs
  • DIMENSIONS 430x60x280mm W/H/D
Creek Evolution 50P
$995.
  • POWER OUTPUT >55 Watts into 8 Ohms
  • POWER OUTPUT >85 Watts into 4 Ohms
  • CONTINUOUS CURRENT >8.5 Amps (sine wave)
  • MAX CURRENT +/- 26 Amps, current burst into 0.5 Ohms
  • OUTPUT IMPEDANCE <0.1 Ohms @ 1KHz
  • THD < 0.005% 20Hz – 20KHz
  • SNR >102dB
  • FREQUENCY RESPONSE 10Hz – 100KHz +/- 2dB Line
  • GAIN 33.3dB (x46)
  • INPUT SENSITIVITY 410mV
  • INPUT IMPEDANCE 47k Ohms unbalanced, 30k Ohms balanced
  • CROSSTALK -80dB at 1Khz
  • DC OFFEST < +/-10mV
  • SLEW RATE >30 V per uS
  • INPUTS RCA unbalanced – XLR balanced
  • OUTPUTS 1 Pair of high quality binding posts
  • OPERATING VOLTAGES 110V/230V Switchable
  • CONSUMPTION (AT IDLE) <20 Watts (no standby)
  • CONSUMPTION (AT FULL POWER) 350 Watts
  • WEIGHT 7.5Kgs
  • DIMENSIONS 430x60x280mm W/H/D
Rogue Apollo Dark Monoblock
$14,995.

In the recent past we have quietly built some very special amplifiers for critical product launches. These amps were built for other audio companies who wanted to showcase their most expensive loudspeakers and components at important events such as the CES. These industry insiders recognized just how good the Apollo monoblocks already were but asked us to take them a step further. Our response was the Apollo “Dark” monoblocks. Using the Apollo platform as the basis, we enlarged and improved the power supply and made numerous circuit and component upgrades that significantly improve the transparency and dynamics of an already excellent amplifier.

Based on the overwhelmingly positive response within the industry, we have decided to make the Apollo Darks available to select retailers.

Cables
StraightWire Musicable II IC
$

Musicable II IC is a favorite for unleashing the potential of digital surround sound receivers, DVD and CD players, music servers, MP3 players, DVRs, subwoofers and other components. Its advanced polypropylene insulation in a balanced Star Quad design brings out the depth and subtleties from your favorite recordings. Dual shields are great at rejecting noise for long runs.

StraightWire SOUNDSTAGE SC Speaker Cable
$

OUNDSTAGE SC: eclipses competing cables in this class with an eight conductor helix design of OFHC conductors that excels in midrange precision and focused highs; both positioned in a 3-D soundstage. Polypropylene insulation and a low resonant, low density mechanical core deliver tight, controlled lower registers

StraightWire SYMPHONY SC Speaker Cable
$

SYMPHONY SC combines 8 large conductor groups of 16awg  with Straight Wire’s proprietary Foam TPR Hybrid insulation to achieve remarkable full developed bass, rich midrange and commensurate  upper registers. Symphony can help tame small reflective room issues  to deliver appropriate soundstage air space and requisite musical  subtleties for high grade digital receiver based systems. Symphony SC is the high value choice for many 2 channel and premium theater speaker applications.

StraightWire OCTAVE II SC Speaker Cable
$

OCTAVE II features eight CCT (Compressed Conductor Technology)  OFHC copper conductor groupings with advanced foam polypropylene insulation for a significant advance in detail and precision. Compressing each conductor group achieves the best electrical and mechanical attributes of both solid core and stranded technologies. Linearity and consistency with focus,
depth and musicality – Octave II is great choice for serious
audio enthusiasts and has low enough resistance for long run use.

StraightWire Rhapsody SC Speaker Cable
$

Rhapsody S Advanced Helix design uses the same premium silver plated conductors and advanced foamed polypropylene materials found in the matching Rhapsody S interconnect. Ideal for listeners who prefer crisp yet not edgy highs with a full, but never loose, bass foundation. Rendering of spatial details is accomplished with convincing weight and outstanding dynamic contrast. Mid level frequencies and vocals are rendered in remarkable fashion with great sibilance.Rhapsody S is universally compatible with nearly all speakers. Great choice for internal bi-wiring applications and larger rooms with less reflective elements.

StraightWire Expressivo SC Speaker Cable
$

Expressivo: a unique, premium bi-wireable speaker cable. It incorporates Compressed Conductor Technology (CCT) with  4 positive “air suspended” conductors at 15AWG of OFHC Copper,  multiple low dielectric insulations are employed to optimize mechanical and electrical performance. This low resistance speaker cable utilizes two opposing spiral shields for the negative conductor path(s) and familiar Straight Wire anti-static micro-fiber braid.

The cable is custom jacketed with a durable mesh (various color options at no up-charge) rather than the Straight Wire traditional clear jacket.  This is to preserve micro-details of the Expressivo unique “air suspension” design. Ideal for high level separate components and LCR speakers in high level multichannel applications.

StraightWire SERENADE II SC Speaker Cable
$

SERENADE II SC Advanced Helical design featuring “CCT” (compressed copper technology) conductors and super foamed dual PTFE / polypropylene insulation. Serenade delivers an engaging, full soundstage for true “lifelike” performance. You hear all of the details and inflections of the performance totally unrestricted by this low resistance speaker cable. The “baby brother” to Crescendo has amazed many in the industry by offering such reference level performance attributes at such as reasonable price. Worthy of an audition with any high level separate component based system.

StraightWire EXPRESSIVO GRANDE SC Speaker Cable
$

EXPRESSIVO GRANDE speaker cable is composed of 6 (CCT)  positive “air suspended” conductors at 15AWG of OFHC Copper around a non-conductive, low resonant core. Multiple low dielectric insulations are employed to optimize mechanical and electrical performance. This ULTRA low resistance speaker cable utilizes dual opposing spiral shields for the negative conductor path(s) and familiar Straight Wire anti-static micro-fiber braid.

The cable is custom jacketed with a durable mesh (various color
options at no up-charge) rather than the Straight Wire traditional clear jacket. This preserves the micro-details throughout the audible spectrum for clear and effortless presentations. Critical enthusiasts should audition this cable together with Serenade SC to find the ideal compliment for their high level system(s).

StraightWire VIRTUOSO H SC Speaker Cable
$

VIRTUOSO H speaker cable featuring a unique cable structure, which incorporates the best aspects of our renowned SYMMETRICAL COAXIAL and ADVANCED HELIX designs. Six stranded conductor groups of heavy Silver Plated OFHC Copper are compressed and helically twisted around a non-conductive core to comprise the positive conductor group. Two Silver Plated OFHC braid shields with a Foam Polypropylene dielectric between them comprise the negative conductor group. The inner helical positive conductors permit effortless dynamics, a full luscious midrange and sound stage realism. The negative braid shields offer symmetrical electromagnetic control for pinpoint high frequency details, tight controlled bass and other mechanical advantages.

StraightWire Chorus II SC Speaker Cable
$

Chorus II SC Our versatile 12awg / 4 conductor speaker cable enables clear, crist mid and high registers with full, authoritative bass. Featuring Polypropylene insulation and OFHC conductors, Chorus will provide a powerful yet controlled performance at an economical cost, especially for digital AV receiver based systems requiring long run speaker cables .

StraightWire Musicable SC Speaker Cable
$

Musicable SC helps your speakers reproduce the delicate high frequency range via the use of OFHC (Oxygen Free High Conductivity) conductors and polypropylene insulation in a quad twist. Accurate midrange and vocals together with controlled base combine to deliver a detailed, lifelike presentation.

StraightWire Chorus AG IC Interconnect
$

Chorus AG IC reveals the details in your favorite movies and music to improve your home entertainment experience. Sintered Foam PTFE insulation and silver plated OFC conductors produce great sonic realism and depth. Chorus AG utilizes an advanced symmetrical coaxial design to deliver an uncompromised signal including pinpoint details and tight, accurate bass. It will capture and release all the subtleties that you enjoy hearing.

StraightWire Symphony II IC Interconnect
$

Symphony II IC enhances the presentation capabilities of better electronics. Its silky midrange and rich, extended bass retrieval abilities convey all the natural texture of vocals and instruments. It incorporates special Foam TPR insulation around OFHC copper conductor groups in a balanced Star Quad design. Great for mid level integrated amps, components with discreet analog audio circuitry, better subwoofers and better digital equipment!

StraightWire ​Encore II IC Interconnect
$

Encore II IC utilizes OFHC conductors with the highest grade of Foam Poly-propylene insulation for uncolored presentation with engaging vocals. Straight Wire’s most advanced Star-Quad design, Encore II, provides realistic tight bass and true upper frequencies regardless of cable length. This cable’s high compatibility with nearly all components makes it a clear choice above the competition. Discover the significant improvement Encore II can make with today’s top rated digital receivers and most separate components.

StraightWire Rhapsody S IC Interconnect
$

Rhapsody S IC was developed from a low resistance, helical design foundation employing six conductor groups, Silver coated OFHC copper delivers detailed articulation of all frequencies with luxurious musicality. Foam Polypropylene insulation encapsulates each group in a low dielectric environment. You’ll enter a holographic soundstage just like the original recording venue. Acknowledged interconnect selection of knowledgeable industry personnel for trade show demonstrations.

StraightWire Expressivo IC Interconnect
$

Expressivo IC incorporates Compressed Conductor Technology
(CCT) with 4  “air suspended” conductors at 21 awg (American Wire Gauge) of compressed OFHC Copper.  Multiple low dielectric insulations optimize mechanical and electrical performance. It combines CCT with a modified Star Quad Helix design that conveys musical nuances together with dynamic passages in a lifelike, un-restrained balance for highly refined components.

The air space and soundstage are remarkably well defined with a uick, accurate pace. Upper register frequencies have appropriate speed and timbre with clear harmonic structure. Mid level passages offer natural sibilance and emotional character that bring you closer to your favorite recordings. Mid-bass is tight with appropriate decay while lower registers are full of force with true impact.​

StraightWire Serenade II IC Interconnect
$

Serenade II IC employs Certified CDA 101 copper conductors in a low resistance, advanced Helix CCT (Compressed Conductor Technology) design. It conveys musical structure and dynamic passages with great focus and clarity.  Mid bass weight and midrange coherence are elevated in this “baby brother” to the award-winning Crescendo  It captivates the listener with an effortless  conveyance of the original air space and details. Unrestricted performance. pristine highs, brilliant mid range and vigorous bass are obvious when used in concert with high level audio components. Serenade II delivers all of the nuances of your favorite source materials.

StraightWire Virtuoso R IC Interconnect
$

Virtuoso R: strikes the captivating balance of articulation and lifelike musical presentation with distinguished coherency and dynamics.
Premium individually coated Silver/Copper conductors in an advanced Dual Symmetrical Helix design have undergone such extensive refinement nor been scrutinized by as many critical music lovers.

Many of the world’s most respected audiophile manufactures rely on Virtuoso interconnects for the final “voicing” of their reference systems.  We hope that you too will also trust Virtuoso to serve in your reference system. It performs equally well in both solid state and tube based systems.

StraightWire Crescendo 3 IC Interconnect
$

Crescendo 3: is a dramatic departure from all existing interconnect designs. No other Straight Wire cable has utilized the advanced field testing and dealer input or undergone such minute refinement. With an advanced helix array of many conductor groups, it has the lowest resistance of any interconnect. All dynamic constraints are eliminated; remaining is the most holographically believable soundscape, capable of transporting the listener to the original recording space.

With Crescendo, music more than captivates the listener. You’ll distinguish each musician and their instrument. Without the slightest hint of grain or glare, you’ll take in every ounce of detail, allowing you to hear the entire performance venue. This component is for a select few who have the resources and environment to truly appreciate such a cable.

StraightWire CRESCENDO 3 SC Speaker Cable
$

CRESCENDO 3 speaker cable offers technical and sonic advances the over the highly acclaimed original version. The inner core has seven equal diameter TPR hollow tubes vs. one large PE tube. This allows for greater flexibility and lower mechanical resonances. The (12) large conductive groups have modified Dual insulation of soft” Foam PTFE and “hard” Foam Polypropylene. Conductor group resistance remained the same while compression was modified.

Crescendo speaker cable was the first Compressed Conductor Technology (CCT) design produced by Straight Wire. This design combines the best attributes of solid-core and stranded conductor technology. Extreme care was given to the degree of conductor compression and pressure of the Foam Polypropylene insulation.

Crescendo 3 provides mechanical and electrical advancements beyond original Crescendo speaker cable. Lifelike preservation of low level details coupled with unmatched dynamics and detail are easy to discern with this cable. It synergizes reference caliber components to provide captivating performances.​

Cartridges
Charisma Audio Model 103
$750.
  • Cartridge Weight: 8.8 g
  • Cartridge Body: birdseye maple wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with OFC copper
  • Output Voltage: 0.32 mV at 3.54 cm/sec.
  • Internal Impedance: 40 ohms
  • Frequency Response: 20 – 45,000 Hz ± 1 dB
  • Channel Balance: better than 1 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 7 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.1 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 30 hours
Grado The Statement V2
$3,500.
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 8-70 KHZ
  • CHANNEL SEPARATION: AVERAGE 45 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado The Reference V2
$1,500.
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ
  • CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado Master V2
$1,000.
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ
  • CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado Sonata V2
$600.
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ
  • CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Grado Platinum V2
$350.
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ
  • CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS
Dynavector XV-1t​
$9,450.
  • Type: Low output moving coil cartridge with multi Alnico magnets and the Flux damper
  • Output Voltage: 0.35mV (at 1KHz, 5cm/sec.)
  • Channel Separation: 30 dB (at 1KHz)
  • Channel balance: 1.0 dB (at 1KHz)
  • Frequency response: 20 – 20,000Hz (± 1dB)
  • Compliance: 10 x 10-6 cm/dyn
  • Tracking force: 1.8 – 2.2 grams
  • Impedance: R=24 ohms
  • Recommended load resistance: > 75 ohms
  • Cantilever: 6mm length 0.3 mm dia. solid boron with a special armaturer
  • Stylus tip: PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight: 12.0 grams
Dynavector XV-1S
$5,650.
  • Type Low output moving coil cartridge with Multi alnico magnets and Flux damper
  • Output Voltage 0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation 30 dB (at 1KHz)
  • Channel balance 1.0 dB (at 1KHz)
  • Frequency response 20 – 20,000Hz (± 1dB)
  • Compliance 10 x 10-6 cm/dyn
  • Tracking force 1.8 – 2.2 grams
  • Impedance R=6 ohms, L=18 micro Henry
  • Recommended load resistance > 30 ohms Stylus 0.14 x 0.08 mm Line contact PF
  • Weight 12.6 grams
Dynavector Te Kaitora Rua
$3,450.
  • Type low output moving coil cartridge with flux damper and alnico magnet
  • Output Voltage  0.26mV (at 1KHz, 5cm/sec.)
  • Channel Separation  30 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 1dB)
  • Compliance  10 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2 grams
  • DC resistance  R=5 ohms
  • Recommended load
  • impedance  >30 ohms
  • Cantilever  6mm length solid boron
  • Stylus  PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight  9.8 grams
Dynavector XX2 Mk2
$1,995.
  • Type Low output moving coil cartridge with Alnico magnet and Flux damper
  • Output Voltage 0.28mV (at 1KHz, 5cm/sec.)
  • Channel Separation 30 dB (at 1KHz)
  • Channel balance 1.0 dB (at 1KHz)
  • Frequency response 20 – 20,000Hz (± 1dB)
  • Compliance 10 x 10-6 cm/dyn
  • Tracking force 1.8 – 2.2 grams
  • Impedance R=6 ohms
  • Recommended load resistance > 30 ohms
  • Cantilever 6mm length 0.3 mm dia. solid boron
  • Stylus PF Line contact shape, stylus radius: 7 x 30 micron
  • Weight 8.9 grams
Dynavector 17D3
$1,350.
  • Type  Low output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage  0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation  25 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 1dB), 20 – 100,000Hz
  • Compliance  15 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2grams
  • DC resistance  R=32 ohms
  • Recommended load
  • resistance  > 100 ohms
  • Cantilever  1.7mm length, 0.25dia solid diamond
  • Stylus  Micro-Ridge
  • Weight  5.8 grams
Dynavector DV-20x2 L or H
$995.
  • Cartridge Weight: 7.1 g
  • Cartridge Body: amboyna burl wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with ultra high purity single crystal copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
  • OUTPUT: 1mV @ 5 CMV
  • CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ
  • CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ
  • LOAD: 47,000 OHMS
  • INDUCTANCE: 30 mh
  • RESISTANCE: 72 OHMS
  • NON SENSITIVE TO CAPACITIVE LOAD
  • CHASSIS MASS: 10 GRAMS
  • TRACKING FORCE: 1.5 – 1.9 GRAMS

XV-1t​     $9,450

Reference One​      $2,200

     The Statement V2        $3,500

  • Cartridge Weight: 12 g
  • Cantilever: sapphire
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with single crystal high purity copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
  • Cartridge Weight: 8.8 g
  • Cartridge Body: birdseye maple wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with OFC copper
  • Output Voltage: 0.32 mV at 3.54 cm/sec.
  • Internal Impedance: 40 ohms
  • Frequency Response: 20 – 45,000 Hz ± 1 dB
  • Channel Balance: better than 1 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 7 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.1 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 30 hours

Platinum V2     $350       Sonata V2​    $600​

  • Type  High/Low output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage  2.8mV / 0.3mV (at 1KHz, 5cm/sec.)
  • Channel Separation  25 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 2dB)
  • Compliance  12 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2grams
  • DC resistance  150 ohms / 5 ohms
  • Recommended load
  • resistance  > 1,000 ohms / > 30 ohms
  • Cantilever  6mm length, hard aluminium pipe
  • Stylus  Micro Ridge Nude diamond
  • Weight  9.2 gram
Dynavector 10x5​
$650.
  • Type  High output moving coil cartridge with flux damper and softened magnetism
  • Output Voltage  2.5mV (at 1KHz, 5cm/sec.)
  • Channel Separation  25 dB (at 1KHz)
  • Channel balance  1.0 dB (at 1KHz)
  • Frequency response  20 – 20,000Hz (± 2dB)
  • Compliance  12 x 10-6 cm/dyn
  • Tracking force  1.8 – 2.2 grams
  • DC resistance  R=150 ohms
  • Recommended load
  • impedance  >1K ohms
  • Cantilever  6mm length aluminium pipe
  • Stylus  Elliptical
  • Weight  7.3 grams
Charisma Audio Reference One Two
$2,800.
  • Output Voltage: 0.38 mV at 3.54 cm/sec
  • Coil: Special iron crossed-coil with extremely high purity and ultra fine single crystal copper
  • Cantilever: Ruby
  • Stylus: Super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Internal Impedance: 12 ohms
  • Recommended Loading: 100 – 1,000 ohms
  • Dynamic Compliance: 15 um/mN
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Cartridge Body: Bocote Wood
  • Cartridge Weight: 7.1 g
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Charisma Audio Reference One
$2,200.
  • Cartridge Weight: 7.1 g
  • Cartridge Body: amboyna burl wood
  • Cantilever: ruby
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with ultra high purity single crystal copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Charisma Audio MC-2
$1,650.
  • Cartridge Weight: 12 g
  • Cantilever: sapphire
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with single crystal high purity copper
  • Output Voltage: 0.42 mV at 3.54 cm/sec.
  • Internal Impedance: 14 ohms
  • Frequency Response: 20 – 25,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Charisma Audio MC-1
$1,250.
  • Cartridge Weight: 12 g
  • Cantilever: titanium alloy
  • Stylus: super fine line contact nude diamond
  • Vertical Tracking Angle: 20 degrees
  • Coil: pure iron crossed-coil with 6N OCC copper
  • Output Voltage: 0.4 mV at 3.54 cm/sec.
  • Internal Impedance: 13 ohms
  • Frequency Response: 20 – 20,000 Hz ± 1 dB
  • Channel Balance: better than 0.5 dB
  • Channel Separation: better than 30 dB
  • Dynamic Compliance: 10 um/mN
  • Recommended Loading: 100 – 1,000 ohms
  • Recommended Tracking Force: 2.0 g ± 0.1 g
  • Tracking Ability at 315 Hz / 2 g: 80 uM
  • Recommended Tonearm Mass: medium
  • Break-in Period: 50 hours
Dynavector XV-1S Mono​
$5,950.
CD Players
Cayin CS-55CD
$1100.

CDT-17 Mk II     $3,000.00

CD 2000 Mk III         $10,180.00

CD 2500 Mk VI       $13,720.00

On the digital side, therefore, the most modern technology is available. On the other hand, the CS-55CD pampers with traditional tube technology on the output side: the 12AU7 tube is used in the analog output stage. Cayin relies on a large-sized ring core transformer to ensure that there are always enough current reserves. The front panel matching the design and dimensions of the Cayin CS-55A is available in silver or black. The scope of supply includes a system remote control unit, which can also be used to control the functions of the CS-55A full-voltage amplifier.

Rega Isis
$9995.
  • Discrete Class A operational amplifiers and filters
  • Optimised for sonic performance
  • Low noise, high drive capability and gain bandwidth
  • Careful design of the PCB’s
  • MP3 and WMA media capabilities
  • Audio grade electrolytic capacitors
  • Solid Polymer capacitors
  • Rega ‘K Power’ smoothing capacitors
  • Enhanced and optimised control code
  • Two Burr Brown PCM 1794 digital to analogue converters, running in parallel dual mono mode
  • High performance discrete Class A current to voltage amplifier
  • Wide dynamic range, low distortion
  • 10 separate power supply regulators are used in both the analogue and digital circuits
  • 50 VA transformer
  • The mechanism is graded and matched to the servo circuits
  • Rega custom designed and CNC machined aluminium case work
  • High quality anodised finish
  • Aesthetic black chrome facia and lid
  • CNC machined matching remote control
  • Dimensions W 434mm x D 350mm x H 112mm
  • Dimension needed to operate  W 434mm x D 350mm x H 200mm
  • Weight 19Kg
Rega Saturn-R​
$2995.
  • New Wolfson WM8742 DAC
  • Enhanced Output amplifier circuit
  • Enhanced Digital power supplies
  • Improved user interface
  • Redeveloped Analogue & Digital outputs
  • Solaris remote with CD, DAC and amplifier functionality
  • USB 192kHz – 24bits asynchronous
  • Dimensions: Width 432mm x Depth 325mm x Height 82mm
  • Dimensions needed to operate: Width 432mm x 350mm Depth x Height 180mm
Rega Apollo-R​
$1095.
  • New Wolfson WM8742 DAC
  • Enhanced Output amplifier circuit
  • Enhanced Digital power supplies
  • Improved user interface
  • Redeveloped Analogue & Digital outputs
  • CD remote with amplifier functionality
  • Dimensions W 220mm x D 320mm x H 90mm
  • Dimensions needed to operate  W 220mm x D 350mm x H 180mm.
Oracle CD 2500 Mk VI
$13720.

Oracle analogue and digital products have always been designed and built as “musical instruments” that can stand the test of time. It is our belief that achieving simplicity in design is a combination of knowledge and common sense. A properly designed device creates its own form; one that reflects the beauty of its function. True artistry combines these elements by means of the whole being greater than the sum of its parts.

Many of the problems that affect the accurate reproduction of recorded music derive from unwanted internal or external vibration. To address this issue the CD2000 MkIII and CD2500 MkIV use a massive aluminum floating chassis and a Delrin decoupling system of the cd drive. Furthermore, our unique suspension and disc clamping systems originally used in our analog turntables, have been adapted for use in our “State of the Art” CD Players.

The CD2500 MkIV harbors a new DAC board that uses the Burr Brown PCM1792 which allows input and output of digital data of up to 24bits/192khz. The CD player uses four independent and fully discrete analog modules, one for each of the analog signals from the PCM1792. These analog modules which have been further improved from previous versions are at the center of the music reproduction quality. The CD2500 MkIV can be used as your reference DAC for other digital sources since it features a SPDIF digital signal input. Both the CD2000 MkIII and CD2500 Mk IV have had their power supply stage totally redesigned. There is better realism, more dynamics and we are closer to a true analog-like sound than ever!

Oracle CD 2000 Mk III
$10180.

Oracle analogue and digital products have always been designed and built as “musical instruments” that can stand the test of time. It is our belief that achieving simplicity in design is a combination of knowledge and common sense. A properly designed device creates its own form; one that reflects the beauty of its function. True artistry combines these elements by means of the whole being greater than the sum of its parts.

Many of the problems that affect the accurate reproduction of recorded music derive from unwanted internal or external vibration. To address this issue the CD2000 MkIII and CD2500 MkIV use a massive aluminum floating chassis and a Delrin decoupling system of the cd drive. Furthermore, our unique suspension and disc clamping systems originally used in our analog turntables, have been adapted for use in our “State of the Art” CD Players.

The CD2500 MkIV harbors a new DAC board that uses the Burr Brown PCM1792 which allows input and output of digital data of up to 24bits/192khz. The CD player uses four independent and fully discrete analog modules, one for each of the analog signals from the PCM1792. These analog modules which have been further improved from previous versions are at the center of the music reproduction quality. The CD2500 MkIV can be used as your reference DAC for other digital sources since it features a SPDIF digital signal input. Both the CD2000 MkIII and CD2500 Mk IV have had their power supply stage totally redesigned. There is better realism, more dynamics and we are closer to a true analog-like sound than ever!

Music Hall C-DAC 15.3
$549.
  • 24bit/192kHz Burr-Brown PCM 1796 DAC
  • 3 input (optical, coax, usb-b) 24bit/192kHz Wolfson WM8805 DAC
  • brushed aluminum faceplate
  • mid-ship mounted vibration damped CD transport
  • high efficiency toroidal power transformer
  • gold plated stereo output
  • coax digital output
  • plays CD, CD-R/RW
  • removable power cord
  • special padded vibration damping feet
  • voltage switchable
  • system remote control
  • easy to view display
  • black finish
  • w17 x d14.3 x h3.1 in
  • 19 lbs. pkg.
Creek Evolution 100CD
$1995.
  • DIGITAL INPUTS 2 x SPDIF, 24 Bit 192 kHz, transformer isolated 2 x Toslink, 24 Bit 192 kHz, optically isolated 1 x USB, 24 Bit 192 kHz No additional software drivers are needed for OS X Windows PCs require additional drivers. 1 x Bluetooth input
  • CD TRANSPORT Custom designed, ICE quality, CD slot-loader, externally clocked for bit perfect performance
  • SNR > 110dBA unbalanced
  • DIGITAL OUTPUT 1 x SPDIF and 1 x Toslink optical output, pass-on all input signals
  • DIGITAL FILTERS Optional digital filters are selectable via the remote
  • ANALOGUE OUTPUT 2 x RCA un-balanced, 2.0V RMS. 2 x XLR balanced output, 4.0V RMS
  • HEADPHONE OUTPUT 1 x 6.35mm or ¼” Jack socket Output impedance
  • AUDIO BUFFERING Professional high-grade audio buffering
  • OUTPUT IMPEDANCE 47 Ohms
  • POWER SUPPLY 30 Watt toroidal mains transformer with 3 separate secondary voltage windings, with multi-cap power supply decoupling and multiple ultra-low noise discrete power supply voltage regulators.
  • RC BUS Input/output connection for external IR remote and serial link to Evolution 50A.
  • DAC TYPE 2 x Wolfson WM8742, 24 Bit 192 kHz, double differential.
  • INPUT RECEIVER WM8805, multichannel digital input receiver and clock generator.
  • OPERATING VOLTAGES 100 – 120V/ 200 – 240V, Switchable
  • POWER CONSUMPTION 20 Watts (at idle)
  • WEIGHT 5.5kg
  • DIMENSIONS W/H/D 430 x 60 x 280mm
  • FINISHES Silver or black engraved front panels
Creek Evolution 50CD
$1495.
  • DIGITAL INPUTS 2 x SPDIF, 24 Bit 192 kHz, transformer isolated 2 x Toslink, 24 Bit 192 kHz, optically isolated 1 x USB class 2 24 bit 192kHz
  • CD TRANSPORT Custom designed, professional quality, CD slot-loader, externally clocked for bit perfect performance
  • SNR > 110dBA unbalanced
  • DIGITAL OUTPUT 1 x SPDIF and 1 x Toslink optical output, pass-on all input signals
  • DIGITAL FILTERS Optional digital filters are selectable via the remote
  • ANALOGUE OUTPUT 2 x RCA un-balanced, 2.0V RMS. 2 x XLR balanced output, 4.0V RMS
  • AUDIO BUFFERING Op-amp audio buffering and filtering
  • OUTPUT IMPEDANCE 47 Ohms
  • POWER SUPPLY 25 Watt toroidal mains transformer with 3 separate secondary voltage windings, with multi-cap power supply decoupling and multiple ultra-low noise discrete power supply voltage regulators.
  • RC BUS Input/output connection for external IR remote and serial link to Evolution 50A.
  • DAC TYPE 2 x Wolfson WM8742, 24 Bit 192 kHz, double differential.
  • INPUT RECEIVER WM8805, multichannel digital input receiver.
  • OPERATING VOLTAGES 100 – 120V/ 200 – 240V, Switchable
  • POWER CONSUMPTION 20 Watts (at idle)
  • WEIGHT 5.5kg
  • DIMENSIONS W/H/D 430 x 60 x 280mm
  • FINISHES Silver or black engraved front panels
Cayin CDT-17 MkII
$3000.
  • Serious upgrade to the award winning CDT-17A​
  • High Definition USB audio design
  • USB2.0 interface accepts 24bit / 192KHz HD signals
  • Class leading high definition digital audio reception circuit
  • Vacuum tube rectification using TungSol 12DT5
  • 2 x Burr Brown PCM1792 dac chipset for fully balanced output
  • 4 x Amperex ECC88 for rca and xlr balanced output
  • Redesigned heavy duty disc reading mechanism
  • Pure red book cd digital servo system
  • Unique diamond shape buttons
  • New designed stylish and heavy duty aluminum chassis
Rega Isis Valve
$10995.
  • Laser Semiconductor
  • Wavelength 780nm
  • Digital sampling frequency 44.1kHz
  • Power Consumption 46w
  • Phono Unbalanced 2.4V source impedance 600 Ohms
  • XLR Balanced 2.4V source impedance 600 Ohms
  • Co-Axial SPDIF 0.5V source impedance 75 Ohms
  • Toslink compatible output
  • USB 16bit 44.1/48kHzTHD+Noise< 0.06%
  • Frequency Response 30Hz – 20kHz +/-0.5dB
  • Rega custom designed and CNC machined aluminium case work
  • High quality anodised finish
  • Aesthetic high gloss black facia and lid
  • CNC machined matching remote control
  • Dimensions  W 434mm x D 350mm x H 112mm
  • Dimension needed to operate  W 434mm x D 350mm x H 200mm
  • Weight 19.5Kgs
D/A Converters
Music Hall DAC 15.2
$299.
  • 3 digital inputs (usb, optical, coaxial)
  • 1 digital output (coaxial) – converts usb and optical digital input signals to coaxial digital output
  • 1 pair (rca) analog outputs
  • superior Texas Instruments (Burr-Brown) PCM 1796 24bit/192kHz processor
  • 24bit/96kHz digital processing via usb input
  • 24bit/192kHz digital processing via optical and coaxial inputs
  • easily connects to PC and Apple computers
  • output level: 2.1mV
  • 0.0012% total harmonic distortion
  • signal to noise ratio: >110dB
  • frequency range: DC – 20kHz +/- 0.5dB
  • ultra-quiet external power supply
  • rigid noise rejecting extruded aluminum chassis
Music Hall DAC 25.3​
$595.
  • ​usb input accepts 24bit/96kHz signal
  • electro-harmonix 6922 tube single-ended (rca) output
  • solid-state differential balanced output
  • ti PCM 1796 24bit/192kHz DAC
  • ti SRC 4192 asynchronous sample rate converter
  • high precision active crystal oscillator master clock
  • user selectable 96kHz or 192kHz upsampling
  • asynchronous reclocking and anti jitter control system
  • 8 x oversampling digital filter
  • 4 digital inputs: coax (s/pdif), optical, XLR (AES/EBU), or USB
  • 2 gold plated outputs; single ended (RCA), balanced (XLR)
  • headphone output with adjustable analog volume control
  • large high current oversize r-core power transformer
  • thick brushed aluminum fascia and solid chassis
Rega DAC-R
$1195.
  • DAC 2x Wolfson WM8742
  • Frequency Response (100KΩ load) Filter 1 selected
  • Low data rate 44.1/48kHz = 10Hz -0.05dB to (44.1K) 20.02kHz (48K) 21.7kHz -0.03dB
  • Medium data rate 88.2/96kHz = 10Hz -0.05dB to (88.1K) 28.7kHz (96K) 31.2kHz -3dB
  • High data rate 176.4/192kHz = 10Hz -0.05dB to (176.4K) 44.1kHz (192K) 47.7kHz -3dB
  • Maximum output level = 2.175V into 100KΩ load
  • Bit resolution (all inputs) 16 to 24bit
  • Supported data rates = 32, 44.1, 48, 88.2, 96, 176.4, 192kHz
  • Total Harmonic Distortion all inputs (24bit 96kHz) = 0.006% @ 1kHz
  • Signal to Noise Ratio -105dB (relative to maximum output level with a 100Hz to 22kHz bandwidth)
  • Digital inputs
  • USB Asynchronous Isolated (24bit 44.1/48/88.2/96/176.4/192kHz)
  • Input 1 Optical/Toslink (24bit 32/44.1/48/88.2/96/176.4/192kHz)
  • Input 2 Optical /Toslink (24bit 32/44.1/48/88.2/96/176.4/192kHz)
  • Input 3 Isolated 75Ω Co-axial (24bit 32/44.1/48/88.2/96/176.4/192kHz)
  • Input 4 Isolated 75Ω Co-axial (24bit32/44.1/48/88.2/96/176.4/192kHz)​
  • Digital SPDIF outputs (via receiver & PLL)
  • Optical/Toslink
  • Isolated 75Ω Co-axial
Headphone Amplifiers
Creek OBH-21 mk2
$595.

The OBH-21mk2 is essentially a very high quality miniature integrated amplifier, designed specifically to drive two pairs of low impedance headphones simultaneously from a line level source, such as a CD player, DAC, or amplifier without headphone output. It can even drive demanding 8 Ohm headphone if called upon to do so.  Unusually, it is also designed to act as a single input high quality pre-amplifier, if required.  Its output level is controlled by an ‘audiophile quality’ ALPS 27mm Blue Velvet volume control on the front panel and by user adjustable gain setting switches on the bottom of the case.

The OBH-21mk2 has three pairs of stereo RCA sockets on the rear panel for Line level input, looped Line level output, and a variable pre-amp output, whose gain can be set, independently from the headphone gain for the greatest flexibility.

Music Hall ​PH 25.2
$399.

Marrying a gorgeous sounding tube pre-amp with solid-state amplification has been a technique for achieving unequaled sound quality in high-end component audio since the advent of the transistor.

Music Hall HA 11.1
$275.

The music hall ha11.1 is a high quality low noise stand-alone headphone amplifier intended for use with the majority of headphones available. It is for those who desire the best in sound and performance at an affordable price.

Lehmann Linear SE USB
$2,499.

The Linear SE satisfies every wish of even the most demanding music lovers. With exquisite components and elegant housing variations it closes up to our award-winning Linear and sets new standards for your music experience. Allow yourself to be convinced of its outstanding sound quality and impressive design – because great sound never looked better!

​ Imagine closing your eyes and getting carried away by the sound of your musical treasures: the individual timbres will blend into a fascinating artistic synthesis, causing the music to sound precisely as it was recorded. Our representative headphone amplifier can bring you this unique adventure. It lets you experience the music with all your senses time and again. Everybody will envy you this gem.

Lehmann Linear SE
$2,199.

The Linear SE satisfies every wish of even the most demanding music lovers. With exquisite components and elegant housing variations it closes up to our award-winning Linear and sets new standards for your music experience. Allow yourself to be convinced of its outstanding sound quality and impressive design – because great sound never looked better!

​ Imagine closing your eyes and getting carried away by the sound of your musical treasures: the individual timbres will blend into a fascinating artistic synthesis, causing the music to sound precisely as it was recorded. Our representative headphone amplifier can bring you this unique adventure. It lets you experience the music with all your senses time and again. Everybody will envy you this gem.

Lehmann Linear
$1,119.

Already since 2004 the Linear has made all common headphones to shine at their very best. Extremely demanding users rely on our top model, from the West German Broadcasting Corporation to the audiophile TACET label to Sennheiser’s and AKG’s headphone experts. It’s not without reason that the Linear belongs to the reference class in its genre.

When you put on your headphones and load your favorite CD, the Linear will give rise to wonderful worlds before your mind’s eye. Physical, punchy lows and a delicate resolution reveal your favourite tracks in all their glory over the entire frequency bandwidth. Carefully selected components and an extremely sophisticated circuit design establish the foundation of our number on.

Lehmann Traveller
$599.

The Traveller sets a new standard in the league of mobile headphone amplifiers. We have designed it for a generation who is constantly on the move: no matter if at home, in the office or when travelling – this elegant companion will always give you a unique sound experience, everywhere. And the Traveller lives up to even the highest aesthetic demands.

On the go around the clock and at home wherever the pulse of life can be felt – this is you. With the pristine sound of your music in your ears the world is at your feet, and you breathe in life to the fullest. For this purpose our Traveller is just the right choice: despite its compact size, it will always elate you with excellent sound quality on all your short and long voyages. Moreover, it does not only sound phenomenal, but even cuts a fine figure

Lehmann Rhinelander
$529.

Despite all the down-to-earthness of an entry-level model – this ambitious headphone amplifier will open up a whole new world of musical enjoyment to you. The Rhinelander stands fully in the high-end tradition of the Lehmannaudio products. With its superior set of features it shows a marked contrast to other devices in its price class.

Lehmann Studio Cube​
$499.

Our StudioCube is the ideal partner for the personal monitoring: it enables a nuanced, transparent and fatigueless listening in the studio and on stage. At the same time this compact headphone amplifier fascinates the most demanding musicians and master sound engineers with its outstanding sound qualities.

Being a musician or a sound nerd, it’s your natural ambition to always deliver optimum results on stage and in the studio. For a pro-level headphone amplifier this ambition poses a special challenge. Our StudioCube copes with any task brilliantly and is your true and flexible companion in every situation. An all-out professional whose uncompromisingly truthful sound you can always depend on.

Rega EAR
$395.

Developed by our engineers, the new Ear benefits from a completely new surface mount PCB layout based on the hugely successful Brio-R amplifier. Exceptional performance is guaranteed with the convenience of independent mute, volume control and multiple connectivity options to integrate perfectly into any users system.

Integrated Amplifiers
Rogue Cronus Magnum II
$2,495.

The award winning Cronus Magnum has garnered an enviable reputation in the high end audio world. Even at its attainable price, it outperforms other integrated amps costing many times more. The pure tube design provides a smooth, almost liquid sound that has made this amp a reviewer favorite. With circuitry borrowed from our most advanced amplifier designs, the Cronus Magnum’s 100WPC effortlessly reproduces even the most demanding musical passages. Featuring a headphone amplifier and MM phono preamplifier the Cronus Magnum provides a complete solution to your amplifier needs.

From a technical standpoint the Cronus uses a triode preamplifier coupled to our excellent Atlas Magnum power amplfier. A large oversized linear power supply stores tremendous energy for low frequency response and dynamic headroom. The tube circuitry is cutting edge with short signal paths exacted in a low noise design. Finally, precision components are used to provide the transparency and air that are so critical to accurate musical reproduction.

Rogue Sphinx v2
$1,395.

Dynamic, transparent, and profoundly musical, the Rogue Sphinx sets a new standard in affordable integrated amplifiers. Utilizing sophisticated circuitry borrowed from our most advanced designs, the Sphinx is able to outperform separates costing far more than this single box design. And with 100 watts of hybrid power, this integrated is capable of realistic volume levels that will rival the clarity and presence of the original performance.

The Sphinx contains a discrete headphone amplifier and an excellent phono section compatable with high output MM and MC cartridges. Active and fixed outputs allow for the addition of a subwoofer or other outboard devices. A high capacity linear power supply provides tremendous energy storage to recreate the deepest bass passages while various regulated power supply stages provide ultra smooth sound in the midrange and treble. The machined aluminum faceplate is available in either black or silver to compliment the rest of your components and the optional remote further adds the convenience of remote volume operation.

Rega ​Osiris
$9,995.

The Osiris is the culmination of 32 years’ experience in solid-state amplifier development. A no compromise, super high performance, 162 Watts into 8 Ohms (250 Watt 4 Ohms), dual mono amplifier housed in a custom Rega CNC machined aluminium case. Designed around “minimalist” high gain power amplifier and “passive pre-amplifier” circuit topology, a passive volume control and a single stage of power amplification between the input and the speakers, the Osiris offers unrivalled performance and build quality.

All these features combine to create the supreme level of performance found in the Osiris and provide a perfect partner for our Isis CD player. We hope that you enjoy this product as much as we have enjoyed creating it.

Rega Elex-R
$2,995.

The Elicit-R has been designed and engineered to the highest standard. The Elicit-R will deliver the best possible audio performance whilst remaining simple to use and easy to setup. Our recent development work in amplifier design circuitry has allowed us to further advance the Elicit-R performance by using new and improved power amplifier circuits (based around the hugely successful Rega Brio-R amplifier).

Combined with FET discrete line level pre-amplifiers and a programmable stepped attenuator volume control, ensuring greater levels of performance and control over the delivery of power. The Elicit-R is supplied with the new Solaris system remote handset offering full control over this and all of the current ‘R’ range of electronics.

Rega Brio 2017​
$995.

The Brio has a completely new case to house its improved circuits and parts. It now sits in a fully aluminium two-part case which boosts the Brio’s heat sinking capabilities and improves on Rega’s already solid build quality and reliability. The new Brio has a cleverly integrated headphone socket specially designed to avoid interference with the audio circuit when not in use and as you would expect, a very high specification moving magnet phono stage is built in as standard.

Throughout the design process the Brio has been meticulously improved in every aspect, from the quality of materials to the manufacturing process, to make this new Brio a step ahead in Rega’s engineering and design for amplifiers.

Music Hall A 30.3
$999.
  • 125 watt/ch stereo amp
  • ultra quiet preamp section with gold plated inputs
  • high qrade no-short speaker binding posts for A & B speakers
  • direct AV (home theater bypass) input
  • CD, Tuner, Aux, iPod input, XLR, and MM phono input
  • gorgeous slim line system remote control
  • low distortion, highly accurate TI PGA 2311 digitally controlled analog volume control
  • special vibration damping feet
  • dual-mono design
  • preamp output
  • headphone output
  • detachable AC cable
  • 2 x massive Toroidal power transformer (one for each channel)
  • thick brushed aluminum fascia
  • easily readable and dimmable vacuum florescent display
  • solid chassis
  • voltage switchable
Music Hall A 15.3​
$549
  • high-current 50 watt/ch amplifier
  • ultra low noise pre-amplifier section
  • brushed aluminum face plate
  • gold plated heavy gauge speaker binding posts
  • 5 x analog stereo gold plated inputs
  • 1 x pre-amp out
  • moving-magnet phono input
  • 1 x 3.5mm headphone output
  • 1 x 3.5mm front panel line input
  • special padded vibration damping feet
  • powerful high-current toroidal power transformer
  • solid chassis
  • voltage switchable
  • removable power cord
  • system remote control
  • black fascia + case
Creek Evolution EVO 100A
$2,195.

To maintain a family resemblance with the lower powered amplifier, the EVOLUTION 100A is housed in a similar slim case with engraved front panel and solid metal control knobs as the EVOLUTION 50A. It is available with either a Black or Silver brushed aluminium front panel and uses the same ingenious soft push button design as the EVOLUTION 50 series, offering excellent tactile feel and backlit optical indication of functions, for optimum user-friendliness.

​ The front panel features a large OLED (Organic Light Emitting Diode) display. The white on black display provides higher clarity and resolution than a normal display and has a wide range of customised graphic symbols. Display brightness levels can be changed or turned-off, if not required, via the menu system.

In addition to greatly increased performance, thanks to ingenious new circuit design, the EVOLUTION 100A has been equipped with 2 sets of high quality loudspeaker binding posts, with local and remote switching for A & B outputs. Optional extras include the ability to plug the Sequel mk2 Phono pre-amp inside and add theAMBIT FM/AM radio or RUBY DAC/Bluetooth/FM radio module to the expansion slot on the rear panel.

Creek Evolution EVO 50A V2​
$1,195.

This new amplifier forms part of the next generation EVOLUTION 50 range of products. Housed in a slim case with engraved front panel and solid
control knobs, it’s finished in either black or silver brushed aluminium. An ingenious new push button design has been developed for it, offering excellent tactile feel and backlit optical indication of usable functions for optimum user-friendliness.

The 50 series is the first Creek product to feature an OLED (Organic Light Emitting Diode) display. This white on black display provides higher clarity and resolution than a normal display and offers a wide range of customised graphic symbols. Display brightness levels can be changed or turn off when not required via the menu system.

Creek’s Senior Engineer – David Gamble – who has much experience in the audio industry developed a completely new bi-polar transistor power amplifier circuit especially for the EVOLUTION 50A with very high open-loop gain and low distortion. Featuring a pair of Sanken 15 Amp power transistors, with built-in thermal compensation for rapid bias tracking performance, the Power Amplifier circuit has very low output impedance and can produce high output current. This combination will provide exceptional speed and control with most loudspeakers.

Cayin A-88T
$3,500.

The A-88T is another incredible hand-crafted tube amplifier by Cayin with remarkable capabilities. The MK3 version further improves upon its predecessor’s rich, full sound quality.

Four EL34 or KT88 tube components are used for Class AB1 push-pull amplification, while the input stage utilizes 6SL7 and 6SN7 pieces for voltage regulation. The unit features point-to-point wiring, a high-quality Japanese ALPS motor potentiometer, and a silver-plated signal cable. Two EI output transformers with wide bandwidth and one specially-designed toroid power transformer set the A-88T MK3 apart from its peers. A soft start function (about 30 seconds) and other measures have been put into place for better protection of the power transformer and output transformers. Like its A-50T counterpart, the A-88T includes a removable cage and full-function remote control.

Cayin CS-55A
$2,500.

The CS-55A is the most recent advancement in tube amplifier technology created by Cayin. This state-of-the-art machine boasts forty watts per channel by using 4 KT88 tubes in Class AB ultra-linear push pull amplification. The CS-55A consists of four pairs of input: one Phono, a USB port, and two line inputs giving a wide range of options for any listener.

The CS-55A comprises of a fully anodized aluminum front, a vented chassis with a gorgeous finish, the finest hand-made point-to-point wiring, and a soft-start circuit to enhance the life of the toroidal power transformer and output transformers. Combined with audio grade capacitors, carbon film resistors, and ceramic tube sockets, this is one amplifier every audiophile should have in his/her collection. Speaker output impedance can be swapped between 4 ohms and 8 ohms. Similarly to the A-88T, the CS-55A comes with a handy remote control.

Cayin A-50TP-Phono
$1,800.

The Cayin A-50T immediately attracts listeners with its rare, natural, and fluid sound. These qualities, paired with immaculate processing, make the new Cayin amplifier without competition in its price range.

The A-50T contains four EL34s and produces Class AB1 amplification. This unit’s superb craftsmanship features point-to-point wiring, top-of-the-line EI audio transformers, and a specially developed toroidal core net transformer. Two 12AX7EHs and two 12AU7s are used in the preamplifier. The signal processing is exclusively made through tubes, with a simple switch to fine tune output taps for 4 or 8 ohms. A removable cage snaps in and out of position to either protect the tubes or showcase high-quality components. A remote control for all functions, including triode and ultralinear circuit options, perfects the carefully laced accessories package.

Cayin A-50TP
$1,500.

The Cayin A-50T immediately attracts listeners with its rare, natural, and fluid sound. These qualities, paired with immaculate processing, make the new Cayin amplifier without competition in its price range.

The A-50T contains four EL34s and produces Class AB1 amplification. This unit’s superb craftsmanship features point-to-point wiring, top-of-the-line EI audio transformers, and a specially developed toroidal core net transformer. Two 12AX7EHs and two 12AU7s are used in the preamplifier. The signal processing is exclusively made through tubes, with a simple switch to fine tune output taps for 4 or 8 ohms. A removable cage snaps in and out of position to either protect the tubes or showcase high-quality components. A remote control for all functions, including triode and ultralinear circuit options, perfects the carefully laced accessories package.

Rogue ​Pharaoh​
$3,495.

When we began development of the Pharaoh amplifier we had one overarching goal: The realization of an integrated amplifier that, without compromise, would offer the performance of the finest separates. To that end, the Pharaoh uniquely combines solid state power amplification with tube preamplification to deliver amazing dynamics as well as the organic midrange and sweet top end that only a tube amp can provide. Along with truly outstanding sonics the Pharaoh boasts numerous features including a tube headphone circuit, mm/mc user adjustable phono, home theater bypass, remote controlled volume with mute, and a processor loop. The Pharaoh is truly a “one box” solution to all of your amplifier needs.

From a technical standpoint, the all important preamplifier section utilizes a pair of long plate 12AU7 tubes configured in a mu-follower topology. Large coupling caps and a host of exotic parts ensure that the audio signal is preserved perfectly during this critical stage of amplification. A huge linear power supply is then used to deliver energy to the solid state power amplifier section. Designed around the highly regarded Hypex OEM modules, the amplifiers provide  seemingly unlimited power and dynamics.

Loudspeakers
Rega RX-5
$2995.

The Rega RX-FIVE loudspeaker system delivers  balance, detail and dynamics thanks to a unique handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR7.8 bass unit. These custom units are mounted in a newly designed cabinet enclosure constructed from 18mm MDF and covered in a choice of three beautiful real wood veneers.The RX-FIVE will integrate perfectly into any home and deliver exceptional performance and musicality with a smooth and accurate bass response.

ProAc Response DB1
$3200.

Small mini monitor type loudspeakers have become very popular for those wishing for a high quality sound with a minimal visual effect.

Although the mini monitor type speaker can be quite accurate and indeed sound better than many bigger loudspeakers, which obviously have not been made with the same care, the Achilles heel of a small loudspeaker is the bass extension and sound stage size.  A big loudspeaker can produce low octaves and give you a large sound stage ideal for large orchestral and high level rock; however they can be an eyesore and dominate the room visually.  ProAc have set out to try and achieve in a small speaker a sound normally associated with a larger speaker particularly the bass response.

ProAc Tablette Anniversary
$2400.

The original ProAc Tablette was launched 30 years ago to instant critical acclaim and redefined performance in mini-monitor class loudspeakers at that time. There have been nine incarnations of the Tablette to date and each one has seen improvements in bass extension, midrange transparency and imaging. Reproducing a large soundstage is a difficult task for a small loudspeaker, because of lack of bass power due to the limitations of the cabinet size. After a year’s intense R&D however, ProAc are confident in having significantly improved this area of performance with only marginal increments to the cabinet’s dimensions.

With the new ProAc Tablette Anniversary speakers extra bass power and soundstage size comes from a new 5 inch mid-bass driver which utilizes a Kevlar cone designed by ProAc. This drive unit gives uncanny bass extension, and is loaded by one large, rear port. A new ProAc developed 19mm dome tweeter features a special material on the front plate to dissipate phase anomalies and cancellations. The drivers are seamlessly integrated via a high quality crossover network. As well as improved efficiency and power handling, the ProAc Tablette Anniversary produces a significantly larger soundstage. Shut your eyes and the classic Tablette, trademark ability to produce a large soundstage from such a small enclosure, is now taken to a much higher level

ProAc Tablette 10
$1900.

The new ProAc Tablette 10 is a tenth generation of the Tablettes launched in 1979.  The Tablette 10 is an all new design, using a thin walled heavy damped infinite baffle enclosure which is the same as the BBC LS3/5a.  This design allows the Tablette 10 to be positioned against the wall, unlike a ported enclosure (not recommended).

The new Tablette 10 has cutting edge new drive units, the bass driver has a Paginna Mika cone which is reed leaves mixed with Mika and coated with an acoustic dope.

The crossover has been specially designed for a sealed enclosure with a network which shapes the response to give a rich bass and an extremely transparent midrange.  The tweeter is our well known 1 inch silk dome used in many of ProAc’s other models.

Epos K3
$2395.

The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 ½ way K3 floor-standing loudspeaker is the largest model within this range of loudspeakers.

The initial concept started out with a thought about how to take conventional cabinet loudspeakers into a new area of the market. This spawned the idea of how to make a loudspeaker the hub, or central place, for your Hi-Fi system. This concept had to be achieved whilst preserving Epos’ high-end roots.

The K-Series has a number of unique design features that enables it to achieve its design goal. These features include: stylish looks, High Velocity Slot Ports (HVSP), rear mounted drivers, detachable rear baffles and upgradability to fully powered active mode. The K-Series is much more than just another box loudspeaker, it is ‘probably’ the future!​

Epos K2
$1750.

The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 ½ way K2 floor-standing loudspeaker is the second largest model within this range of loudspeakers.

The initial concept started out with a thought about how to take conventional cabinet loudspeakers into a new area of the market. This spawned the idea of how to make a loudspeaker the hub, or central place, for your Hi-Fi system. This concept had to be achieved whilst preserving Epos’ high-end roots.

The K-Series has a number of unique design features that enables it to achieve its design goal. These features include: stylish looks, High Velocity Slot Ports (HVSP), rear mounted drivers, detachable rear baffles and upgradability to fully powered active mode. The K-Series is much more than just another box loudspeaker, it is ‘probably’ the future!.

Epos K1
$795.

The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 way K1 stand-mount loudspeaker is the largest stand-mount model within this range of loudspeakers.

The initial concept started out with a thought about how to take conventional cabinet loudspeakers into a new area of the market. This spawned the idea of how to make a loudspeaker the hub, or central place, for your Hi-Fi system. This concept had to be achieved whilst preserving Epos’ high-end roots.

The K-Series has a number of unique design features that enables it to achieve its design goal. These features include: stylish looks, High Velocity Slot Ports (HVSP), rear mounted drivers, detachable rear baffles and upgradability to fully powered active mode. The K-Series is much more than just another box loudspeaker, it is ‘probably’ the future!

Epos K5
$495.

The K-Series marks the beginning of a new era for Epos. The 2-way K5  stand-mount loudspeaker is the entry-level model within this range of loudspeakers. The K5 surpasses expectations in its ability to deliver a wide soundstage and detailed bass from such a small unit. This little speaker also makes a wonderful AV satellite speaker or desktop companion.

Dynaudio Evidence Temptation
$30000.

At the heart of the timeless elegance of the Temptation lies the Evidence technology concept, housed in an alluring slim cabinet. It makes it possible to achieve sonic perfection while offering optimal integration into any living room.

Similar to the uncompromising modular construction of the Evidence Master, the bass, mid, and treble drive units as well as the crossover are mechanically isolated from each other in order to perfect every minute detail to realize the highest sonic performance level possible.

As the Evidence Temptation is more compact in its overall dimensions, its cabinet does not necessitate three individual sections.

Two MSP cone mid range drivers and two soft-dome tweeters are integrated in the middle section which itself is manufactured from solid, CNC-machined aluminum. This material’s attributes together with its specifically rounded sides ensures uniform and uncolored sound dispersion.

The completely transparent and relaxed reproduction of the highest frequencies provides an accurate sonic experience. The tweeters’ fine soft domes are each protected by an acoustically neutral slim titanium bar

ProAc Response D2
$3400.

For many years the Response 1SC has been one of the world’s leading mini monitors but now the D1 has stolen its crown. High tech improvements have been made to the cabinet, bass driver, and crossover network.

The cabinet baffle is slimmer to aid dispersion, and now has a special damping material making the cabinet very heavy and inert.

The all-new bass driver is now on a ProAc chassis, this has a raised spider and similar cone material to the D2. It also features the EXCEL magnet system and a new acrylic damping phase plug.
Further improvements have been made to the crossover network. The results are a punchier bass, richer more open midrange, with sweet and detailed high frequencies. The D1 is also 1.5 dB more efficient than the 1SC making it easier to drive for those who have amplifiers with a lower output.

ProAc Response D20R
$4900.

The Response D18 has proven to be one of ProAc’s most successful loudspeakers receiving critical worldwide acclaim. However, the D18 is only available with a dome tweeter, so to satisfy demand for people wanting a ribbon tweeter ProAc has redesigned the D18 using an upgraded cabinet with new bass loading, new crossover network and the ProAc ribbon tweeter used in other ProAc models.

This new exciting model is called the D20R and with the upgrades the sound quality has improved in all areas. Improvements comprise of a new cabinet with bass loading used in D30 and D40 models. A new crossover network and a ProAc ribbon tweeter as used in D30 D40 K6. The result is a wonderful open and expansive midrange with a substantial bass, ProAc ribbon tweeter giving sweet and detailed high frequencies, a large sound stage is also a bonus.​

Rega RX-3
$1995.

The Rega RX-THREE loudspeaker system delivers balance, detail and dynamics thanks to a unique  handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR125.8 bass unit. These custom units are mounted in a newly designed cabinet enclosure constructed from 18mm MDF and covered in a choice of three, beautiful, real wood veneers. The RX-THREE will  integrate perfectly into any home and deliver exceptional performance and musicality with a smooth and accurate bass response.

Rega RX-1
$1295.

The Rega RX-ONE loudspeaker system delivers balance, detail and dynamics thanks to a unique handmade set of Rega designed drivers and crossovers.The newly developed DX-125 bass mid-range driver (using a doped  paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency unit. Both mounted in a larger cabinet constructed from 18mm MDF and covered in a choice of beautiful real wood veneers, the RX-ONE will integrate perfectly into any home delivering exceptional performance within a wide range of systems.

ProAc Studio 148
$3600.

ProAc’s latest the studio 148 is a narrow columnar design with a stabilising plinth and bass port pre-drilled for adjustable spikes. The beautiful and real wood veneers are impeccable making it suitable for all types of room design. There are 3 drive units in each enclosure, the two 6.5 inch units cover bass frequencies but each one has been mechanically tuned to cover mid frequencies.

To improve dispersion the upper bass driver has a phase plug whilst the lower unit has a ProAc open weave cap. This gives the 148 tremendous bass power and depth with a clear precise mid range. The bass drivers crossover to the ProAc 1 inch silk dome tweeter used in many other ProAc models.

The bass drivers are loaded by a port in the bottom of the cabinet and through the plinth. Spikes are used to raise the cabinet allowing air to move under the enclosure and through the port. Improvements can be heard in all areas from a tight, cleaner and extended bass through a detailed mid-range with a sweet and detailed high frequency, the 148 also has a large spectacular sound stage with pin point imagery.

The studio 148 comes in a variety of real wood veneers and is above average for efficiency, meaning the use of small high quality valve amplifiers and transistor amplifiers.

ProAc Studio 118​
$2200.

The new studio 118 is a new stand mounting design. It comes in a variety of real wood veneers and the sound quality belies the size of the enclosure.

The 118 has a new bass driver, with a great deal of research into cone materials, the new 118 unit excels in bass and mid-range performance and is further helped by a phase plug. The bass driver is loaded through a port making a reflex design, it also has a new magnet assembly giving a better bass response with a more open and better dispersion on mid-range frequencies.

The tweeter has our iconic ProAc 20mm tweeter to cover high frequencies which it does in a sweet and detailed manner. A new crossover has been design to match the two units to give a wonderfully large sound stage with pinpoint imagery. The 118 is excellent on all types of music and more efficient than previous models, which make it suitable for lower powered valve and transistor amplifiers.​

ProAc K8
$39500.

The ProAc K6 is one of our most successful designs and the plans to make a larger K8 have finally come to fruition.

The K8 uses a larger 8 inch bass driver than the K6, the cone is made from Kevlar weave material, then polished and concentrically weighted.

With a new wider cabinet, the midrange horn could now be redesigned. Stewart Tyler decided to make a very shallow midrange horn from billet aluminium. The midrange horn being very shallow gives excellent dispersion this widens the sound stage and reveals details right down to the finest brushed cymbal.

The ProAc ribbon tweeter is also used as it is in most of ProAc’s high end speakers. The tweeters are wonderfully natural and fine detail is produced even at high levels with comfort.

The 8 inch Kevlar bass drivers are made in house these bass drivers are ported through a curved tude in the base of the loudspeaker.

On extensive listening tests it was noticed that the K8 had a wonderfully wide sound stage and image, mainly down to our new shallow horn. Also new was the crossover and a new board was designed with heavy tracking and only audio file components along with studio quality inductors.

The K8 is designed for those wishing to have a speaker from the top of the tree in terms of sound and build quality, this new design has produced a very large sound stage and along with clean and extended bass response and finished with our ribbon tweeter, I’m sure you will agree that their sounds are perfectly natural.

ProAc K6
$22000.

ProAc is proud to announce the launch of the K6 loudspeaker.

Following the successful incorporation of carbon fibre cone technology in the Carbon Pro Series, ProAc have been researching other materials for possible inclusion in their high end loudspeakers. The results of this research have come to fruition in the shape of the new K series which utilises cones manufactured from the material, Kevlar. Kevlar benefits from having similar properties to carbon fibre, being light and at the same time rigid. The ProAc 6 1/2″ drivers utilised in the K6 feature Kevlar cones made by the same special method as our carbon fibre coned drive units; the cone is painstakingly produced from a mould by hand, a labour intensive process taking many hours to complete.

Although Kevlar has proven to be an excellent cone material sonically, the Kevlar ProAc bass drivers require a different porting mechanism in order to realise their full potential. The bass is loaded by an almost invisible vent to produce a wonderfully weighty but exceptionally fast bass response. These drivers are seamlessly crossed over to a 2″ dome midrange, the horn of which is manufactured from billet aluminium and for the high frequencies, ProAc’s proven ribbon tweeter has been chosen. The cabinet on the K6 is a traditional mixture from ProAc of HDF materials of different thicknesses heavily damped with bitumen. Indeed the carcass including bitumen is 35mm thick. The combination of research into carbon fibre and its ingredients have produced a stunningly accurate and detailed loudspeaker, having an electrostatic or panel quality without the drawbacks. Sound is reproduced effortlessly with incredible detail and pinpoint imagery, which often can be muddled by conventional drive units.

The K6 is designed for audiophiles and music lovers who are looking for a true high end loudspeaker offering smooth reproduction and an impressively flat response throughout the frequency range. The legendary ProAc qualities of large soundstaging and pin-sharp imaging capabilities complete a highly musical and engaging transducer.

ProAc Response D48R
$10900.

After a year in research and development the D48 is now ready for production.

Areas of improvement have been mid-range detail and a cleaner, faster and more extended bass response. A new studio monitor quality bass driver was designed for the D48. It features a special impregnated cone and mid frequencies are tuned by a cap of greater size than standard. This gives the new unit greater mid-range detail along with excellent bass control giving a tighter and more extended response. The two new bass drivers are each loaded through our special floor loading with side vents, this makes the loudspeaker easier to sight and reacts less to surroundings. The two bass units are then seamlessly mated to our ribbon or dome tweeter depending on your preference. With such a large slim floor standing design the sound stage is superb being very large and with pinpoint imagery. Another achievement for the D48 is its ability to create large orchestral works as well as heavy rock music.

The D48 has a high quality filter network designed by Stewart Tyler comprising of the finest components, ProAc cable on a special board. The filter is also split for bi-amping and bi-wiring. This is one of the best designs from ProAc and should please all audio files regardless of their taste in music.

ProAc Response D30RS
$7800.

​ProAc have updated the D30 to a D30S.  Still available in a dome or ribbon tweeter – Response D30DS and D30RS respectively

ProAc have developed a new bass driver using a cone similar to that used in our Response D48, the cone is made from pulp and Mika and is coated with an acoustic dope it also now has a phase plug to improve detail at the crossover point, which will give a more natural sound.

The Response D30S’ now offer a beautifully flat response.  The new bass driver and crossover will give better mid-range detail and a wider sound stage.

The D30S offers an exceptional accurate portrayal of the music with powerful bass response and excellent midrange detail with low colouration.  They also offer a resistive load and are easy to drive.  We use a crossover with the finest quality components split for bi-wiring and bi-amping through our beautiful nickel silver terminals.

Dynaudio Evidence Platinum
$49200.

Before we start, we just want to say this: Evidence isn’t a ‘luxury’ speaker. It doesn’t have gold-plated screws or endangered wood inlays, and it doesn’t make boastful (and meaningless) claims about the ethereal nature of sound.

It’s simply the best way to hear your music.

Evidence Platinum encompasses all the values and ambitions we had when we started Dynaudio in 1977 – to reproduce music without colouration, effects or distortion, so you can hear it unvarnished: the way it was meant to be heard.

Each speaker is handcrafted to near-impossible standards in our factory in Denmark – overseen by experts in furniture polishing, acoustics, materials science (the people who handle the proprietary Magnesium Silicate Polymer material we use for our drivers and the precision-coating we put on our soft-dome tweeters), woodworking, CNC machining and more. And it doesn’t leave us until it’s perfect.

Dynaudio Evidence Master​
$69000.

The Evidence Master is comprised of three individual interlocking sections. The technically identical upper and lower cabinet sections house the bass drive units, while the middle section contains the midrange and treble drive units as well as the crossover, the latter being further isolated within its own individual sub-compartment. This construction offers a tremendous performance advantage, as each section can be optimized for the differing requirements of precise bass, midrange and high frequency reproduction.

The middle section features a massive CNC-machined solid aluminum baffle which houses two special Dynaudio MSP (Magnesium Silicate Polymer) cone midrange drivers and two perfectly matched and meticulously selected Dynaudio coated soft-dome tweeters.

The elegant design of the aluminum baffle is a direct result of geometric optimization for absolutely perfect sound dispersion. The mechanical properties of aluminum, in conjunction with the mass of the middle section guarantee perfect resonance control – reproduction of high frequencies remains completely uncolored so even the finest musical details are precisely resolved.

Dali Zensor 7
$1195.

Standing 97.8 cm, the flagship model of the series is both noticeable and contemporarily becoming in its high-gloss lacquered finish. If you really need the full blown sonic experience in a mid to large sized room at an affordable level, this is where to go!

Being the Magnum Opus of the series, only ZENSOR 7 is equipped with 2×7” woofers. The larger cone area on all ZENSOR’s compared to market standards ensures a highly effortless and authentic reproduction of musical dynamics. Add to this a 25 mm soft dome tweeter, which, in order to reproduce high frequencies of uppermost accuracy, is just half the weight of most soft dome tweeters on the market today.

Dali ​Rubicon 2
$2995.

The RUBICON 2 stand speaker is the perfect blend between compact size and large sound performance. With the solid MDF cabinet, the RUBICON 2 has a perfect working environment for its ultra-light 29 mm soft dome tweeter, 6.5 inch wood fibre low-loss driver, and gold-plated terminals. It is rich on detail with an impressive soundstage and has surprisingly large bass reproduction with both precision and timing

Dali ​Epicon 8
$19995.

The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.

Prepare yourself for musical indulgence like never before – and for a beautifully statuesque design your guests will envy.

Dali ​Epicon 6
$13995.

The EPICON 6 is no less that DALI’s new reference loudspeaker. Standing on the shoulders of virtues from the acclaimed EUPHONIA series, EPICON takes you one step closer to “the real thing”.

The backbone of EPICON 6 is DALI’s new peerless driver technology. Featuring two 6 ½“ bass woofers, the unique Linear Drive Magnet as well as the breakthrough ribbon/soft dome hybrid tweeter unit the sound breaks with traditional loudspeaker conventions.

The EPICON 6 relies on a 2½-way system as – compared to the EPICON 2 – it features an additional woofer kicking in below 600Hz. However, for the highest frequencies the EPICON 6 also incorporates a ribbon tweeter as part of the hybrid tweeter, in reality turning the speaker into a ‘2½ + ½-way’ construction.

Dali ​Epicon 2
$7990.

The two channel speaker features a 6 ½“ bass driver and a soft cone dome tweeter. In fact, the technological breakthroughs designed for the larger EPICON 6 and EPICON 8 models have been channelled into EPICON 2 to create a speaker that performs way beyond its size expectations.

Canalis Allegra 2.0
$17500.

The Allegra 2.0 is our flagship speaker. Designed around the Anima, it is our inspiration for the CS products. To reach our performance goals for this speaker Joachim Gerhard chose to separate the midrange/tweeter cabinet from the bass cabinet, which allowed him to extend the design goal. Separating the cabinets also gave Allen Perkins at Canalis opportunities for mechanical noise reduction and resonance control. Optimization and isolation of the bass and midrange have a lot to do with the Allegra 2.0’s effortless performance.

In the midrange/tweeter cabinet, the Allegra 2.0 shares the same driver compliment as the Anima models. Unlike the Anima, the Allegra 2.0 midrange driver is not called upon to reproduce low frequencies. The cabinet shape and internal volume are calculated to get the best performance with a sealed, rather than a ported, box. When testing the Allegra 2.0 it became obvious that the combination of separated bamboo cabinets and Allen’s mechanical treatments resulted in a significantly quieter mechanical structure. In fact the Allegro 2.0 surpasses the dynamics and resolution of even the Anima CS, while the bass cabinet delivers a fast and articulate bass response.

The Allegra 2.0 midrange/tweeter cabinet is mass loaded with a hard coupled ¾” stainless steel plate that forms the base of the cabinet. A mechanical decoupling system attaches this high mass assembly atop the bass cabinet. The decoupled mass approach significantly reduces the transfer of bass energy which would otherwise interfere with the midrange/tweeter response. The midrange/tweeter crossover board is securely mounted to the stainless steel base, floating on decoupling material inside the bass cabinet. This arrangement provides an extremely quiet and vibration-free environment for the crossover and significantly aids in lowering the noise floor of the loudspeaker. For the Allegra 2.0 we also upped the parts caliber (and cost) by using only the finest capacitors and custom-designed low-frequency inductors, courtesy of audio engineer Brian Daley.​

Canalis Amerigo 2.0
$10000.

The elegantly proportioned, three-way floorstanding Amerigo introduces design innovations that are unique to this loudspeaker, including the aptly-named Air Drive bass-loading enclosure for extended low-frequency response and improved efficiency.

Amerigo offers true full-range, extremely high-quality sound in rooms where space or other considerations require the use of a speaker with a smaller footprint—while achieving bass definition, integration with the midrange, and treble and tonal accuracy, for natural, evenly-balanced yet articulate sound.

The Air Drive construction employs three separate internal chambers that spread the internal resonance over a variety of frequencies, while controlling the impedance curve that the speaker presents to the amplifier.

A conventional ported speaker typically has one resonance point, creating a large impedance dip. This affects not only the load presented to the amplifier, but causes a frequency response peak at the resonant frequency, which can adversely affect tonal neutrality.

The Amerigo’s three internal chambers create three flatter impedance dips, presenting easier-to-drive loads to the amplifier, thus evening out the frequency response. One of the impedance peaks dips at the low bass frequencies, so more amplifier current and better low-frequency drive is available in the deep bass.

This new type of tuning tightly controls the excursion of the woofers, which move less than in conventional designs. What the listener actually hears is not the woofer cones moving, but the air mass of the loading, hence the name Air Drive. To further refine its performance, the Amerigo’s crossover network includes a proprietary DC circuit that compensates for baffle diffraction and baffle step effects. The Amerigo delivers a surprising amount of bass from a modestly proportioned enclosure with an articulate midrange, exceptionally detailed highs, and a smooth, natural tonal balance with extraordinary clarity.

Canalis Cambria
$5500.

The Cambria is the latest design to come from Joachim Gerhard, and it challenges a few rules in loudspeaker design. Not that we’re trying to be tricky. It’s just that when advancements in technology happen, they can open doors that were previously thought to be closed.

Canalis Anima CS
$6000.

The Anima CS takes the Anima two-way monitor’s superlative performance up another level. The improvements? An overall reduction in the noise level of the speaker, higher resolution, and improved dynamics. And what did we do to get these improvements? First of all, the two loudspeakers incorporate the same drivers, bamboo cabinet, crossover topology, premium internal wiring and Eichmann connectors. These highly refined components are the basis for the already excellent performing standard version.

But, the CS version incorporates a number of special noise-reduction treatments (i.e.: Balanced Force Design) and custom parts. The first is a ¾ inch stainless steel base. The significant mass of the stainless steel base, added to the rigid bamboo cabinet, provides a nearly immovable baffle for the speaker drivers. It is also a low vibration platform where the Anima CS crossover is mounted using a floating and decoupled suspension system.

Dali ​Rubicon 6
$5995.

The cone used in the RUBICON series draws upon the heritage from the EPICON technologies, and has a light, rigid and randomly uneven structure. This lower the complexity of the central part of the motor, ensures even piston like movements, reduces the possibility of surface resonance greatly and creates an extremely low distortion within the RUBICON series. The soft low-loss rubber surround is designed and bespoke specifically for the RUBICON series, and all of the components are situated in an aluminum chassis designed for maximum airflow around the cone and magnet system.

Dali Rubicon 8​
$7995.

Assembled in-house, every driver in each of the RUBCION models are configured to match the model they are destined for. The three 6½ inch drivers used in RUBICON 8 all work together to reproduce a clean, detailed sound with no colouration. The RUBICON series draws upon the heritage from the SMC based ‘Linear Drive System, which was introduced with the EPICON series. With the use of the technology from the SMC drivers, we have taken a step closer to remove a very large part of the unwanted distortion. The bass drivers are optimized for long excursion, and the midrange driver for a large useful frequency range insuring that the roll-off is handled in the crossover and not in the driver. All this ensures that the benefit from SMC can be enjoyed by even more Hi-Fi lovers around the world.

Dali Zensor 5
$995

Today, we expect that little extra care and attention, when it comes to performance, visual appearance, and details. The ZENSOR 5 comes up to these expectations.

The ZENSOR 5 front baffle features the exclusive ZENSOR high-gloss lacquered finish, while high-grade vinyl adds an inviting and smooth look to the cabinet made of medium density fibreboard, incorporating soundproof material and internal bracings.

As its big brother, the ZENSOR 5 highlights a line of prominent features such as removable front grille, steady aluminium base, front mounted bass reflex port, and a single wired connection input of premium quality. 15 cm shorter than its larger sibling and still more than 80 cm tall, floor standing ZENSOR 5 will indeed prove to be a both recognizable and modern companion blending into the home décor in good taste.

Dali Zensor 3
$595.

DALI ZENSOR 3 is the newest member of the award winning ZENSOR series. This brand new speaker is developed and built to sound much larger than it actually is. Using a 7” woofer based on the technology from the ZENSOR 7 and the tweeter module from the ZENSOR 1, the ZENSOR 3 is able to recreate the high frequencies, the mid range and the low bass in the best possible way..

Dali Zensor 1
$395.

Making sense! That’s what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact cabinet that you can carry home under your arm.

Dali Opticon 8
$3795.

The OPTICON 8 is the pinnacle of the range. A towering floor-stander blessed with the best in DALI’s cutting-edge technology. If you want to move air with the ultimate in power and precision, the 8 is your answer.

With a capacious cabinet, 2 x 8 inch low-loss Wood Fibre Woofers to render the deep bass joined by a 6½ inch low-loss Wood Fibre Woofer to handle the mid-range and our trademark Hybrid Tweeter with a Soft Dome and Ribbon Tweeter, the OPTICON 8 is capable of filling even the largest rooms with utterly immersive audio.

This impressive 3 + ½-way system leaves nothing out and delivers a punchy bass, refined mid-range and high-definition high frequencies. Enhancing the quality of any source and putting in a performance that will eke out even the subtlest sounds of the recording.

Dali Opticon 6
$2495.

Standing a metre high and capable of seriously sonorous sounds, the DALI OPTICON 6 is a master of music that delivers thunderous bass and perfectly pitched mids and highs in unequalled equilibrium.

OPTICON 6 has all the virtues of the OPTICON 5 with the added power of an extra 6½ inch woofer. The featured twin 6½ inch low-loss Wood Fibre Woofers complete with our unique SMC magnet motor system, assisted by our combined Soft Dome and Ribbon Tweeter module, delivers audio with wow-factor. Combined with the extended internal cabinet volume, the OPTICON 6 reaches lower into the deep bass producing an even more impressive broader soundstage.

Its high sensitivity and even impedance load together with its impressive ability to reproduce undistorted audio makes the OPTICON 6 the perfect balance between size and performance. Add in gold-plated bi-wiring terminals, and the OPTICON 6 is the sender of soul-moving music to the ears of those that demand more.

Dali Opticon 5
$1995.

The DALI OPTICON 5 is the first of the floor-standing options of the OPTICON range. An exceptional stylish performance powerhouse thanks to the inclusion of our sensational 6½ inch low-loss Wood Fibre Woofer working in seamless conjunction with our Hybrid Soft Dome/Ribbon Tweeter, rendering sharp, precise and detailed low frequencies. Combined they produce a seemingly effortlessly transparent image that reflects the passion and energy of a live performance across a staggering soundstage that extends across the entire room with a coherent and open mid-range  – both epic and intimate.

Dali Opticon 2
$1295.

The DALI OPTICON 2 is our second compact stand-mount option that builds upon the power of the OPTICON 1 with a sizeable 6½ inch low-loss Wood Fibre Woofer and a 28 mm ultra-light Soft Dome Tweeter to make it musically meatier and bringing a little more muscle to the party. The 6½ inch woofer and the more voluminous cabinet make this speaker a true 2-way compact performer. The size of the woofer is matched with a large 28 mm soft dome tweeter to bring out every detail in the audio signal.

Dali Opticon 1
$995.

Small but perfectly formed, the DALI OPTICON 1 stand-mount speaker is curiously capacious with a compact cabinet that, despite its dimensions, holds almost five litres of air allowing for greater sympathetic resonance and adding to the pitch-perfect power of this deceptively mighty model.

Combine this capacity with a rear-mounted bass port, a 4 ¾ inch low-loss Wood Fibre Woofer, a 26 mm ultra-light Soft Dome Tweeter and gold-plated terminals and what the DALI OPTICON 1 delivers is the perfect balance of clear, detailed midrange and tight bass that belies its size.

Canalis Anima
$3250.

The Anima is our most popular loudspeaker. This two-way, compact monitor-style speaker has been an audiophile standard for decades, thanks to its ability to present music in a coherent fashion, tonally and spatially.

Designing a two-way loudspeaker is a two-edged sword: it can be a platform for a designer to show his or her mettle or a harshly revealing sonic microscope. Its relative simplicity (compared to multi-driver designs and their more complex crossovers and driver interactions) leaves no room to hide any sonic flaws.

Phono Preamplifiers
Rega Fono MC
$450.

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

Lehmann Silver Cube
$4,500.
  • Sensitivity for output level 775 mV/0 dBu (with activated high gain switch)
  • Gain 1 kHz
  • Maximum input level 1 kHz
  • Signal to noise ratio (RMS unweighted) MM: 3.8 mV/1 kHz; MC: 0.38 mV/1 kHz
  • MM: 46 dB; MC: 66 dB
  • MM: 50 mV; MC: 5 mV
  • MM: 78 dB; MC: 69 dB​
  • Gain 36 dB, 46 dB, 56 dB, 66 dB
  • Channel separation > 80 dB at 10 kHz
  • Input impedance 47 kohms, 1 kohm, 100 ohms
  • 1 x custom load
  • Output impedance 5 ohms
  • Input capacitance 47 pF to 1,370 pF
  • Channel mismatch typ. max. 0.1 dB
  • Bass filter 50 Hz, 6 dB/oct.
  • Power consumption app. 15 VA
  • Outer dimensions W x D x H Audio section: 300 mm x 195 mm x 48 mm
  • Power supply: 112 mm x 312 mm x 80 mm
  • Weight Audio section: 2.25 kg
  • Power supply: 2.8 kg
Music Hall Mini​
$90.
  • ​RIAA equalization +/- 1.5 dB, 20Hz to 20kHz
  • i/o connectors: rca, 3.5mm trs stereo
  • input sensitivity: 35 dB gain @1kHz, 47k Ohms Input Z
  • input capacitance: 5pf + cable capacitance
  • input impedance: 50k Ohms
  • output impedance: 1 K Ohms
  • max output level: >10dB @ 1kHz at .1% dist.
  • s/n ratio: >80 dB unweighted
  • thd .02% @ 1KHz
  • pwr: 9 – 15 VDC
  • indicator: 1 power LED
Music Hall PA 1.2
$175.
  • gain mm/mc 40dB / 60 dB
  • input sensitivity mm/mc 5mV/1kHz / 0.45mV/1kHz
  • input impedance mm/mc 47Kohms/120pF / 100 ohms/120pF
  • output voltage typically mm/mc 300mV@1kHz â�� 3mV / 0.3mV
  • total harmonic distortion mm/mc <0.01 / <0.05%
  • riaa curve accuracy 20Hz-20kHz / 0.5dB
  • snr mm/mc -86dB / -68dB (-94dB / -75 dB A weighted)
  • input voltage 15V/300mA AC
  • external power supply
  • rigid extruded aluminum chassis
Oracle Paris PH 100​ Mk II
$765.

The Paris PH100 is a versatile phono stage that can accommodate usage of any moving magnet or moving coil phono cartridges.  Indeed the PH 100 offers variable moving coil cartridge input impedance settings and variable gain using different jumper configurations. The resistive charge and gain setting values can be found in the technical specification page of the PH100.

Available in black or grey with a low gloss satin finish the PH100 carries the distinctive design of the Paris series as it uses the same wooden frame as its counterpart PH200. The Paris PH100 also uses the same analog modules and RIAA circuitry as the PH200 but distinguishes itself from it by using an internal power supply unit. Enormous care went into this power supply circuit as it is in big part responsible for the PH100’s performance and musicality. The new Paris PH100 will bring you to a re-discovery of your record collection and will deliver countless hours of enjoyable and satisfying musical experience!

Oracle Paris PH 200 Mk II​
$1,595.

The Paris PH100 is a versatile phono stage that can accommodate usage of any moving magnet or moving coil phono cartridges.  Indeed the PH 100 offers variable moving coil cartridge input impedance settings and variable gain using different jumper configurations. The resistive charge and gain setting values can be found in the technical specification page of the PH100.

Available in black or grey with a low gloss satin finish the PH100 carries the distinctive design of the Paris series as it uses the same wooden frame as its counterpart PH200. The Paris PH100 also uses the same analog modules and RIAA circuitry as the PH200 but distinguishes itself from it by using an internal power supply unit. Enormous care went into this power supply circuit as it is in big part responsible for the PH100’s performance and musicality. The new Paris PH100 will bring you to a re-discovery of your record collection and will deliver countless hours of enjoyable and satisfying musical experience!

Rega Fono Mini A2D​
$175.

The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from a moving magnet cartridge to a suitable level for all line level inputs of an audio amplifier. The new Fono Mini A2D benefits from an extruded aluminium case and very user friendly front and back panels that make this phono pre-amplifier a very easy product to use.

Rega Fono MC
$450.

The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading is available via dip switches conveniently placed on the rear panel with two different gain settings located on the back panel making the Fono MC compatible with most low output MC cartridges.

Rega Aria
$1,495.

The Aria is an “all analogue amplifier” with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they obstruct the signal path and degrade the sound quality. The Aria incorporates many innovative design ideas including a self-adjusting servo control to keep the MC input circuit at its optimum, compensating for any variations in ambient or operating temperature.

Both stages have their own separate input sockets and input pre-amplifier circuitry. This enabled us to design bespoke input circuitry for each cartridge type without compromise. Signal switching is performed at high level and low impedance (via relays) ensuring there is no degradation of the signal.

The MC input uses parallel connected, low noise FET’s (Field Effect Transistor’s) configured as a compound pair. The use of FET transistors ensures there is no bias current flowing in the cartridge coil so as not to upset the delicate magnetic geometry of the cartridge. The MC input has the provision for selecting resistive input loading of 70ohms to 400ohms and capacitive loading of 1000pF to 4200pF. The input sensitivity can be changed by 6dB via the back panel.

The MM input uses low noise, bipolar input transistors also configured as a compound pair. There are two separate power supplies for each channel and further sub-power supplies for each of the low noise input circuits. Nichicon FG electrolytic capacitors have been used in critical positions throughout the power supplies. Polypropylene capacitors have been used in the signal path and equalization networks. Discrete circuitry is used throughout the signal path ensuring full control of the circuit design.

Rogue Audio Triton
$995.

– Moving magnet (mm) or Moving coil (mc) operation
– High performance solid state circuit topology
– Three stages of amplification for ultra low noise
– Precise RIAA equalization +/- 0.1 dB 20-20KHz
– Massive fully regulated multistage power supply
– Toroidal transformer
– 20, 50, 100, 300, 1K, 47k 75K 100K Ohm loading options
– 0, 47, 150, 470,1K Picofared loading options
– Custom loading options available
– Hatch cover for easy loading access
– Four gain settings: 40dB, 55dB, 60dB, 65dB
– Ultra heavy-duty gold RCA inputs
– Precision components throughout
– Heavy machined aluminum faceplate
– Two heavy (2 ounce) copper circuit boards
– Teflon/silver plated hook-up wire
– Detachable IEC power cord
– 17″ W x 9″ D x 3.5″ H
– Shipping weight 18 lB
– Entirely designed and built in the USA
– 3 year limited warranty

Lehmann Decade
$2,099.
  • ​Input Stage: Dual mono Microphone preamp Chip newest generation
  • Gain settings: 36 dB, 46 dB, 56 dB, 66 dB
  • Max. gain : 66 dB
  • Internal impedances (selectable): 47 k, 1 k, 100 R
  • Onboard slot for custom impedance
  • Internal input capacitance and cap type: 47 p, 100 p, 220p, 1 n, KP 1 % and combinations (47 p always active)
  • Soft Bass Rolloff filter (toggle switch on face plate)
  • High Gain (toggle switch on face plate)
  • RIAA filter caps: MKP
  • Bass coupling after RIAA: MKP
  • Second gain stage: Dual Mono Burr Brown OPA 134
  • Discrete Output buffer for Zero global feedback (Bipolar Class A)
  • Power supply features on audio board: LC Pi-Filter, RC-Filters with extensive electrolytic bypass​
Lehmann Black Cube SE II
$1,149.
  • ​Input Stage: Dual mono Microphone preamp Chip newest generation
  • Gain settings: 36 dB, 46 dB, 56 dB, 66 dB
  • Max. gain: 66 dB
  • Internal impedances (selectable): 47 k, 1 k, 100 R
  • Onboard slot for custom impedance, additional hard wire slot
  • Internal input capacitance and cap type : 100 p, KP 1 %
  • RIAA filter caps: MKP
  • Bass coupling after RIAA: MKP
  • Second gain stage: Dual Mono Burr Brown OPA 134
  • Output capacitor: MKP
  • 16 different settings for optimized configuration of high pass filter
  • DIP-switch configurable
  • Discrete Output buffer for Zero global feedback
  • DC-Output jumper
  • RC-Filters with high electrolytic bypass
  • Soft Bass Rolloff filter
Bellari VP 130
$275.

The VP130 is a well designed RIAA phono preamplifier made to equalized phono signal to a line-level signal, and is intended for magnetic pickups. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. It’s the perfect blend of price and performance. Get the magical warmth of a tube phono preamp for an unrivaled price. This compact and affordable preamp effectively boosts the phono signal for any cartridge with an output of 3-5mV. It has a compact circuit board and uses a single 12AX7 tube in the output stage for that luscious midrange only tubes can provide. It’s also dead quiet, with a signal-to-noise ratio of 80dB. The VP130 also has a few added features that everyone will appreciate, including a 1/4” headphone jack on the back panel, a mute switch, a 20Hz (infrasonic) rumble filter, and separate output volume controls for the mains and headphones.

Bellari VP 530
$399.

The vp530 is a usb/tube phono preamp for use with moving-magnet and high output moving-coil cartridges. It includes a built in headphone amplifier, Burr-Brown A2D converter w/usb output, and RIAA curve/flat EQ. The vp530 is designed to amplify an RIAA equalized phono signal to a hi-level signal or provide a usb digital output. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musical than solid state preamplifiers. The real kicker aside from the price and stellar sound is that it’s manufactured in the US.

Creek OBH-15mk2
$595.

The OBH-15 mk2 has a completely new circuit design, with a discrete transistor MC and integrated circuit MM stage. Unlike its predecessor, the new amp has multiple gain settings and matching capabilities for capacitance and resistance. The signal required by most modern amplifiers is described as being ‘LINE’ level which is, in technical terms, between 200 and 500 milli-Volts sensitivity with a flat frequency response. Unless your amplifier has a specific ‘Phono’ or Disc input, the level will be too low to play vinyl and the frequency response will be wrong.

Dynavector P-75 Mk3
$895.
  • Phono to line level preamplifier
  • Total phono solution
  • Matches any cartridge type
  • Fully user adjustable
  • Very low noise
  • Very high RIAA accuracy
  • No hum!
  • Includes patented ‘Phono Enhancer’ option
  • Low cost, very high performance
  • new mk3 offers significant performance upgrade
Lehmann Black Cube Statement​
$449.
  • Selectable gain: 31dB, 41dB, 51dB, 61dB
  • Input impedance: selectable 47k, 1000 or 100 ohms
  • Free slot for custom impedance load
  • Input capacitance: 100pF
  • Passive RIAA-filter with high performance MKP foil capacitors
  • Soft bass roll-off filter (6dB/Okt @ 60Hz), jumper selectable
  • DC output jumpers
  • Double-sided audio board layout for optimal parts placement and trace routing
  • Burr Brown audio grade operational amplifiers
  • Gold-plated RCA audio connectors
  • External AC power supply
  • Nonmagnetic aluminum case
Lehmann Black Cube Original​
$629.
  • ​Input Stage Dual mono Microphone preamp Chip newest generation
  • Gain settings 36 dB, 46 dB, 56 dB, 66 dB
  • Max. gain 66 dB
  • Internal impedances (selectable) 47 k, 1 k, 100 R
  • Onboard slot for custom impedance plus additional hard wire slot
  • Internal input capacitance and cap type: 100 p, KP 1 %
  • Soft Bass Rolloff filter (jumper)
  • RIAA filter caps : MKP
  • Bass coupling after RIAA: MKP
  • Second gain stage: Dual Mono Burr Brown OPA 134
  • Discrete Output buffer for zero global feedback –
  • Output capacitor: MKP
  • DC-Output jumper
  • RC-Filters with high electrolytic bypass​
Lehmann Black Cube SE
$929.
  • 30VA (=10x Black Cube) high-current toroidal transformer with protection coil
  • Only top notch electronic parts
  • Ultra fast recovery-rectifying diodes
  • Advanced series voltage regulation stage
  • Output voltage: app. +/- 15VDC
  • Double sided PCB
  • Detachable cable with professional 4-pole XLR connector with gold-plated contacts
  • Aluminum case
  • Dimensions: 230mmDx90mmWx44mmH
  • All connectors at the rear side Lehmann Audio Phono Preamp Features and Specifications:
  • Input Stage: Dual mono Microphone preamp Chip newest generation
  • Gain settings: 36 dB, 46 dB, 56 dB, 66 dB
  • Max. gain: 66 dB
  • Internal impedances (selectable): 47 k, 1 k, 100 R
  • Internal input capacitance and cap type: 100p, KP 1 %
  • Soft Bass Rolloff filter (selectable)
  • RIAA filter caps: MKP
  • Bass coupling after RIAA: MKP
  • Second gain stage: Dual Mono Burr Brown OPA 134
  • Discrete Output buffer for Zero global feedback
  • Output capacitor: MKP
  • DC-Output jumper
  • Power supply features on audio board
  • RC-Filters with high electrolytic bypass
Rogue Audio Triton Tube
$995.

– Compatible with almost all low,medium and high output moving coil (mc)

and Moving magnet (mm) cartridges.
– Pure tube circuit topology
– Precise RIAA equalization
– Custom Cinemag step-up transformers
– Massive fully regulated outboard power supply

– Toroidal transformer
– Internal settings with most popular loading options
– Internal setting for 150 Picofared or 0 capacitance loading
– Three gain settings: 40dB, 55dB, 64dB
– Timer delayed start for minimum turn-on noise
– Subsonic filtering
– Ultra heavy-duty gold RCA inputs
– Precision components throughout
– Machined aluminum faceplate
– Heavy (2 ounce) copper circuit boards
– Teflon/silver plated hook-up wire
– Detachable IEC power cord
– 17″ W x 9″ D x 5.5″ H
– Shipping weight 21lb
– Entirely designed and built in the USA
– 3 year limited warranty (six months on tubes)

Preamplifiers
Rogue RP-7
$4,995.

With a perfect blend of tube smoothness and an almost unbelievable level of detail and transparency, the new RP-7 essentially redefines what a reference level tube preamplifier can achieve.

The RP-7 is our first balanced preamplifier designed on the cutting edge RP-X hardware and software platform and every aspect of the RP-7 design is aimed at maintaining near perfect signal integrity. Beyond the computer optimized circuit topology, all of the capacitors, resistors and other critical parts are of ultra-high quality assuring the highest sonic integrity. The sophisticated electrical design is based on pure class A tube amplification with mosfet output buffering to provide huge drive along with a super low output impedance.

Beyond the excellent sound, the feature rich RP-7 provides all of the functions demanded of a luxury hi-end preamp. Included are a home theater bypass, processor loop, mono button, defeatable display, slow start circuitry, and a host of other features. A full function remote provides additional convenience. Two pairs of XLR balanced inputs and three pairs of RCA line level inputs allow for numerous source components while two pairs of XLR balanced outputs along with two pairs of RCA variable outputs facilitate a wide range of output connectivity. Also included is a high power tube based headphone amplifier capable of driving even the most difficult headphones.

The attractive industrial design includes an easy to read OLED display that further enhances the preamp’s sleek and elegant appearance. The display provides all relevant information in large easy to read azure tinted characters. The ultra-high quality tactile buttons and knobs further add to the exclusive feel of the RP-7.

Rogue RP-1
$1,695.

Elegantly simple yet technically sophisticated, the RP-1 is our latest tube preamplifier based on the innovative RP-X platform. Stunning in both performance and design, the RP-1 provides all of the features you need for a truly high end system. Boasting outstanding specs and remarkable sonics, the RP-1 sets a new benchmark in affordable performance and functionality.

Beyond its superb preamplifier capabilities, the RP-1 offers numerous features to further enhance your listening experience. The onboard MM/MC phono has user adjustable gain settings of 43 and 58 dB to accommodate most popular cartridges. A wide variety of loading options also means your favorite cartridge can be configured to sound its very best. The discrete 1 Watt headphone amplifier will thrill you with its smooth and refined sound. Other features include home theater inputs for easy integration into your theater system, two pairs of variable outputs and a pair of fixed outputs. The seven button remote allows you to conveniently access volume, balance, selector and mute functions from your listening position. The elegant appearance of the RP-1 is further enhanced by an easy to read OLED display that provides volume, balance and source information in large easy to read characters. The display can also be turned off if desired.

Rogue RP-5​
$3,495.

The RP-5 is our first preamplifier based on the groundbreaking new RP-X platform. Silky smooth yet extraordinarily high tech, the RP-5 sets a new benchmark in performance and functionality. Utilizing four 12AU7 tubes in a mu-follower configuration, the computer optimized circuitry boasts outstanding sonics as well as industry leading specs.

The RP-5 offers much more than just sonic excellence with numerous features to further enhance your listening experience. The onboard MM/MC phono has user adjustable gain settings ranging from 40 to 60 dB. A wide variety of loading options means your favorite cartridge can be configured to sound its very best. A tube based headphone circuit offers smooth and detailed sound for your late night personal audio sessions. Other features include home theater inputs, a processor loop and mono button. The ten button remote allows you to conveniently access volume, balance, selector, mute, mono and on/off from your listening position.

The elegant appearance of the RP-5 is enhanced by an easy to read VFD display that provides volume, balance and source information in large easy to read characters.

Receivers
Magnum Dynalab MD 301
$3000.

When developing the Hybrid-Acoustic Circuitry that we first introduced in our MD 309, we knew we were onto something. In the 2-channel audio landscape, there was always a separation between those who favored the precision and sharp detail that is characteristic of many solid-state products, and those who preferred the natural sound staging noted by the lovers of triode-driven devices. But there were trade-offs. Short tube life, compromises in sound-quality or cost considerations neccessitated a difficult choice by audio lovers. So when we got to work in our design lab, we pushed for a novel approach.

Magnum Dynalab MD 306
$4500.

The 2nd introduction in our series of Hybrid Integrated Amplifiers, the MD 306 is another serious solution for the 2-channel audio enthusiast. With the same proven Hybrid-Acoustic circuitry found in all of our integrated amplifiers and receivers, the MD 306 is built on the backbone of our MD 209’s pre-amp and amplifier sections, boasting 125 Watts of output power with a flexible feature set. It is a hybrid integrated amplifer that can perform in a wide array of listening environments, and like all Magnum Dynalab products, it is built to withstand the most demanding operation over the long haul.

Magnum Dynalab MD 307
$5500.

The 3rd product to feature our in-house designed Hybrid-Acoustic circuitry, the MD 307 Hybrid Integrated Amplifier is, on the inside, a twin brother to the widely acclaimed MD 309 Hybrid Integrated Amplifier. Only the faceplate design and lack of a front-panel touchscreen differentiates the two products, with the MD 307 featuring identical circuitry and functionality to the MD 309. With output specs worthy of inclusion in any high-performance home audio system, and build quality that will ensure many years of service, the MD 307 is for the 2-channel audio-enthusiast who puts a high premium on uncompromising performance, without incurring additional costs for cosmetic highlights.

Magnum Dynalab MD 209
$5500.

From our pedigree in pure analog circuitry, we’re proud to introduce our most uncompromising 2 channel Audio Receiver. Loaded with features, and stocked with Magnum Dynalab’s unrelenting build quality and audio engineering, the new MD-209 is a future-ready anchor for your high-performance home audio system.

Magnum Dynalab MD 309
$7500.

MD 309 Integrated Amplifier: from our pedigree in pure analog circuitry, we’re proud to introduce our most uncompromising 2-channel Integrated Amplifier. Using the same Hybrid-Acoustic CircuitryTM found in our MD-209 Audio Receiver, JJ 6922 Cryovalve tubes, and stocked with Magnum Dynalab’s unrelenting build quality and audio engineering, the new MD 309 is a future-ready anchor for your high-performance home audio system. We believe it is the best Integrated Amplifier on the market.

Tonearms
Dynavector DV507 Mk2 Tonearm
$5,450.

The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.

As it is a bi-axis inertia controlled tonearm the DV 507, no matter the type of cartridge can trace the music signal grooves cut in the recording with extreme accuracy. The DV 507 also provides superb trackability on warped recordings. Resolution and musical detailing are quite remarkable.

Ortofon AS-309S Tonearm
$2,225.

 

  • Effective mass (without headshell): 4.0 g
  • Effective length (distance between the stylus and pivot point): 329mm
  • Mounting distance between the pivot point and turntable center: 314mm
  • Offset angle: 19 degrees
  • Overhang: 15mm
  • Tracking force adjusting range ( direct reading): 0 to 3g
  • Height adjustment range: 35mm to 55mm
  • Diameter of the armbase mounting hole: 19mm to 20mm​
  • Diameter of center shaft: 18mm

 

Ortofon RS-212D Tonearm
$3,359.

 

  • Effective mass (without headshell): 3.5 g
  • Effective length (distance between the stylus and pivot point): 231mm​
  • Mounting distance between the pivot point and turntable center): 216mm
  • Offset angle: 22 degrees
  • Overhang: 15mm
  • Inner null point: 58,5 mm
  • Outer null point: 114,5 mm
  • Tracking force adjusting range (direct reading): 0 – 5 g
  • Height adjustment range: 42 mm – 57 mm
  • Diameter of  the armbase mounting hole: 34 mm – 36 mm
  • Diameter of the center shaf: 16 mm
  • Fixing holes PCD: dia. 50 mm
  • Size/Thread: dia. 3.2 mm (dia. 3mm x 20mm and dia. 3 mm wood screw)
  • Digital scale DS-1 included

 

Ortofon RS-309D Tonearm
$3,569

Dynamic balance graduated vertical tracking force (VTF) control through a new spring design
• The new short wire spring, housed in the pivot case, eliminates unwanted vibrations in the tone arm
• VTF in the range 0-5 grams can be precisely adjusted by means of the supplied digital force gauge
• Anti-skate control adjusted by calibrated dial in the range 0-5 gram
• Tone arm height, and thereby VTA, is easy adjustable on the tonearm base.
• Detachable head shell and tone arm cable, with standard SME-type connectors

Rega RB-220 Tonearm
$395.

The latest design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each RB220 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels and performance way beyond the expectations of a product at this price point.

Rega RB-330 Tonearm
$595.

Our team have worked tirelessly to improve every aspect of this new tonearm. Offering improved ergonomics, usability and sonic performance.

Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated
arm clip and an improved spring housing with easier to read numbers. Other improvements include a Rega made, low capacitance phono cable terminated with high quality ‘Neutrik’ plugs, improved lower friction, precision horizontal and vertical bearings and a re-designed 100g mild steel balance weight.

Rega RB-808 Tonearm
$1,195

The RB808 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms each one is meticulously hand built by a team of highly skilled technicians. The RB808 has improved bearings and a tightened spindle fit tolerance over previous models (each bearing is individually selected to find the perfect match for the chosen spindle). This is a proven method of increasing the amount of detail retrieved from the record surface.

Rega RB-2000 Tonearm
$2,195.

The RB2000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand built by a team of highly skilled technicians. The RB2000 uses improved bearings with each one being hand selected to be an interference fit with the paired spindle matching both the inside and outside diameters. This is a Rega developed method of increasing the amount of detail retrieved from the record surface, designed specifically to maximise performance of the tonearm and cartridge.

Wilson Benesch ACT 25 Tonearm
$3,495.

The new A.C.T. 25 builds upon a Wilson Benesch’s the illustrious history of the Analogue Collection.

With the exception of Wilson Benesch’s own reference level, Nanotube One – the new A.C.T. 25 Tonearm is the world’s lightest, stiffest and most highly optimised tonearm. Torsionally 10x stiffer than titanium, half the mass of aluminium, 5x the specific stiffness of steel and with a damping coefficient an order of magnitude greater than any conventional engineering material.

Thanks to a high-grade pre-preg carbon fibre, the A.C.T. 25 Tonearm is 15% lighter than the A.C.T. 0.5 Tonearm, with no loss in stiffness or damping. The quality of the finish is exemplary, meanwhile the A.C.T. 25 Tonearm draws directly from the reference level Nanotube One Tonearm with an all the carbon fibre bias plate.

Ortofon AS-212S Tonearm
$2,099.

 

  • Effective mass (without headshell): 3.5 g
  • Effective length (distance between the stylus and pivot point): 231mm
  • Mounting distance between the pivot point and turntable center): 216mm
  • Offset angle: 22 degrees
  • Overhang: 15mm
  • Inner null point: 58,5 mm
  • Outer null point: 114,5 mm
  • Tracking force adjusting range ( direct reading): 0 to 5g
  • Height adjustment range: 35mm to 55mm
  • Diameter of the armbase mounting hole: 19mm to 20mm
  • Diameter of center shaft: 18mm
  • Optional counterweight for heavier cartridge between 26 and 38 grams

 

Ortofon TA-210 Tonearm
$1,994

 

  • TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings
  • TA-210 has a standard 5-pin DIN connector for tonearm cable
  • The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
  • Counterweight with Inner/outer scale
  • Inner scale to be applied with main counterweight
  • Outer scale to be applied when extra mass ring is added​
  • Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
  • TA-210 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
  • Extra mass ring for heavier cartridge and headshell combinations included (the extra mass ring may need to be attached to achieve proper tracking force)

 

Michell TecnoArm Mk II Tonearm
$1,195

The Michell TecnoArm II has brought some improvements to this popular tonearm. Now using the latest 3-point mount, the TecnoArm II is based on the Rega RB202 tonearm and uses a new arm tube which is more rigid than its predecessor. The taper on the arm tube has a new profile to improve sound reproduction and there are larger webs to stiffen the bearing to arm tube interface. The headshell has been re-designed as well. A proprietary stress relieving process is applied to the arm tube to toughen the bearing housing and headshell areas. The arm tube mass is lowered at the headshell end, with 22 holes precision drilled on the underside. This increases trackability and reduces unwanted resonances. The underside of the headshell is aligned to the main bearings and precision milled in a jig, ensuring zero azimuth for the cartridge. The arm is internally foam-damped and rewired with one continuous length of Michell’s proprietary 99.999% pure silver Litz wire between Michell’s own silver-plated machined cartridge clips and Michell’s own silver-plated billet brass RCA plugs. The underslung TecnoWeight counterweight is supplied with two weights: the lighter one for cartridges between 3 and 6 grams, the heavy one for cartridges between 6 and 13 grams. An optional extra heavy weight is available for cartridges weighing up to 16 grams. The TecnoWeight has a precision vernier adjustment for setting tracking weight in 1/10th gram increments without need for a stylus scale. Michell’s hasn’t forgot about VTA adjustment. Their ingenious 3-point VTA adjuster is included allowing for arm height adjustment without arm removal. The arm is supplied with 3 shorter arm board standoffs and 3 shorter de-coupling standoffs giving a wider range of adjustment on all vintages of Michell Gyro or Orbe turntables. Mounting template, mounting screws, alignment protractor and instructions are included.

Nottingham Ace-Space Tonearm
$1,895.

$1,595 Ace-Space​ 10″           

$1,895 Ace-Space​ 12″

The Nottingham design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham have also developed a proprietory damping material, the viscosity of which is such that it does not flow and does not require ‘settling time’. This material is applied to the centre pivot and the stabilizer bars. Nottingham uses carbon fibre tubes with the fibres oriented the length of the tonearm not wrapped around it. This greatly increases the strength, resonance control and rigidity of the arm. The headshell is also unusual in that the orientation is in direct line with the tonearm and not offset in any way. The headshell also has no finger lift. These two features insure that the arm is properly balanced from side to side and that no uncontrolled resonances are running around the headshell.

The Ace Space tonearm is a beautifully hand crafted design. It features an ultra light weight carbon fibre arm tube and uses a damped unipivot bearing. This damping means this arm is as easy to handle as a fixed pivot tonearm, suffering none of the instability you otherwise tend to get when cueing. It produces a delightfully natural sound with exceptional speed and good dynamics.

Nottingham Ace-Anna Tonearm
$3,695.

$3,295 Ace- Anna 10″

$3,695 Ace- Anna 12″

The Ace Anna Arm design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham Analogue have also developed a proprietory damping material, the viscosity of which is such that it does not flow and does not require ‘settling time’. This material is applied to the centre pivot and the stabilizer bars.

Nottingham Analogue uses carbon fibre tubes with the fibres oriented the length of the tonearm not wrapped around it. This greatly increases the strength, resonance control and rigidity of the arm. The headshell is also unusual in that the orientation is in direct line with the tonearm and not offset in any way. The headshell also has no finger lift. These two features ensure that the arm is properly balanced from side to side and that no uncontrolled resonances are running around the headshell.

It produces a delightfully natural sound with exceptional speed and good dynamics.

Nottingham Interspace Tonearm
$995.

Basic Nottingham Analogue turntable arm of simplified construction (no vertical height adjustment screws to facilitate arm). Length of 10 inches. The design of the suspension unipivot-locked. The beam of carbon fiber. Distance Mounting – 222mm.

Oracle SME V Tonearm
$7,250.

SME engineers, recognising the potential of the latest complementary equipment, accepted the challenge to design and build a pick-up arm which unlike others in existence would make no detectable sound contribution of its own. The work took almost four years and the measure of its success is the acceptance of the Series V precision pick-up arm by technical experts and users as one of the world’s truly great audio products.Series V sound has an almost startling dynamic range and neutrality enabling high levels to be enjoyed. It escapes the ‘LP’ sound and demonstrates that structural resonances in pick-up arms are responsible for much that makes vinyl records readily discernible from master tapes.

The functioning of a pick-up arm appears simple but is in fact very complex. All cartridges employ relative motion between armature and stator portions of a generating system to produce the signal output. Reproduction can only be true therefore when all movement representing groove modulation is made by the armature to which the stylus cantilever is attached and none by the stator represented by the cartridge body. Unless the pick-up arm holds the latter against even the minutest movement at audio frequencies the signal will be modified in some way. The result is a subtle loss of clarity, dynamic range and transient attack that can make the sound from even the best system tiring to listen to.

Oracle SME V Tonearms all come in silver finish with Oracle branding and MCS-150 (Mono Crysal Silver) internal wiring.

Oracle SME 345 Tonearm
$3,600.

SME engineers, recognising the potential of the latest complementary equipment, accepted the challenge to design and build a pick-up arm which unlike others in existence would make no detectable sound contribution of its own. The work took almost four years and the measure of its success is the acceptance of the Series V precision pick-up arm by technical experts and users as one of the world’s truly great audio products.Series V sound has an almost startling dynamic range and neutrality enabling high levels to be enjoyed. It escapes the ‘LP’ sound and demonstrates that structural resonances in pick-up arms are responsible for much that makes vinyl records readily discernible from master tapes.

The functioning of a pick-up arm appears simple but is in fact very complex. All cartridges employ relative motion between armature and stator portions of a generating system to produce the signal output. Reproduction can only be true therefore when all movement representing groove modulation is made by the armature to which the stylus cantilever is attached and none by the stator represented by the cartridge body. Unless the pick-up arm holds the latter against even the minutest movement at audio frequencies the signal will be modified in some way. The result is a subtle loss of clarity, dynamic range and transient attack that can make the sound from even the best system tiring to listen to.

Oracle SME V Tonearms all come in silver finish with Oracle branding and MCS-150 (Mono Crysal Silver) internal wiring.

Oracle Paris Tonearm
$1,050.

The Oracle Paris tonearm is a Pro-Ject 9cc tonearm that has had its performance greatly enhanced by the addition of a vibration and resonance control system. This collaboration with Pro-ject comes from the long time friendship of Jacques Riendeau and Heinz Lichtenegger who was Oracle’s distributor in Austria for many years. Development of the Delphi MK VI micro vibration stabilisation system led to significant improvements in sound. Applying that very same design philosophy led to the develeopment of the Paris tonearm micro vibration damping system. A small “paddle” attached to the belly of the tonearm that dips into a narrow arc-shaped trough of silicone fluid was added to the 9cc tonearm. This damping mechanism effectively reduced the unwanted resonances and vibrations in the tonearm.

Ortofon TA-110 Tonearm
$1,679

 

  • TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings
  • TA-110 has a standard 5-pin DIN connector for tonearm cable
  • The tonearm geometry allows for a Baerwald alignment (also the IEC recommendations)
  • Counterweight with Inner/Outer scale
  • Inner scale to be applied with main counterweight
  • Outer scale to be applied when extra mass ring is added​
  • Counterweight will work with headshell+cartridge mass approximately in the range 20 to 28g
  • TA-110 is fitted with a standard headshell connector and can easily be adjusted in accordance with the included mounting template
  • Extra mass ring for heavier cartridge and headshell combinations included, e.g. SPU cartridges (the extra mass ring may need to be attached to achieve proper tracking force)

 

Wilson Benesch Nanotube One Tonearm
$4,900.

As the world’s leading authority and pioneer of the use of carbon fibre technology in audio structures Wilson Benesch is delighted to announce, the latest results of its on going research and development.

There are three key factors in the design of the tube of any tonearm:~

1. The form of the tube: Based on natures’ rules Hyperbolic form

2. The stiffness of the tube: Strength facts, compare Magnesium 275 MPa to Nano carbon 62,300 MPa

3. The damping capabilities of the tube: Anisotropic materials like carbon fibre direct energy and exhibit high levels of damping perpendicular to the fibre. Carbon fibre is vastly superior to metal structures that propagate energy in all directions very efficiently.

Tuners
Magnum Dynalab MD 90 T SE
$2275.

Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-art in analog FM tuner design.

As did the FT-101A, the MD 90TSE combines the very latest in discrete, analog technology. In addition to its highly renowned MOSFET front end, which provides 4 stages of very careful and precise RF amplification, we have added the Triode audio section, which includes a Philips military grade JJ 6922 tube in the amplification stage. This addition provides audio realism and the bigger sound stage characteristics heard only through the tube experience.

Magnum Dynalab MD 807
$4500.

When creating a line of INTERNET MEDIA TUNERS worthy of inclusion in any high-performance audio system, we wanted to build not only world-leading products, but also a flexible line-up. Boasting the same functionality found in our MD 809 INTERNET MEDIA TUNER, the MD 807 is a product built with the audio-purist in mind. With simplified styling, the MD 807 features a beefy audio stage, our top-end DAC design not often found in a source device. It is yet another product that is helping us put Internet radio and connected digital music collections on the same plane as more conventional sources in home audio.

Magnum Dynalab MD 806
$2700.

The 2nd introduction in our line-up of INTERNET MEDIA TUNERS , the MD 806 brings years of expertise in analog sound staging, our proven development in D-to-A conversion technology, and innovative new software to unlock a near limitless access to music. With access to over 20,000 Internet radio stations and the ability to unlock the true sound potential in your digital music collection, the MD 806 can be a true staple among your collection of source audio products.

Magnum Dynalab MD 801
$1600.

Our line of INTERNET MEDIA TUNERS starts with the MD 801, but this product is far from entry-level. It is, like our long-standing line of FM tuners, worthy of inclusion in any high-performance home audio system, and even whole-house installations. And with access not only to Internet radio, but also an easy way to navigate your existing collection of digital audio, our line of INTERNET RADIO TUNERS is an exciting next step in the evolution of distributed audio.

Magnum Dynalab MD 109 T
$10080.

Primary highlights include an ultra stable power supply, a direct output Triode audio section and most importantly, the introduction of the World Source PlatformTM.

The World Source PlatformTM represents the culmination of 2 years of internal development, and the commitment with which we have embraced the evolution of the multi-format audio source environment that we live in today.

Designed to remain perpetually current, the MD 109 starts with receiving and delivering with sonic accuracy all terrestrial FM signals better than any FM tuner that we have ever developed. Beyond this, it is also upgradeable to accommodate digital audio from various sources, including satellite radio, CD, DVD and Internet Sources. Quite simply, the MD 109 serves as your source component for all future listening options and variables.

Magnum Dynalab MD 108 T
$7500.

The predecessor and backbone of the new MD 108T Triode Tube FM Tuner, the MD 108, is one of the most successful standalone FM tuners we have ever introduced. It has been a staple of the Magnum Dynalab collection for over 10 years and the first of our tuners to employ the distinctive and incredibly precise MAGIC EYE tube for tuning, and also the first of our products to utilize a separate audio stage within the unit.

​ In 2005, the Magnum Dynalab design team took this discrete audio stage to the next level. Our proprietary TRACCTM technology (Triode Reference Audio Control Center) was introduced first with the launch of the MD 109 FM Tuner, and this innovative design has resulted in our most impressive audio output ever. With our most inspiring audio section now available to the market, we felt it appropriate to apply this new technology to some of our classic Analogue FM tuners. Introducing the MD 108T.

Magnum Dynalab MD 107 T
$4500.

New for 2010, the MD 107 FM Tuner is a worthy replacement of one of our long-standing flagship products, the MD 106T. Now standard on many of our high-performance tuners, the MD 107 uses two 6922 MD Triodes in the audio amplification stage, and features upgraded capacitors, tighter tolerances on components in the RF section, and an improved power supply. It also comes equipped (as an option) with our onboard DAC, with available S/PDIF and USB 2.0 inputs, both of which are selectable via the optional remote or the faceplate. For more information on our DAC upgrade, click here.

Magnum Dynalab MD 105
$3000.

Another new FM tuner for 2010, the MD 105T is built off the platform of our now discontinued MD 102T FM tuner, with a selection of component upgrades throughout the unit. Built with RF components that are produced to even tighter tolerances than in the discontinued MD 102 & MD 102T, the 105 also features capacitor upgrades and a more stable power supply, along with the same MD Reference 6922 tubes in the amplification stage of the audio section.

With improving RF transmission equipment around the world, this Triode tuner, with its distinctive audio stage, allows you to experience FM as it was intended, with the full emotion and zeal with which the music was originally recorded. It is pure, unaltered, source audio.

The MD 105T uses our proven RF design and includes a collection of improvements to our audio staging. This includes our unrelenting focus on a complete grounding circuit to eliminate any unwanted stray signals, and most importantly, a zero feedback design in the audio stage, ensuring the waveform is unaltered through the output circuit. It is a truly high-performance product, worthy of inclusion in any audiophile’s audio system​

Magnum Dynalab MD 105 T
$3600.

Another new FM tuner for 2010, the MD 105T is built off the platform of our now discontinued MD 102T FM tuner, with a selection of component upgrades throughout the unit. Built with RF components that are produced to even tighter tolerances than in the discontinued MD 102 & MD 102T, the 105 also features capacitor upgrades and a more stable power supply, along with the same MD Reference 6922 tubes in the amplification stage of the audio section.

With improving RF transmission equipment around the world, this Triode tuner, with its distinctive audio stage, allows you to experience FM as it was intended, with the full emotion and zeal with which the music was originally recorded. It is pure, unaltered, source audio.

The MD 105T uses our proven RF design and includes a collection of improvements to our audio staging. This includes our unrelenting focus on a complete grounding circuit to eliminate any unwanted stray signals, and most importantly, a zero feedback design in the audio stage, ensuring the waveform is unaltered through the output circuit. It is a truly high-performance product, worthy of inclusion in any audiophile’s audio system​

Magnum Dynalab MD 90
$1400.

Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-art in analog FM tuner design.

As did the FT-101A, the MD 90TSE combines the very latest in discrete, analog technology. In addition to its highly renowned MOSFET front end, which provides 4 stages of very careful and precise RF amplification, we have added the Triode audio section, which includes a Philips military grade JJ 6922 tube in the amplification stage. This addition provides audio realism and the bigger sound stage characteristics heard only through the tube experience.

Magnum Dynalab MD 90 SE
$1775.

Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-art in analog FM tuner design.

As did the FT-101A, the MD 90TSE combines the very latest in discrete, analog technology. In addition to its highly renowned MOSFET front end, which provides 4 stages of very careful and precise RF amplification, we have added the Triode audio section, which includes a Philips military grade JJ 6922 tube in the amplification stage. This addition provides audio realism and the bigger sound stage characteristics heard only through the tube experience.

Magnum Dynalab MD 90 T
$1785.

Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-art in analog FM tuner design.

As did the FT-101A, the MD 90TSE combines the very latest in discrete, analog technology. In addition to its highly renowned MOSFET front end, which provides 4 stages of very careful and precise RF amplification, we have added the Triode audio section, which includes a Philips military grade JJ 6922 tube in the amplification stage. This addition provides audio realism and the bigger sound stage characteristics heard only through the tube experience.

Magnum Dynalab MD 809
$8000.

I ​n developing our new line of Internet Radio Tuners (Wifi Tuners), we first gave consideration to how we have created certain products that have stood out from the landscape of hi-fi audio equipment. The timeless Etude FM Tuner launched back in 1988, the MD 208 (Stereophile’s 2000 Product of the Year), and more recently the launch of the World-Source Platform and the MD 109 – all have helped affirm our ability to design and build products that are truly world-leading. Our newest offering, the MD 809T Internet Radio Tuner, is certain to be another one of these products. We feel it is the best Internet Radio Tuner on the market today.

Into it we poured every innovation in audio technology we have developed over our 25+ year lifetime, and taken ‘attention to detail’ to a level seen only seen in a select few products in our category. Boasting more functionality than any product we have developed, the MD 809 may quickly take over the ‘most listened to’ position among your source-audio products.

Equipped with access to terrestrial FM broadcasts and DAB/DAB+ (where available), the MD 809’s functionality really shines when accessing over 20,000 Internet radio stations via the on-board wi-fi antenna or connected LAN line. This huge collection of music is all available via our intuitive, touch-screen driven software accessible on both the faceplate AND remote. Or if you prefer, plug in your USB or network-stored library of music files (including AAC+, Real, MP3, FLACs and WMA), and navigate your digital music collection with ease.

Of course, smooth and simple functionality is a mere appetizer when compared to the MD 809’s main course. And that is a music experience so realistic, so open and transparent and so incredibly detailed, that it will change your opinion not only about Internet Radio, but also about all digital audio sources. Despite the variability in bit rates and sample rates among Internet radio audio broadcasts, or even among your collection of digital audio files, the MD 809 Internet Radio Tuner will define a new category of audio products in any home audio equipment collection.

Turntables
Music Hall USB-1 Turntable
$249.
  • ​extremely quiet belt drive, 2-speed turntable
  • aluminum die-cast platter
  • 33 1/3 and 45 rpm playback speeds
  • high gloss black finish
  • encode mp3’s and transfer them to your iPod using iTunes
  • USB output for converting vinyl to PC or MAC
  • USB cable supplied
  • free Audacity software included
  • analog output via built-in Phono Amp or direct line out
  • static balanced S-shaped tonearm w/detachable headshell
  • Audio Technica AT3600L moving-magnet cartridge supplied
  • anti-skating control for increased stereo balance
  • +/- 10% adjustable pitch control
  • dust cover included
  • designed and developed in the US and France
Nottingham Ace Spacedeck Turntable
$4,490.
 $2,895.00 Ace-Spacedeck Table Only

$4,490.00 Ace-Spacedeck w/ 10″ Ace-Space Arm​  

Latest edition of world-famous hand-made Space Deck; Leaded bronze arm base and motor pod; Ultra-low noise, ultra-low torque synchronous motor; Oil pumping platter bearing; Optional graphite Heavy Kit upgrade available.​

More Info>>

Nottingham Interspace Jr Turntable
$2,495.

$2,495.00 Interspace Jr. w/ Interspace Arm   

Hand-made, belt driven, motor-in-plinth design; 9″ Ace Interspace carbon fibre, unipivot arm included. Shares the same classic, heavy alloy platter of the “Space Deck”, same bearing as the classic “Space Ship” and the classic ultra-low noise, ultra-low torque synchronous motor.

More Info>>

Music Hall ikura Turntable
$
  • music hall’s unique split-plinth design
  • gorgeous high gloss white or black finish
  • top tier one piece alloy tonearm
  • flexible internal tonearm wire drawn from high purity copper
  • counterweight’s center of gravity is level with the stylus tip
  • resonance damping counterweight is decoupled from the tonearm
  • separately isolated dc synchronous motor
  • two speed (33/45 rpm) pulley
  • ortofon 2m blue moving magnet cartridge with user replaceable
    nude elliptical diamond stylus (a $225 value)
  • cartridge supplied is mounted and properly aligned
  • precision stainless steel main bearing sheathed in teflon
  • main bearing provides noise free fluid operation
  • dynamically balanced MDF platter
  • soft felt mat
  • high quality gold rca connectors and detachable phono cable
  • special vibration damping adjustable feet
  • low noise fully manual belt drive design
  • excellent instruction manual and easy assembly
  • dust cover and 45rpm adaptor
  • not compatible with music hall cruise control
Oracle Origine Turntable
$1,880

$1,880.00 Origine w/ Origine Arm  

Specifications:

Drive: AC synchronous outboard motor, belt driven, external power supply.
Platter: One-piece acrylic platter derived from the Paris MkV.
Tonearm: Unipivot with adjustable effective mass to accommodate various phono cartridge compliances.
Phono cartridge: Ortofon 2M Blue (optional). Pre-installed and calibrated at the factory!
Adjustable delrin feet system.
Tonearm effective length: 240mm
Platter spindle center to tonearm mounting hole center : 225mm

Oracle Delphi Mk VI Turntable
$9,700.

Delphi Mk VI Options

$8,300.00 w/ Regular Power Supply​
$8,850.00 w/ Regular Power Supply and Dustcover
$9,150.00 w/ Turbo Mk 2 Power Supply
$9,700.00 w/ Turbo Mk 2 Power Supply and Dustcover   

Since 1979, Oracle Audio has been producing state-of-the-art stereo components. Oracle’s first turntable, the AC model, introduced new features and technologies to the analog world. Oracle’s Delphi MkI was introduced in 1980. The new Delphi MkVI is the sixth edition of the Delphi’s line heritage. Through the years the Delphi won numerous prestigious awards and it has been acclaimed worldwide! The Delphi MkVI was awarded the Analog Grand Prix 2010 Gold Award from Japan, more recently Enjoy the Music.com’s Best of 2014 Blue Note Award. To this day the Delphi is still Oracle’s flagship product and still serves as a reference in the analog community!

Using the finest components and design technologies, the Oracle Delphi MkVI is exquisite in all aspects. Like its predecessors the Delphi MkVI is supported by three suspension pillars to efficiently control unwanted vibrations. It harbors a massive belt-driven platter that uses a center clamp system first introduced by Oracle back in 1979. The Delphi’s floating chassis, milled from solid billets of aluminum, is an extremely rigid and inert structure supporting the tonearm and the platter. While the fabrication process of the Delphi is one of minute precision its development process is one of science and emotion; to bring out all of the music’s depth and detail. Truly the Delphi MkVI is a work of art!

The Delphi MkVI was launched in late 2009 featuring our new and innovative Micro Vibration Stabilizer System which took its performance level to new heights!  Today, summer 2015, we are introducing the Delphi MkVI Second Generation. This latest edition features a two-piece platter assembly which greatly facilitates drive belt installation while also reducing platter resonances. Our drive electronics module was also modified and now harbors a larger power reserve which provides more torque to the motor. Although it is offered as an option, our recently revised Turbo Power Supply MkII exceeds all our expectations! It has a signal that is so stable it outperformed our references! We consider the Turbo Power Supply MkII as a fundamental part of the Delphi MkVI Second Generation.

Rega P3 Turntable
$1,145.

$1,145.00 Planar 3 Elys

$945.00 Planar 3 w/o Cartridge     

Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega’s Roy Gandy, two years to develop the all new ‘Planar 3’ following the biggest re-design of the iconic ‘Three’ model ever seen.

Our team have worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new ‘Planar 3’ is truly a new turntable for 2016 carrying over just two components from the previous model.

Rega P2 Turntable
$675.

$675.00 Planar 2    

The new Planar 2 was developed over the past two years alongside the recently released Planar 3. Featuring the brand new RB220 tonearm which is packed with groundbreaking new features.

A new 24v, low noise motor, acrylic laminated plinth, newly designed central bearing and so much more. Every feature of this innovative new turntable is designed to extract the maximum amount of information and detail from your vinyl collection.

Rega P1 Turntable
$475.

 $475.00 Planar 1

The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balance weight onto the rear of the tonearm as far as it will go, remove the stylus guard and start spinning your favourite vinyl.

Every single aspect of the Planar 1 has been meticulously designed to improve performance. For the first time the Planar 1 is now running a 24v, low noise, synchronous motor to reduce vibration transfer combined with our brand new RB110 tonearm fitted with Rega’s bespoke zero play bearings. Only sharing the drive belt, sub platter and dust cover from the outgoing RP1, this is truly a new turntable for 2016.

Well Tempered Lab Amadeus GTA Turntable
$4,850.
​ The Amadeus was our first and original design that featured the now quite famous and innovative “golf ball” tone arm. The MKII version has the same dual layer MDF plinth and acrylic platter along with our recently developed Symmetrex tone arm.

• Symmetrex tone arm configuration
• “Zero Tolerance” platter bearing
• Servo controlled motor with vibration controlled mounting
• 0.004” polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer lacquered MDF sandwich construction plinth
• Isolation feet included

  • ​music hall’s unique dual plinth construction
  • one-piece full carbon fiber tonearm
  • counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
  • completely isolated/decoupled DC motor with 33⅓ and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
  • motor sits on its own resonance damping puck
  • Optional Ortofon 2M Bronze cartridge with a nude fine line stylus
  • ($440 value)
  • the supplied cartridge is properly aligned and mounted
  • precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
  • non-resonant acrylic platter with metal screw-on record clamp
  • and soft felt mat
  • high quality gold RCA connectors and detachable phono cable
  • adjustable tip toe feet with anti scratch cups
  • low noise fully manual belt drive design
  • built-in round spirit level for proper leveling
  • dust cover and 45rpm adaptor included
  • excellent instruction manual and easy assembly

USB-1 ​   $249.95

Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task. It took our team of designers headed up by Rega’s Roy Gandy, two years to develop the all new ‘Planar 3’ following the biggest re-design of the iconic ‘Three’ model ever seen.

Our team have worked tirelessly to improve every aspect of this turntable offering improved ergonomics, usability and first and foremost, sonic performance.The new ‘Planar 3’ is truly a new turntable for 2016 carrying over just two components from the previous model.

RP-6 Exact                  $1,990.00

RP-6 w/o Cartridge    $1,495.00

​ Based on the ever popular Gyro SE, the Orbe SE is Michell’s flagship turntable. It improves upon the Gyro in a number of areas. It employs a similar European-made DC motor housed in a significantly heavier bronze and aluminum housing, with the addition of a tachometer feedback signal that is sent to the NC Tacho power supply. Using this signal, this larger power supply constantly adjusts the motor speed in real time for rock solid speed stability under varying environmental or loading conditions such as caused by stylus drag for instance. Additionally the NC Tacho power supply uses patented Never Connected circuitry which totally breaks the conduction path from AC mains pollution, preventing unwanted contamination of the DC voltage that is fed to the motor. The sound improvement is stunning. Like the Gyro SE, the massive acrylic platter has most of its weight distributed at its periphery and uses a screw down clamp for more precise clamping of the LP. The cast aluminum chassis is damped with Michell’s DensoDamp compound to reduce ringing. Finally, the Orbe SE rests on a second spider that is de-coupled from the first via three single point contacts.

Ace-Spacedeck   $2,895.00

Ace-Spacedeck w/ 10″ Ace-Space Arm​  $4,490.00

  • ​music hall’s unique dual-plinth construction
  • gorgeous high-gloss piano black lacquer finish
  • top tier 9” carbon fiber tonearm
  • counterweight’s center of gravity is level with the stylus tip,
  • is decoupled from the arm, and acts as a resonance damper
  • DC synchronous motor for superior speed stability,
  • separately isolated on the lower platform
  • two-speed stepped motor pulley for 33⅓ and 45 rpm
  • Ortofon 2M Blue cartridge with replaceable nude
  • elliptical diamond stylus ($236 value)
  • the cartridge supplied is properly aligned and mounted
  • precision stainless steel main bearing sheathed in Teflon®
  • for noise-free fluid operation
  • dynamically balanced alloy platter with soft felt mat
  • screw-on record clamp
  • high quality gold RCA connectors and detachable phono cable
  • special vibration damping adjustable feet
  • built-in round spirit level for proper leveling
  • low noise fully manual belt-drive design
  • excellent instruction manual and easy assembly
  • dust cover and 45 rpm adaptor included

The Rock 7 is an open frame, two speed, belt drive turntable mounted on three Seismic Load Cells™. It is the latest evolution of Townshend Audio’s legendary Rock turntables, so named because of the solidity of the bass they can deliver. This is a result of the unique front end damping trough which greatly diminishes vibration in the arm and cartridge and results in the cleanest sound available with vinyl.

MMF-5.3​   $995.00

Delphi Mk VI w/ Regular Power Supply​          $8,300.00
w/ Regular Power Supply and Dustcover         $8,850.00
w/ Turbo Mk 2 Power Supply                            $9,150.00
w/ Turbo Mk2 Power Supply and Dustcover   $9,700.00

HyperSpace   $4,495.00

HyperSpace 10″ Ace-Space Arm  $6,590.00

Dais Turntable w/ Wave Mechanic Power Supply   $8,695.00

MMF-11.1​   $4,495.​00

​• Aluminium base
• “Zero Tolerance” platter bearing
• Servo controlled motor, with vibration controlled mounting
• 0.004mm Polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping.
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer aluminium sandwich construction plinth

Well Tempered Lab Amadeus Mk II Turntable
$2,850.

The Amadeus was our first and original design that featured the now quite famous and innovative “golf ball” tone arm. The MKII version has the same dual layer MDF plinth and acrylic platter along with our recently developed Symmetrex tone arm.

• Symmetrex tone arm configuration
• “Zero Tolerance” platter bearing
• Servo controlled motor with vibration controlled mounting
• 0.004” polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Acrylic platter
• Dual layer lacquered MDF sandwich construction plinth
• Isolation feet included

Well Tempered Lab Simplex Turntable
$1,995.

The epitome of William Firebaugh’s creative genius. A stripped-down version of the renowned Amadeus, this new turntable/tonearm combination will set new standards of analog playback in the value-for-money sector.

• “Zero Tolerance” platter bearing
• Servo controlled motor, with vibration controlled mounting
• 0.004” polyester thread belt
• Fully damped tonearm featuring precision made golf ball suspended in silicone fluid for optimum variable damping.
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Isolation feet included
• Acrylic platter
• Single layer wooden plinth

Music Hall MMF-1.3 Turntable
$
  • belt drive
  • electronic speed controlled motor
  • 33 1/3, 45, and 78 rpm
  • aluminum tonearm with
    removable headshell
  • piano black MDF plinth
  • vibration-damping rubber platter mat
  • Audio Technica AT3600L cartridge
    ($50 value)
  • aluminum platter
  • dust cover
  • built-in phono pre-amp
  • removable RCA cables
  • vibration damping feet
Music Hall MMF-1.5 Turntable
$
  • gorgeous real cherry wood veneer
  • built-in phono pre-amplifier which is by-passable if plugging into an existing phono pre-amp
  • S-shaped aluminum tonearm, 9″
  • removable headshell for easy cartridge changing
  • low noise belt-drive design
  • stiff and solid MDF plinth
  • separately isolated DC synchronous motor for superior speed stability
  • three-speed motor provides 33⅓, 45, and 78 rpm
  • properly aligned and mounted Music Hall Melody ($75 value) moving magnet cartridge
  • adjustable electronic speed control
  • special vibration damping feet
  • high quality gold RCA connectors with detachable phono cable included
  • full-size aluminum platter and special vibration damping platter mat
  • worldwide compatibility
  • excellent instruction manual
  • dust cover and 45 rpm adaptor
  • quick and easy to assemble
Nottingham Space 294 Turntable
$5,290.

$3,395.00 Space 294 Table Only

$5,290.00 Space 294 w/ 12″ Ace-Space Arm  

Award winning hand-made turntable, 12″ arm compatible; 14″ alloy platter, oil pumping platter bearing; Leaded bronze arm base and motor pod; PRODUCT OF THE YEAR 2007 The Absolute Sound; Optional graphite Heavy Kit upgrade available.

More Info>>

Nottingham Hyperspace Turntable
$6,590.

$4,495.00 HyperSpace  Table Only
$6,590.00 HyperSpace w/ 10″ Ace-Space Arm  

Hand-made, belt driven, 28 lb. alloy platter; Oil pumping platter bearing; Graphite record mat; Oversize arm base and motor pod; Low torque, low noise synchronous motor.

More Info>>

Nottingham Dais Turntable
$8,695.

$8,695.00 Dais Turntable w/ Wave Mechanic Power Supply   

Hand-made, belt driven, 50 lb. gravity-spun Iron platter; Heavy Duty oil pumping platter bearing; Wave mechanic power supply included; Graphite record mat; Low torque, low noise synchronous motor; optional second arm mount.

More Info>>

Nottingham Anna-Log Turntable
$13,995.

$13,995.00 Anna-Log Turntable Armless   

Handcrafted from “logs” of oak or sapele, the Anna Log is both a joy to listen to and a feast for the eyes as well. This 97 lb. belt driven turntable offers heavy / damped platter, oil pumping platter bearing, low noise, low torque synchronous motor; Recommended arm is the 10″ or 12″ Ace Anna tonearm.

More Info>>

Michell Technodec Turntable
$1,995.

$1,595.00 Technodec w/o Tonearm   

$1,995.00 Technodec  w/ RB202 Tonearm            

The TecnoDec is Michell’s entry level turntable but has the sound quality one would expect from a Michell product, yet at a price 1/3 less than the Gyro SE. The TecnoDec shares a similar vinyl-damped acrylic platter, inverted main bearing and DC motor to that of the Gyro, but dispenses with a sprung subchassis. Isolation feet and a stand-alone motor housing ensure minimal noise pickup. The TecnoDec is so simple to set up, with no complicated adjustments. Comes complete with an outboard DC power supply with internal speed adjustment capability.

Oracle Paris MKV Turntable
$4,100.

Paris Mk V Options

$2,570.00 w/ Regular Power Supply
$3,275.00 w/ Regular Power Supply and Carbon Arm
$3,360.00 w/ Turbo Mk 2 Power Supply
$4,100.00 w/ Turbo Mk2 Power Supply and Carbon Arm   

While re-thinking the new Mk V we felt it was very important to maintain the design signatiure of the original Paris turntable.Everything else is a total redesign! The Oracle mechanical design concepts are always intimately linked to the overlapping of different materials interacting within a same assembly for an optimal control of vibrations and resonances. The Paris Mk V follows that same construction philosophy. Compared with the Delphi MK VI which has a very sophisticated full floating spring suspension and micro vibration stabiliser system, the Paris suspension is very efficient while being much simpler. It has been completely redesigned taking into account the findings that led to the development of the Delphi MK VI. The platter and tonearm are mounted on a semi floating chassis using a suspension made of fibreglass rods and sorbothane rings. The combination of these materials contributes to virtually eliminate the access of unwanted vibrations to the semi floating chassis where the platter, the tone arm and the phono cartridge are interacting.

The Paris tonearm, avaiable as an option, features a micro vibration damping system specially developed by Oracle to eliminate undesirable resonances and vibrations generated within the tonearm itself dued to the interaction of the needle with the disc. The combination of the suspension efficiency coupled with the micro vibration control system provides true isolation from the external environment allowing the stylus to retrieve the most accurate information from the record groove. The Paris is a belt driven turntable and has a low voltage synchronous AC motor. The drive electronics of the Paris has a very high precision oscillator circuit which creates a perfect sine wave signal to feed the motor ensuring high rotational accuracy for optimal speed stability. This system also isolates the drive electronics from line voltage impurities and fluctuations. The above features combined to the choice of materials are the essence of a high performance turntable and together explain the Paris outstanding music reproduction!

Rega P-10 Aphellon Turntable
$9,495.

P-10 Aphellon     $9,495.00
P-10 Apheta 2     $6,695.00
P-10 w/o Cart      $5,495.00

The RP-10 represents the biggest step forward in the evolution of Roy Gandy’s turntable design philosophy.

This extends further than ever before with advanced components built around our radical new plinth design. Featuring the brand new RB2000 tonearm, a ceramic flywheel effect platter and the custom RP10 power supply (allowing total control and accuracy over both motor vibration and speed performance) guarantee the highest level of performance from a Rega turntable to date.

Available with the option of the P10’s perfect partner, the Rega Apheta 2 moving coil cartridge factory fitted (recommended).

Evolution is a well proven and documented process in many areas of our lives. This applies in particular to design engineers and machines. Over the past forty years our cars have become more reliable and economical whilst we take for granted the reliability and speed of modern aircraft. Rega is no exception to evolution. Rega’s experience and previous achievements allow us to continually develop and produce better products.

More Info>>

Well Tempered Lab Versalex Turntable
$4,450.

A multi-layer “Baltic” plywood plinth finished with a walnut veneer top surface. Baltic plywood is dimensionally stable and has a very natural resonance that also results in a natural “EQ” which is excellent for our purpose.

• Symmetrex tone arm configuration
• “Zero Tolerance” platter bearing
• Servo controlled motor with vibration controlled mounting
• 0.004” polyester thread belt
• Fully damped LTD tonearm featuring golf ball suspended in silicone fluid for optimum variable damping
• Easy azimuth adjustment
• Fixed headshell with no fussy setup
• Isolation feet included
• Acrylic platter
• “Baltic” Plywood plinth finished in real walnut

Rega P-6 Turntable
$1,990.

P-6 Exact $1,990.00

P-6 w/o Cartridge $1,495.00

The P6, another multi award winning turntable design, is available in three stunning high gloss piano finishes. Incorporating many advanced features, the RP6 boasts some major advances in platter and motor control technology.

The RP6 features an innovative two piece platter design constructed from float glass, improving speed stability, accuracy and consistency. The inclusion of the RB303 tonearm and our custom TT-PSU offers advanced motor vibration reduction and the convenience of electronic speed change. The option to have the Exact moving magnet cartridge factory fitted is available (recommended). Delivering exceptional performance through clever design and engineering solutions the RP6 provides a welcome addition to any hi-fi system.

 

Michell Gyro SE Turntable
$2,795.

$2,795.00 Gyro SE w/o Tonearm​   

First introduced as the GyroDec in 1980 the Gyro SE is the most popular Michell turntable ever. We like to call it the analog bargain of the century since the Gyro SE gives so much performance, esthetics and quality of construction for so little money. From its heavy cast aluminum chassis, custom graphite/vinyl/acrylic platter with 24K gold-plated centrifugal weights, inverted oil pumping bearing, silent European-made DC motor and speed adjustable power supply, it would be difficult to beat this musical performer at even twice or three times its price. As Neil Young remarked, Steve Jobs was a pioneer of digital music but when he went home he listened to vinyl (on his GyroDec which he purchased in the early 80’s)​

Michell Orbe SE Turntable
$5,995.

$5,995.00 Orbe SE with Never-Connected PSU w/o Arm​   

Based on the ever popular Gyro SE, the Orbe SE is Michell’s flagship turntable. It improves upon the Gyro in a number of areas. It employs a similar European-made DC motor housed in a significantly heavier bronze and aluminum housing, with the addition of a tachometer feedback signal that is sent to the NC Tacho power supply. Using this signal, this larger power supply constantly adjusts the motor speed in real time for rock solid speed stability under varying environmental or loading conditions such as caused by stylus drag for instance. Additionally the NC Tacho power supply uses patented Never Connected circuitry which totally breaks the conduction path from AC mains pollution, preventing unwanted contamination of the DC voltage that is fed to the motor. The sound improvement is stunning. Like the Gyro SE, the massive acrylic platter has most of its weight distributed at its periphery and uses a screw down clamp for more precise clamping of the LP. The cast aluminum chassis is damped with Michell’s DensoDamp compound to reduce ringing. Finally, the Orbe SE rests on a second spider that is de-coupled from the first via three single point contacts.

Rega P-8 Apheta 2 Turntable
$4,195.

P-8 Apheta 2             $4,195.00
P-8 Exact                   $3,490.00
​P-8 w/o Cartridge     $2,995.00

The P8 is a ground breaking turntable which takes Rega’s design philosophy further than ever before. A radical new plinth design using custom materials, the RB808 tonearm , 24v low voltage motor controlled by a customised hand tuned electronic power supply, a triple layer float glass platter and a re-designed and improved version of our Planar 9 precision engineered hub bearing assembly. Available with the option of the RP8’s perfect partner the Rega Apheta moving coil cartridge factory fitted (recommended). These are just some of the features of this amazing turntable designed to extract more music from your vinyl than ever before.

More Info>>

Music Hall MMF-2.3 Turntable
$499.
  • gorgeous high gloss piano black lacquer finish
  • special vibration damping adjustable feet
  • top tier 8.6” carbon fiber tonearm with aluminum headshell
  • low noise fully manual belt-drive design
  • separately isolated DC synchronous motor for superior speed stability
  • two-speed stepped motor pulley for 33⅓ and 45 rpm
  • music hall Spirit moving-magnet cartridge with replaceable
  • elliptical stylus ($100 value)
  • the cartridge supplied is properly aligned and mounted
  • high precision stainless steel and bronze bearing assembly
  • for quiet fluid operation
  • high quality gold RCA connectors with detachable phono cable
  • full-size alloy platter and felt mat
  • excellent instruction manual
  • quick and easy to assemble
  • dust cover and 45 rpm adaptor
Music Hall MMF-5.3 Turntable
$995.
  • ​music hall’s unique dual-plinth construction
  • gorgeous high-gloss piano black lacquer finish
  • top tier 9” carbon fiber tonearm
  • counterweight’s center of gravity is level with the stylus tip,
  • is decoupled from the arm, and acts as a resonance damper
  • DC synchronous motor for superior speed stability,
  • separately isolated on the lower platform
  • two-speed stepped motor pulley for 33⅓ and 45 rpm
  • Ortofon 2M Blue cartridge with replaceable nude
  • elliptical diamond stylus ($236 value)
  • the cartridge supplied is properly aligned and mounted
  • precision stainless steel main bearing sheathed in Teflon®
  • for noise-free fluid operation
  • dynamically balanced alloy platter with soft felt mat
  • screw-on record clamp
  • high quality gold RCA connectors and detachable phono cable
  • special vibration damping adjustable feet
  • built-in round spirit level for proper leveling
  • low noise fully manual belt-drive design
  • excellent instruction manual and easy assembly
  • dust cover and 45 rpm adaptor included
Music Hall MMF-9.3 Turntable
$2,195.
  • music hall’s unique dual plinth construction
  • one-piece full carbon fiber tonearm
  • counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
  • completely isolated/decoupled DC motor with 33⅓ and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
  • motor sits on its own resonance damping puck
  • Optional Ortofon 2M Bronze cartridge with a nude fine line stylus
  • ($440 value)
  • the supplied cartridge is properly aligned and mounted
  • precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
  • non-resonant acrylic platter with metal screw-on record clamp
  • and soft felt mat
  • high quality gold RCA connectors and detachable phono cable
  • adjustable tip toe feet with anti scratch cups
  • low noise fully manual belt drive design
  • built-in round spirit level for proper leveling
  • dust cover and 45rpm adaptor included
  • excellent instruction manual and easy assembly
Music Hall MMF-11.1 Turntable
$4,495.
  • ​music hall’s unique quadruple-plinth design w/sorbothane vibration isolation
  • one-piece Project ‘9cc Evolution’ carbon fiber tonearm
  • the arm uses four hardened Swiss ABEC 7 ball races in an inverted bearing design
  • tonearm is internally wired with flexible wire drawn from high purity copper with only two contact points from cartridge to output connectors
  • counterweight’s center of gravity is level with the stylus tip is decoupled from the arm and acts as a resonance damper
  • fully adjustable azimuth, VTA, and dampened arm lift
  • exclusive microprocessor electronic speed controlled dual motor single flywheel drive system
  • 33 1/3 and 45 rpm speed change at the touch of button
  • motors and flywheel assembly are isolated on mass loaded resonant sink connected to the lower plinth
  • the dual motor flywheel system sits on the left side of the turntable thus eliminating all motor and belt vibration from the cartridge
  • magnetic-levitation adjustable isolation feet
  • inverted ceramic main bearing for super quiet fluid operation
  • thick acrylic platter
  • removable acrylic dustcover
  • high quality, gold RCA connectors with detachable phono cable
  • low noise fully manual belt-drive design, dustcover, 45rpm adaptor
  • ships securely in a substantial wood box
  • excellent instruction manual and easy assembly
Music Hall MMF-7.3 Turntable
$
  • music hall’s unique dual plinth construction
  • one-piece full carbon fiber tonearm
  • counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper
  • completely isolated/decoupled DC motor with 33? and 45 rpm speed controls located in the front left corner of the turntable, thus canceling any potential vibration from the motor/belt to the cartridge
  • motor sits on its own resonance damping puck
  • Optional Ortofon 2M Bronze cartridge with a nude fine line stylus
    ($440 value)
  • the supplied cartridge is properly aligned and mounted
  • precision stainless steel main bearing sheathed in Teflon® for noise-free, fluid operation
  • non-resonant acrylic platter with metal screw-on record clamp
    and soft felt mat
  • high quality gold RCA connectors and detachable phono cable
  • adjustable tip toe feet with anti scratch cups
  • low noise fully manual belt drive design
  • built-in round spirit level for proper leveling
  • dust cover and 45rpm adaptor included
  • excellent instruction manual and easy assembly
Accessories
Grado eGrado
Designed for the portable electronics market, our goal was to create a street-style headphone that will sonically outperform anything available in the affordable portable market. The eGrado is functionally stylish, lightweight and comf... Read More
Rega TT-PSU
The new TT-PSU, housed in our new style case, has a new anti-vibration circuit, output circuit protection and improved power supply regulation. Offering the convenience of electronic speed change, reduced motor noise and increased stabi... Read More
$395.
Okki Nokki
The King of Clean Vinyl Fully automatic European-designed Record Cleaning Machine Cool running turntable allows for hours of use Quiet motor leaves sanity intact Forward and reverse motor for deep ... Read More
$499.
Magnum Dynalab ST-2
This FM Antenna receives distant FM stations from all directions! A more powerful FM Antenna than any single element dipole antenna, the ST-2 vertical antenna is probably one of the best things ever to happen to FM listeners in ur... Read More
$119.
Lyra SPT
(SPT) is a purified water-based, non-alcohol stylus cleaner that helps keep cartridge styli scrupulously clean. In addition to highly purified water, SPT contains only very small amounts of organic chemical cleaning agents. SPT h... Read More
Michell Engineering TecnoWeight​
John Michell, one of audio’s best known and most respected audio engineers, designed this versatile, precision-engineered, geometrically correct counterweight system, suitable for all Rega arms and their various derivatives. This all s... Read More
$179.
Hunt EDA Mk 6
The fibers are in two rows with a static grounding pad centered between. The grounding pad supports the tiny carbon fibers and keeps them erect so they can dig down deep into the groove and extract trapped dust. Look at a record; it cont... Read More
Grado PS 1000e
This hybrid design has an inner sleeve of hand-crafted mahogany made by using the new series ‘e’ curing process. Its outer housing, machined from aluminum then chrome-plated, utilizes a special processing and casting method... Read More
$1695.
Grado PS 500e
​ The PS500e is the younger brother to the PS1000e, with newly redesigned 44mm speaker and the improved 8 conductor cable design and a smaller metal and wood hybrid air chamber. Both the hidden mahogany core and and powder-coated alu... Read More
$595.
Grado RS 2e
The RS2e is the little brother of the RS1e but is just as aesthetically pleasing, now utilizing our proprietary curing process that gives a new, lighter look. The RS2e has a 44mm driver and uses The e Series 8 conductor cable design. ... Read More
$495.
Grado RS 1e
The new RS1e from Grado uses a different species of handcrafted mahogany from our previous models. The earpieces utilize an intricate curing process that optimizes the tonal quality while giving them a new look. The RS1e places a 5... Read More
$695.
Grado SR 325e
The Top of the Range Prestige Series Headphone. The new SR325e has a new driver and cable design. The added mass from the metal housing minimizes transient distortions. With the new 8 conductor cable design you will notice superb co... Read More
$295.
Grado SR 225e
This headphone has sizable rear air flow through a metal screen, while utilizing Grado’s larger ear cushion and closely matched drivers. The result is a broad soundstage free from colorations. The way the SR225e’s new dri... Read More
$200.
Grado SR 80e
Grado has taken one of the world’s most legendary headphones and made it even better. The SR80e has a new driver design, a new polymer to damp resonant distortion in the plastic housing, and a new cable from plug to driver connect... Read More
Grado SR 60e
​ Grado has taken one of the world’s most legendary headphones and made it even better. The SR60e has a new driver design, a new polymer to better damp resonant distortion in the plastic housing, and a new cable from plug to driv... Read More
Shure SFG-2​
Easy to use and inexpensive, this is the most popular stylus force gauge on the market. An indispensable tool for any analog setup. The Shure SFG-2 Stylus Tracking Force Gauge is the industry standard. This simple-to-use measuring devi... Read More
Amplifiers
Rogue Apollo Monoblock​
Elegant and refined, yet brutally powerful, Rogue Audio’s flagship monoblock amplifiers have raised the bar for reference level amplification. The Apollo’s ability to reveal the finest musical details while providing seemingl... Read More
$10,995.
Rogue M-180 Monoblock
Power, Grace, and Precision — when you are ready for the ultimate in vacuum tube amplification, look no further than the Rogue Audio M-180 monoblocks. With 180 Watts of pure tube power, these monoblocks stunningly accomplish the im... Read More
$5,995.
Rogue Stereo 100
Whether your tastes run to the delicate strains of the violin or the wail of the electric guitar, the Rogue Stereo 100 power amplifier will thrill you with its precision, musicality, and impact. And with 100 watts of pure tube power, you... Read More
$3,495.
Rogue Hydra
Imagine a new kind of amplifier that combines the best of both the solid state and tube technologies. An energy efficient “green” design requiring no tube biasing or regular maintenance. An amplifier having the smooth and org... Read More
$2,995.
Rogue Medusa
Imagine a new kind of amplifier that combines the best of both the solid state and tube technologies. An energy efficient “green” design requiring no tube biasing or regular maintenance. An amplifier having the smooth and org... Read More
$3,995.
Rogue Atlas Magnum II
The Atlas Magnum was designed to box outside of its weight class and in that spirit it is truly a world champion. Handily outperforming amplifiers costing many times its price, the Rogue Atlas sets a new standard in affordable tube ampli... Read More
$2,395.
Creek Evolution 100P
POWER OUTPUT >110 Watts into 8 Ohms POWER OUTPUT >170 Watts into 4 Ohms CONTINUOUS CURRENT >8.5 Amps (sine wave) MAX CURRENT > 26 Amps, current burst into 0.5 Ohms OUTPUT IMPEDANCE &... Read More
$1,995.
Creek Evolution 50P
POWER OUTPUT >55 Watts into 8 Ohms POWER OUTPUT >85 Watts into 4 Ohms CONTINUOUS CURRENT >8.5 Amps (sine wave) MAX CURRENT +/- 26 Amps, current burst into 0.5 Ohms OUTPUT IMPEDANCE <0... Read More
$995.
Rogue Apollo Dark Monoblock
In the recent past we have quietly built some very special amplifiers for critical product launches. These amps were built for other audio companies who wanted to showcase their most expensive loudspeakers and components at important eve... Read More
$14,995.
Cables
StraightWire Musicable II IC
Musicable II IC is a favorite for unleashing the potential of digital surround sound receivers, DVD and CD players, music servers, MP3 players, DVRs, subwoofers and other components. Its advanced polypropylene insulatio... Read More
StraightWire SOUNDSTAGE SC Speaker Cable
OUNDSTAGE SC: eclipses competing cables in this class with an eight conductor helix design of OFHC conductors that excels in midrange precision and focused highs; both positioned in a 3-D soundstage. Polypropylene insul... Read More
StraightWire SYMPHONY SC Speaker Cable
SYMPHONY SC combines 8 large conductor groups of 16awg  with Straight Wire’s proprietary Foam TPR Hybrid insulation to achieve remarkable full developed bass, rich midrange and commensurate  upper registers. Sy... Read More
StraightWire OCTAVE II SC Speaker Cable
OCTAVE II features eight CCT (Compressed Conductor Technology)  OFHC copper conductor groupings with advanced foam polypropylene insulation for a significant advance in detail and precision. Compressing each conductor ... Read More
StraightWire Rhapsody SC Speaker Cable
Rhapsody S Advanced Helix design uses the same premium silver plated conductors and advanced foamed polypropylene materials found in the matching Rhapsody S interconnect. Ideal for listeners who prefer crisp yet not edg... Read More
StraightWire Expressivo SC Speaker Cable
Expressivo: a unique, premium bi-wireable speaker cable. It incorporates Compressed Conductor Technology (CCT) with  4 positive “air suspended” conductors at 15AWG of OFHC Copper,  multiple low dielectric ... Read More
StraightWire SERENADE II SC Speaker Cable
SERENADE II SC Advanced Helical design featuring “CCT” (compressed copper technology) conductors and super foamed dual PTFE / polypropylene insulation. Serenade delivers an engaging, full soundstage for true... Read More
StraightWire EXPRESSIVO GRANDE SC Speaker Cable
EXPRESSIVO GRANDE speaker cable is composed of 6 (CCT)  positive “air suspended” conductors at 15AWG of OFHC Copper around a non-conductive, low resonant core. Multiple low dielectric insulations are employ... Read More
StraightWire VIRTUOSO H SC Speaker Cable
VIRTUOSO H speaker cable featuring a unique cable structure, which incorporates the best aspects of our renowned SYMMETRICAL COAXIAL and ADVANCED HELIX designs. Six stranded conductor groups of heavy Silver Plated OFHC ... Read More
StraightWire Chorus II SC Speaker Cable
Chorus II SC Our versatile 12awg / 4 conductor speaker cable enables clear, crist mid and high registers with full, authoritative bass. Featuring Polypropylene insulation and OFHC conductors, Chorus will provide a power... Read More
StraightWire Musicable SC Speaker Cable
Musicable SC helps your speakers reproduce the delicate high frequency range via the use of OFHC (Oxygen Free High Conductivity) conductors and polypropylene insulation in a quad twist. Accurate midrange and vocals tog... Read More
StraightWire Chorus AG IC Interconnect
Chorus AG IC reveals the details in your favorite movies and music to improve your home entertainment experience. Sintered Foam PTFE insulation and silver plated OFC conductors produce great sonic realism and depth. Cho... Read More
StraightWire Symphony II IC Interconnect
Symphony II IC enhances the presentation capabilities of better electronics. Its silky midrange and rich, extended bass retrieval abilities convey all the natural texture of vocals and instruments. It incorporates speci... Read More
StraightWire ​Encore II IC Interconnect
Encore II IC utilizes OFHC conductors with the highest grade of Foam Poly-propylene insulation for uncolored presentation with engaging vocals. Straight Wire’s most advanced Star-Quad design, Encore II, provides ... Read More
StraightWire Rhapsody S IC Interconnect
Rhapsody S IC was developed from a low resistance, helical design foundation employing six conductor groups, Silver coated OFHC copper delivers detailed articulation of all frequencies with luxurious musicality. Foam Po... Read More
StraightWire Expressivo IC Interconnect
Expressivo IC incorporates Compressed Conductor Technology (CCT) with 4  “air suspended” conductors at 21 awg (American Wire Gauge) of compressed OFHC Copper.  Multiple low dielectric insulations optimize?... Read More
StraightWire Serenade II IC Interconnect
Serenade II IC employs Certified CDA 101 copper conductors in a low resistance, advanced Helix CCT (Compressed Conductor Technology) design. It conveys musical structure and dynamic passages with great focus and clarit... Read More
StraightWire Virtuoso R IC Interconnect
Virtuoso R: strikes the captivating balance of articulation and lifelike musical presentation with distinguished coherency and dynamics. Premium individually coated Silver/Copper conductors in an advanced Dual Sy... Read More
StraightWire Crescendo 3 IC Interconnect
Crescendo 3: is a dramatic departure from all existing interconnect designs. No other Straight Wire cable has utilized the advanced field testing and dealer input or undergone such minute refinement. With an advanced he... Read More
StraightWire CRESCENDO 3 SC Speaker Cable
CRESCENDO 3 speaker cable offers technical and sonic advances the over the highly acclaimed original version. The inner core has seven equal diameter TPR hollow tubes vs. one large PE tube. This allows for greater fl... Read More
Cartridges
Charisma Audio Model 103
Cartridge Weight: 8.8 g Cartridge Body: birdseye maple wood Cantilever: ruby Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil... Read More
$750.
Grado The Statement V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 8-70 KHZ CHANNEL SEPARATION: AVERAGE 45 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENSI... Read More
$3,500.
Grado The Reference V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$1,500.
Grado Master V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 10-60 KHZ CHANNEL SEPARATION: AVERAGE 40 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$1,000.
Grado Sonata V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$600.
Grado Platinum V2
OUTPUT: 1mV @ 5 CMV CONTROLLED FREQUENCY RESPONSE: 15-55 KHZ CHANNEL SEPARATION: AVERAGE 30 DB – 10-30 KHZ LOAD: 47,000 OHMS INDUCTANCE: 30 mh RESISTANCE: 72 OHMS NON SENS... Read More
$350.
Dynavector XV-1t​
Type: Low output moving coil cartridge with multi Alnico magnets and the Flux damper Output Voltage: 0.35mV (at 1KHz, 5cm/sec.) Channel Separation: 30 dB (at 1KHz) Channel balance: 1.0 dB (at 1KHz) ... Read More
$9,450.
Dynavector XV-1S
Type Low output moving coil cartridge with Multi alnico magnets and Flux damper Output Voltage 0.3mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Freque... Read More
$5,650.
Dynavector Te Kaitora Rua
Type low output moving coil cartridge with flux damper and alnico magnet Output Voltage  0.26mV (at 1KHz, 5cm/sec.) Channel Separation  30 dB (at 1KHz) Channel balance  1.0 dB (at 1KHz) Freque... Read More
$3,450.
Dynavector XX2 Mk2
Type Low output moving coil cartridge with Alnico magnet and Flux damper Output Voltage 0.28mV (at 1KHz, 5cm/sec.) Channel Separation 30 dB (at 1KHz) Channel balance 1.0 dB (at 1KHz) Frequency re... Read More
$1,995.
Dynavector 17D3
Type  Low output moving coil cartridge with flux damper and softened magnetism Output Voltage  0.3mV (at 1KHz, 5cm/sec.) Channel Separation  25 dB (at 1KHz) Channel balance  1.0 dB (at 1KHz) ... Read More
$1,350.
Dynavector DV-20x2 L or H
Cartridge Weight: 7.1 g Cartridge Body: amboyna burl wood Cantilever: ruby Stylu... Read More
$995.
Dynavector 10x5​
Type  High output moving coil cartridge with flux damper and softened magnetism Output Voltage  2.5mV (at 1KHz, 5cm/sec.) Channel Separation  25 dB (at 1KHz) Channel balance  1.0 dB (at 1KHz) ... Read More
$650.
Charisma Audio Reference One Two
Output Voltage: 0.38 mV at 3.54 cm/sec Coil: Special iron crossed-coil with extremely high purity and ultra fine single crystal copper Cantilever: Ruby Stylus: Super fine line contact nude diamond ... Read More
$2,800.
Charisma Audio Reference One
Cartridge Weight: 7.1 g Cartridge Body: amboyna burl wood Cantilever: ruby Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil w... Read More
$2,200.
Charisma Audio MC-2
Cartridge Weight: 12 g Cantilever: sapphire Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil with single crystal high purity copper... Read More
$1,650.
Charisma Audio MC-1
Cartridge Weight: 12 g Cantilever: titanium alloy Stylus: super fine line contact nude diamond Vertical Tracking Angle: 20 degrees Coil: pure iron crossed-coil with 6N OCC copper Output ... Read More
$1,250.
CD Players
Rega Isis
Discrete Class A operational amplifiers and filters Optimised for sonic performance Low noise, high drive capability and gain bandwidth Careful design of the PCB’s MP3 and WMA media capabilitie... Read More
$9995.
Rega Saturn-R​
New Wolfson WM8742 DAC Enhanced Output amplifier circuit Enhanced Digital power supplies Improved user interface Redeveloped Analogue & Digital outputs Solaris remote with CD, DAC an... Read More
$2995.
Rega Apollo-R​
New Wolfson WM8742 DAC Enhanced Output amplifier circuit Enhanced Digital power supplies Improved user interface Redeveloped Analogue & Digital outputs CD remote with amplifier funct... Read More
$1095.
Oracle CD 2500 Mk VI
Oracle analogue and digital products have always been designed and built as “musical instruments” that can stand the test of time. It is our belief that achieving simplicity in design is a combination of knowledge and common ... Read More
$13720.
Oracle CD 2000 Mk III
Oracle analogue and digital products have always been designed and built as “musical instruments” that can stand the test of time. It is our belief that achieving simplicity in design is a combination of knowledge and common ... Read More
$10180.
Music Hall C-DAC 15.3
24bit/192kHz Burr-Brown PCM 1796 DAC 3 input (optical, coax, usb-b) 24bit/192kHz Wolfson WM8805 DAC brushed aluminum faceplate mid-ship mounted vibration damped CD transport high efficiency toroi... Read More
$549.
Creek Evolution 100CD
DIGITAL INPUTS 2 x SPDIF, 24 Bit 192 kHz, transformer isolated 2 x Toslink, 24 Bit 192 kHz, optically isolated 1 x USB, 24 Bit 192 kHz No additional software drivers are needed for OS X Windows PCs require additional drivers. 1... Read More
$1995.
Creek Evolution 50CD
DIGITAL INPUTS 2 x SPDIF, 24 Bit 192 kHz, transformer isolated 2 x Toslink, 24 Bit 192 kHz, optically isolated 1 x USB class 2 24 bit 192kHz CD TRANSPORT Custom designed, professional quality, CD slot-loader, externally c... Read More
$1495.
Cayin CDT-17 MkII
Serious upgrade to the award winning CDT-17A​ High Definition USB audio design USB2.0 interface accepts 24bit / 192KHz HD signals Class leading high definition digital audio reception circuit V... Read More
$3000.
Rega Isis Valve
Laser Semiconductor Wavelength 780nm Digital sampling frequency 44.1kHz Power Consumption 46w Phono Unbalanced 2.4V source impedance 600 Ohms XLR Balanced 2.4V source impedance 600 Ohms... Read More
$10995.
D/A Converters
Music Hall DAC 15.2
3 digital inputs (usb, optical, coaxial) 1 digital output (coaxial) – converts usb and optical digital input signals to coaxial digital output 1 pair (rca) analog outputs superior Texas Instruments (Bur... Read More
$299.
Music Hall DAC 25.3​
​usb input accepts 24bit/96kHz signal electro-harmonix 6922 tube single-ended (rca) output solid-state differential balanced output ti PCM 1796 24bit/192kHz DAC ti SRC 4192 asynchronous sample ... Read More
$595.
Rega DAC-R
DAC 2x Wolfson WM8742 Frequency Response (100KΩ load) Filter 1 selected Low data rate 44.1/48kHz = 10Hz -0.05dB to (44.1K) 20.02kHz (48K) 21.7kHz -0.03dB Medium data rate 88.2/96kHz = 10Hz -0.05dB to (... Read More
$1195.
Headphone Amplifiers
Creek OBH-21 mk2
The OBH-21mk2 is essentially a very high quality miniature integrated amplifier, designed specifically to drive two pairs of low impedance headphones simultaneously from a line level source, such as a CD player, DAC, or amplifier without... Read More
$595.
Music Hall ​PH 25.2
Marrying a gorgeous sounding tube pre-amp with solid-state amplification has been a technique for achieving unequaled sound quality in high-end component audio since the advent of the transistor.
$399.
Music Hall HA 11.1
The music hall ha11.1 is a high quality low noise stand-alone headphone amplifier intended for use with the majority of headphones available. It is for those who desire the best in sound and performance at an affordable price.
$275.
Lehmann Linear SE USB
The Linear SE satisfies every wish of even the most demanding music lovers. With exquisite components and elegant housing variations it closes up to our award-winning Linear and sets new standards for your music experience. Allow yoursel... Read More
$2,499.
Lehmann Linear SE
The Linear SE satisfies every wish of even the most demanding music lovers. With exquisite components and elegant housing variations it closes up to our award-winning Linear and sets new standards for your music experience. Allow yoursel... Read More
$2,199.
Lehmann Linear
Already since 2004 the Linear has made all common headphones to shine at their very best. Extremely demanding users rely on our top model, from the West German Broadcasting Corporation to the audiophile TACET label to Sennheiser’s and ... Read More
$1,119.
Lehmann Traveller
The Traveller sets a new standard in the league of mobile headphone amplifiers. We have designed it for a generation who is constantly on the move: no matter if at home, in the office or when travelling – this elegant companion will al... Read More
$599.
Lehmann Rhinelander
Despite all the down-to-earthness of an entry-level model – this ambitious headphone amplifier will open up a whole new world of musical enjoyment to you. The Rhinelander stands fully in the high-end tradition of the Lehmannaudio produ... Read More
$529.
Lehmann Studio Cube​
Our StudioCube is the ideal partner for the personal monitoring: it enables a nuanced, transparent and fatigueless listening in the studio and on stage. At the same time this compact headphone amplifier fascinates the most demanding musi... Read More
$499.
Rega EAR
Developed by our engineers, the new Ear benefits from a completely new surface mount PCB layout based on the hugely successful Brio-R amplifier. Exceptional performance is guaranteed with the convenience of independent mute, volume cont... Read More
$395.
Integrated Amplifiers
Rogue Cronus Magnum II
The award winning Cronus Magnum has garnered an enviable reputation in the high end audio world. Even at its attainable price, it outperforms other integrated amps costing many times more. The pure tube design provides a smooth, almost l... Read More
$2,495.
Rogue Sphinx v2
Dynamic, transparent, and profoundly musical, the Rogue Sphinx sets a new standard in affordable integrated amplifiers. Utilizing sophisticated circuitry borrowed from our most advanced designs, the Sphinx is able to outperform separates... Read More
$1,395.
Rega ​Osiris
The Osiris is the culmination of 32 years’ experience in solid-state amplifier development. A no compromise, super high performance, 162 Watts into 8 Ohms (250 Watt 4 Ohms), dual mono amplifier housed in a custom Rega CNC machined alum... Read More
$9,995.
Rega Elex-R
The Elicit-R has been designed and engineered to the highest standard. The Elicit-R will deliver the best possible audio performance whilst remaining simple to use and easy to setup. Our recent development work in amplifier design circ... Read More
$2,995.
Rega Brio 2017​
The Brio has a completely new case to house its improved circuits and parts. It now sits in a fully aluminium two-part case which boosts the Brio’s heat sinking capabilities and improves on Rega’s already solid build quality and reli... Read More
$995.
Music Hall A 30.3
125 watt/ch stereo amp ultra quiet preamp section with gold plated inputs high qrade no-short speaker binding posts for A & B speakers direct AV (home theater bypass) input CD, Tuner, Aux, iP... Read More
$999.
Music Hall A 15.3​
high-current 50 watt/ch amplifier ultra low noise pre-amplifier section brushed aluminum face plate gold plated heavy gauge speaker binding posts 5 x analog stereo gold plated inputs 1 x... Read More
Creek Evolution EVO 100A
To maintain a family resemblance with the lower powered amplifier, the EVOLUTION 100A is housed in a similar slim case with engraved front panel and solid metal control knobs as the EVOLUTION 50A. It is available with either a Black o... Read More
$2,195.
Creek Evolution EVO 50A V2​
This new amplifier forms part of the next generation EVOLUTION 50 range of products. Housed in a slim case with engraved front panel and solid control knobs, it’s finished in either black or silver brushed aluminium. An ingenio... Read More
$1,195.
Cayin A-88T
The A-88T is another incredible hand-crafted tube amplifier by Cayin with remarkable capabilities. The MK3 version further improves upon its predecessor’s rich, full sound quality. Four EL34 or KT88 tube components are used ... Read More
$3,500.
Cayin CS-55A
The CS-55A is the most recent advancement in tube amplifier technology created by Cayin. This state-of-the-art machine boasts forty watts per channel by using 4 KT88 tubes in Class AB ultra-linear push pull amplification. The CS-55A cons... Read More
$2,500.
Cayin A-50TP-Phono
The Cayin A-50T immediately attracts listeners with its rare, natural, and fluid sound. These qualities, paired with immaculate processing, make the new Cayin amplifier without competition in its price range. The A-50T contains fo... Read More
$1,800.
Cayin A-50TP
The Cayin A-50T immediately attracts listeners with its rare, natural, and fluid sound. These qualities, paired with immaculate processing, make the new Cayin amplifier without competition in its price range. The A-50T contains fo... Read More
$1,500.
Rogue ​Pharaoh​
When we began development of the Pharaoh amplifier we had one overarching goal: The realization of an integrated amplifier that, without compromise, would offer the performance of the finest separates. To that end, the Pharaoh uniquely c... Read More
$3,495.
Loudspeakers
Rega RX-5
The Rega RX-FIVE loudspeaker system delivers  balance, detail and dynamics thanks to a unique handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at t... Read More
$2995.
ProAc Response DB1
Small mini monitor type loudspeakers have become very popular for those wishing for a high quality sound with a minimal visual effect. Although the mini monitor type speaker can be quite accurate and indeed sound better than many ... Read More
$3200.
ProAc Tablette Anniversary
The original ProAc Tablette was launched 30 years ago to instant critical acclaim and redefined performance in mini-monitor class loudspeakers at that time. There have been nine incarnations of the Tablette to date and each one has seen ... Read More
$2400.
ProAc Tablette 10
The new ProAc Tablette 10 is a tenth generation of the Tablettes launched in 1979.  The Tablette 10 is an all new design, using a thin walled heavy damped infinite baffle enclosure which is the same as the BBC LS3/5a.  This design allo... Read More
$1900.
Epos K3
The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 ½ way K3 floor-standing loudspeaker is the largest model within this range of loudspeakers. The initial concept started out with a thought abou... Read More
$2395.
Epos K2
The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 ½ way K2 floor-standing loudspeaker is the second largest model within this range of loudspeakers. The initial concept started out with a thoug... Read More
$1750.
Epos K1
The K-Series marks the beginning of a new era for Epos. Designed by Luke Creek, the 2 way K1 stand-mount loudspeaker is the largest stand-mount model within this range of loudspeakers. The initial concept started out with a thou... Read More
$795.
Epos K5
The K-Series marks the beginning of a new era for Epos. The 2-way K5  stand-mount loudspeaker is the entry-level model within this range of loudspeakers. The K5 surpasses expectations in its ability to deliver a wide soundstage and de... Read More
$495.
Dynaudio Evidence Temptation
At the heart of the timeless elegance of the Temptation lies the Evidence technology concept, housed in an alluring slim cabinet. It makes it possible to achieve sonic perfection while offering optimal integration into any living room.... Read More
$30000.
ProAc Response D2
For many years the Response 1SC has been one of the world’s leading mini monitors but now the D1 has stolen its crown. High tech improvements have been made to the cabinet, bass driver, and crossover network. The cabinet baf... Read More
$3400.
ProAc Response D20R
The Response D18 has proven to be one of ProAc’s most successful loudspeakers receiving critical worldwide acclaim. However, the D18 is only available with a dome tweeter, so to satisfy demand for people wanting a ribbon tweeter Pr... Read More
$4900.
Rega RX-3
The Rega RX-THREE loudspeaker system delivers balance, detail and dynamics thanks to a unique  handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at ... Read More
$1995.
Rega RX-1
The Rega RX-ONE loudspeaker system delivers balance, detail and dynamics thanks to a unique handmade set of Rega designed drivers and crossovers.The newly developed DX-125 bass mid-range driver (using a doped  paper cone) is at the hear... Read More
$1295.
ProAc Studio 148
ProAc’s latest the studio 148 is a narrow columnar design with a stabilising plinth and bass port pre-drilled for adjustable spikes. The beautiful and real wood veneers are impeccable making it suitable for all types of room design... Read More
$3600.
ProAc Studio 118​
The new studio 118 is a new stand mounting design. It comes in a variety of real wood veneers and the sound quality belies the size of the enclosure. The 118 has a new bass driver, with a great deal of research into cone materials... Read More
$2200.
ProAc K8
The ProAc K6 is one of our most successful designs and the plans to make a larger K8 have finally come to fruition. The K8 uses a larger 8 inch bass driver than the K6, the cone is made from Kevlar weave material, then polished an... Read More
$39500.
ProAc K6
ProAc is proud to announce the launch of the K6 loudspeaker. Following the successful incorporation of carbon fibre cone technology in the Carbon Pro Series, ProAc have been researching other materials for possible inclusion in th... Read More
$22000.
ProAc Response D48R
After a year in research and development the D48 is now ready for production. Areas of improvement have been mid-range detail and a cleaner, faster and more extended bass response. A new studio monitor quality bass driver was desi... Read More
$10900.
ProAc Response D30RS
​ProAc have updated the D30 to a D30S.  Still available in a dome or ribbon tweeter – Response D30DS and D30RS respectively ProAc have developed a new bass driver using a cone similar to that used in our Response D48, the... Read More
$7800.
Dynaudio Evidence Platinum
Before we start, we just want to say this: Evidence isn’t a ‘luxury’ speaker. It doesn’t have gold-plated screws or endangered wood inlays, and it doesn’t make boastful (and meaningless) claims about the ethereal nature of soun... Read More
$49200.
Dynaudio Evidence Master​
The Evidence Master is comprised of three individual interlocking sections. The technically identical upper and lower cabinet sections house the bass drive units, while the middle section contains the midrange and treble drive units as w... Read More
$69000.
Dali Zensor 7
Standing 97.8 cm, the flagship model of the series is both noticeable and contemporarily becoming in its high-gloss lacquered finish. If you really need the full blown sonic experience in a mid to large sized room at an affordable level,... Read More
$1195.
Dali ​Rubicon 2
The RUBICON 2 stand speaker is the perfect blend between compact size and large sound performance. With the solid MDF cabinet, the RUBICON 2 has a perfect working environment for its ultra-light 29 mm soft dome tweeter, 6.5 inch wood fib... Read More
$2995.
Dali ​Epicon 8
The absolute pinnacle of the EPICON series, the EPICON 8 delivers dramatically rich and detailed sound that will blow your mind and captivate your senses. The loudspeaker is the result of a passionate, tireless quest to reach perfection.... Read More
$19995.
Dali ​Epicon 6
The EPICON 6 is no less that DALI’s new reference loudspeaker. Standing on the shoulders of virtues from the acclaimed EUPHONIA series, EPICON takes you one step closer to “the real thing”. The backbone of EPICON... Read More
$13995.
Dali ​Epicon 2
The two channel speaker features a 6 ½“ bass driver and a soft cone dome tweeter. In fact, the technological breakthroughs designed for the larger EPICON 6 and EPICON 8 models have been channelled into EPICON 2 to create a speaker... Read More
$7990.
Canalis Allegra 2.0
The Allegra 2.0 is our flagship speaker. Designed around the Anima, it is our inspiration for the CS products. To... Read More
$17500.
Canalis Amerigo 2.0
The elegantly proportioned, three-way floorstanding Amerigo introduces design innovations that are unique to this loudspeaker, including the aptly-named Air Drive bass-loading enclosure for extended low-frequency response and improved ef... Read More
$10000.
Canalis Cambria
The Cambria is the latest design to come from Joachim Gerhard, and it challenges a few rules in loudspeaker design. Not that we’re trying to be tricky. It’s just that when advancements in technology happen, they can open doors that w... Read More
$5500.
Canalis Anima CS
The Anima CS takes the Anima two-way monitor’s superlative performance up another level. The improvements? An overall reduction in the noise level of the speaker, higher resolution, and improved dynamics. And what did we do to get ... Read More
$6000.
Dali ​Rubicon 6
The cone used in the RUBICON series draws upon the heritage from the EPICON technologies, and has a light, rigid and randomly uneven structure. This lower the complexity of the central part of the motor, ensures even piston like movement... Read More
$5995.
Dali Rubicon 8​
Assembled in-house, every driver in each of the RUBCION models are configured to match the model they are destined for. The three 6½ inch drivers used in RUBICON 8 all work together to reproduce a clean, detailed sound with no colourati... Read More
$7995.
Dali Zensor 5
Today, we expect that little extra care and attention, when it comes to performance, visual appearance, and details. The ZENSOR 5 comes up to these expectations. The ZENSOR 5 front baffle features the exclusive ZENSOR high-gloss l... Read More
Dali Zensor 3
DALI ZENSOR 3 is the newest member of the award winning ZENSOR series. This brand new speaker is developed and built to sound much larger than it actually is. Using a 7” woofer based on the technology from the ZENSOR 7 and the tweete... Read More
$595.
Dali Zensor 1
Making sense! That’s what ZENSOR 1 is up to, packing as much legacy and music as possible into a slim and compact cabinet that you can carry home under your arm.
$395.
Dali Opticon 8
The OPTICON 8 is the pinnacle of the range. A towering floor-stander blessed with the best in DALI’s cutting-edge technology. If you want to move air with the ultimate in power and precision, the 8 is your answer. With a capacio... Read More
$3795.
Dali Opticon 6
Standing a metre high and capable of seriously sonorous sounds, the DALI OPTICON 6 is a master of music that delivers thunderous bass and perfectly pitched mids and highs in unequalled equilibrium. OPTICON 6 has all the virtues of... Read More
$2495.
Dali Opticon 5
The DALI OPTICON 5 is the first of the floor-standing options of the OPTICON range. An exceptional stylish performance powerhouse thanks to the inclusion of our sensational 6½ inch low-loss Wood Fibre Woofer working in seamless conjunct... Read More
$1995.
Dali Opticon 2
The DALI OPTICON 2 is our second compact stand-mount option that builds upon the power of the OPTICON 1 with a sizeable 6½ inch low-loss Wood Fibre Woofer and a 28 mm ultra-light Soft Dome Tweeter to make it musically meatier and brin... Read More
$1295.
Dali Opticon 1
Small but perfectly formed, the DALI OPTICON 1 stand-mount speaker is curiously capacious with a compact cabinet that, despite its dimensions, holds almost five litres of air allowing for greater sympathetic resonance and adding to the p... Read More
$995.
Canalis Anima
The Anima is our most popular loudspeaker. This two-way, compact monitor-style speaker has been an audiophile standard for decades, thanks to its ability to present music in a coherent fashion, tonally and spatially. Designing a t... Read More
$3250.
Phono Preamplifiers
Rega Fono MC
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading ... Read More
$450.
Lehmann Silver Cube
Sensitivity for output level 775 mV/0 dBu (with activated high gain switch) Gain 1 kHz Maximum input level 1 kHz Signal to noise ratio (RMS unweighted) MM: 3.8 mV/1 kHz; MC: 0.38 mV/1 kHz MM: 46 ... Read More
$4,500.
Music Hall Mini​
​RIAA equalization +/- 1.5 dB, 20Hz to 20kHz i/o connectors: rca, 3.5mm trs stereo input sensitivity: 35 dB gain @1kHz, 47k Ohms Input Z input capacitance: 5pf + cable capacitance input impedan... Read More
Music Hall PA 1.2
gain mm/mc 40dB / 60 dB input sensitivity mm/mc 5mV/1kHz / 0.45mV/1kHz input impedance mm/mc 47Kohms/120pF / 100 ohms/120pF output voltage typically mm/mc 300mV@1kHz � 3mV / 0.3mV to... Read More
$175.
Oracle Paris PH 100​ Mk II
The Paris PH100 is a versatile phono stage that can accommodate usage of any moving magnet or moving coil phono cartridges.  Indeed the PH 100 offers variable moving coil cartridge input impedance settings and variable gain using differ... Read More
$765.
Oracle Paris PH 200 Mk II​
The Paris PH100 is a versatile phono stage that can accommodate usage of any moving magnet or moving coil phono cartridges.  Indeed the PH 100 offers variable moving coil cartridge input impedance settings and variable gain using differ... Read More
$1,595.
Rega Fono Mini A2D​
The Rega Fono Mini A2D is a high quality phono pre-amplifier for use with any moving magnet cartridge. The addition of USB interface allows you to easily transfer vinyl to your PC. The Fono Mini A2D is designed to amplify the signal from... Read More
$175.
Rega Fono MC
The Fono MC is an exceptionally high quality MC phono stage designed to maximise the potential of any MC cartridge. Although specifically to compliment the latest Rega range of  moving coils you will find full adjustability for loading ... Read More
$450.
Rega Aria
The Aria is an “all analogue amplifier” with no digital control circuitry. The fully aluminium case screens the internal circuit from any stray RFI signals. Our designers have avoided including any superfluous gadgets as they... Read More
$1,495.
Rogue Audio Triton
– Moving magnet (mm) or Moving coil (mc) operation – High performance solid state circuit topology – Three stages of amplification for ultra low noise – Precise RIAA equalization +/- 0.1 dB 20-20... Read More
$995.
Lehmann Decade
​Input Stage: Dual mono Microphone preamp Chip newest generation Gain settings: 36 dB, 46 dB, 56 dB, 66 dB Max. gain : 66 dB Internal impedances (selectable): 47 k, 1 k, 100 R Onboard slot for ... Read More
$2,099.
Lehmann Black Cube SE II
​Input Stage: Dual mono Microphone preamp Chip newest generation Gain settings: 36 dB, 46 dB, 56 dB, 66 dB Max. gain: 66 dB Internal impedances (selectable): 47 k, 1 k, 100 R Onboard slot for c... Read More
$1,149.
Bellari VP 130
The VP130 is a well designed RIAA phono preamplifier made to equalized phono signal to a line-level signal, and is intended for magnetic pickups. Since the unit utilizes tube circuitry, the resulting output signal is more warm and musica... Read More
$275.
Bellari VP 530
The vp530 is a usb/tube phono preamp for use with moving-magnet and high output moving-coil cartridges. It includes a built in headphone amplifier, Burr-Brown A2D converter w/usb output, and RIAA curve/flat EQ. The vp530 is designed to a... Read More
$399.
Creek OBH-15mk2
The OBH-15 mk2 has a completely new circuit design, with a discrete transistor MC and integrated circuit MM stage. Unlike its predecessor, the new amp has multiple gain settings and matching capabilities for capacitance and resistance. T... Read More
$595.
Dynavector P-75 Mk3
Phono to line level preamplifier Total phono solution Matches any cartridge type Fully user adjustable Very low noise Very high RIAA accuracy No hum! Includes patented ... Read More
$895.
Lehmann Black Cube Statement​
Selectable gain: 31dB, 41dB, 51dB, 61dB Input impedance: selectable 47k, 1000 or 100 ohms Free slot for custom impedance load Input capacitance: 100pF Passive RIAA-filter with high performance MK... Read More
$449.
Lehmann Black Cube Original​
​Input Stage Dual mono Microphone preamp Chip newest generation Gain settings 36 dB, 46 dB, 56 dB, 66 dB Max. gain 66 dB Internal impedances (selectable) 47 k, 1 k, 100 R Onboard slot for custo... Read More
$629.
Lehmann Black Cube SE
30VA (=10x Black Cube) high-current toroidal transformer with protection coil Only top notch electronic parts Ultra fast recovery-rectifying diodes Advanced series voltage regulation stage Output... Read More
$929.
Rogue Audio Triton Tube
– Compatible with almost all low,medium and high output moving coil (mc) and Moving magnet (mm) cartridges. – Pure tube circuit topology – Precise RIAA equalization – Custom Cinemag step... Read More
$995.
Preamplifiers
Rogue RP-7
With a perfect blend of tube smoothness and an almost unbelievable level of detail and transparency, the new RP-7 essentially redefines what a reference level tube preamplifier can achieve. The RP-7 is our first balanced preamplif... Read More
$4,995.
Rogue RP-1
Elegantly simple yet technically sophisticated, the RP-1 is our latest tube preamplifier based on the innovative RP-X platform. Stunning in both performance and design, the RP-1 provides all of the features you need for a truly high end ... Read More
$1,695.
Rogue RP-5​
The RP-5 is our first preamplifier based on the groundbreaking new RP-X platform. Silky smooth yet extraordinarily high tech, the RP-5 sets a new benchmark in performance and functionality. Utilizing four 12AU7 tubes in a mu-follower con... Read More
$3,495.
Receivers
Magnum Dynalab MD 301
When developing the Hybrid-Acoustic Circuitry that we first introduced in our MD 309, we knew we were onto something. In the 2-channel audio landscape, there was always a separation between those who favored the precision and sharp detai... Read More
$3000.
Magnum Dynalab MD 306
The 2nd introduction in our series of Hybrid Integrated Amplifiers, the MD 306 is another serious solution for the 2-channel audio enthusiast. With the same proven Hybrid-Acoustic circuitry found in all of our integrated amplifiers and r... Read More
$4500.
Magnum Dynalab MD 307
The 3rd product to feature our in-house designed Hybrid-Acoustic circuitry, the MD 307 Hybrid Integrated Amplifier is, on the inside, a twin brother to the widely acclaimed MD 309 Hybrid Integrated Amplifier. Only the faceplate design a... Read More
$5500.
Magnum Dynalab MD 209
From our pedigree in pure analog circuitry, we’re proud to introduce our most uncompromising 2 channel Audio Receiver. Loaded with features, and stocked with Magnum Dynalab’s unrelenting build quality and audio engineering, t... Read More
$5500.
Magnum Dynalab MD 309
MD 309 Integrated Amplifier: from our pedigree in pure analog circuitry, we’re proud to introduce our most uncompromising 2-channel Integrated Amplifier. Using the same Hybrid-Acoustic CircuitryTM found in our MD-209 Audio Receive... Read More
$7500.
Tonearms
Dynavector DV507 Mk2 Tonearm
The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984.... Read More
$5,450.
Ortofon AS-309S Tonearm
  Effective mass (without headshell): 4.0 g Effective length (distance between the stylus and pivot point): 329mm Mounting distance between the pivot point and turntable center: 314mm Offset a... Read More
$2,225.
Ortofon RS-212D Tonearm
  ​Effective mass (without headshell): 3.5 g Effective length (distance between the stylus and pivot point): 231mm​ Mounting distance between the pivot point and turntable c... Read More
$3,359.
Ortofon RS-309D Tonearm
Dynamic balance graduated vertical tracking force (VTF) control through a new spring design • The new short wire spring, housed in the pivot case, eliminates unwanted vibrations in the tone arm • VTF in the range 0-5 gram... Read More
$3,569
Rega RB-220 Tonearm
The latest design takes full advantage of our brand new arm tube and the current three point arm mounting system. Each RB220 is meticulously hand assembled, creating a precision crafted tonearm achieving extremely low friction levels an... Read More
$395.
Rega RB-330 Tonearm
Our team have worked tirelessly to improve every aspect of this new tonearm. Offering improved ergonomics, usability and sonic performance. Featuring a new bias assembly, re-designed stiffer vertical bearing housing, integrated... Read More
$595.
Rega RB-808 Tonearm
The RB808 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms each one is meticulously hand built by a team of highly skilled technicians. The RB808 has improved bearings and a tightene... Read More
$1,195
Rega RB-2000 Tonearm
The RB2000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand built by a team of highly skilled technicians. The RB2000 uses improved bearings with each ... Read More
$2,195.
Wilson Benesch ACT 25 Tonearm
The new A.C.T. 25 builds upon a Wilson Benesch’s the illustrious history of the Analogue Collection. With the exception of Wilson Benesch’s own reference level, Nanotube One – the new A.C.T. 25 Tonearm is the world’s light... Read More
$3,495.
Ortofon AS-212S Tonearm
  Effective mass (without headshell): 3.5 g Effective length (distance between the stylus and pivot point): 231mm Mounting distance between the pivot point and turntable center): 216mm Offset ... Read More
$2,099.
Ortofon TA-210 Tonearm
  TA-210 is a static balanced gimbal type arm, easy to use and adjust for optimal VTF settings TA-210 has a standard 5-pin DIN connector for tonearm cable The tonearm geometry allows for a Baerwald a... Read More
$1,994
Nottingham Ace-Space Tonearm
$1,595 Ace-Space​ 10″            $1,895 Ace-Space​ 12″... Read More
$1,895.
Nottingham Ace-Anna Tonearm
$3,295 Ace- Anna 10″ $3,695 Ace- Anna 12″ The Ace Anna Arm design uses side stabilizer bars and tiny ball bearing chases to maintain azimuth. Nottingham Analogue have also deve... Read More
$3,695.
Nottingham Interspace Tonearm
Basic Nottingham Analogue turntable arm of simplified construction (no vertical height adjustment screws to facilitate arm). Length of 10 inches. The design of the suspension unipivot-locked. The beam of carbon fiber. Distance Mounting &... Read More
$995.
Oracle SME V Tonearm
SME engineers, recognising the potential of the latest complementary equipment, accepted the challenge to design and build a pick-up arm which unlike others in existence would make no detectable sound contribution of its own. The work to... Read More
$7,250.
Oracle SME 345 Tonearm
SME engineers, recognising the potential of the latest complementary equipment, accepted the challenge to design and build a pick-up arm which unlike others in existence would make no detectable sound contribution of its own. The work to... Read More
$3,600.
Oracle Paris Tonearm
The Oracle Paris tonearm is a Pro-Ject 9cc tonearm that has had its performance greatly enhanced by the addition of a vibration and resonance control system. This collaboration with Pro-ject comes from the long time friendship of Jacques... Read More
$1,050.
Ortofon TA-110 Tonearm
  TA-110 is a static balance gimbal type arm, easy to use and adjust for optimal VTF settings TA-110 has a standard 5-pin DIN connector for tonearm cable The tonearm geometry allows for a Baerwald al... Read More
$1,679
Wilson Benesch Nanotube One Tonearm
As the world’s leading authority and pioneer of the use of carbon fibre technology in audio structures Wilson Benesch is delighted to announce, the latest results of its on going research and development. There are three key fac... Read More
$4,900.
Tuners
Magnum Dynalab MD 90 T SE
Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-a... Read More
$2275.
Magnum Dynalab MD 807
When creating a line of INTERNET MEDIA TUNERS worthy of inclusion in any high-performance audio system, we wanted to build not only world-leading products, but also a flexible line-up. Boasting the same functionality found in our MD 809 ... Read More
$4500.
Magnum Dynalab MD 806
The 2nd introduction in our line-up of INTERNET MEDIA TUNERS , the MD 806 brings years of expertise in analog sound staging, our proven development in D-to-A conversion technology, and innovative new software to unlock a near limitless a... Read More
$2700.
Magnum Dynalab MD 801
Our line of INTERNET MEDIA TUNERS starts with the MD 801, but this product is far from entry-level. It is, like our long-standing line of FM tuners, worthy of inclusion in any high-performance home audio system, and even whole-house inst... Read More
$1600.
Magnum Dynalab MD 109 T
Primary highlights include an ultra stable power supply, a direct output Triode audio section and most importantly, the introduction of the World Source PlatformTM. The World Source PlatformTM represents the culmination of 2 year... Read More
$10080.
Magnum Dynalab MD 108 T
The predecessor and backbone of the new MD 108T Triode Tube FM Tuner, the MD 108, is one of the most successful standalone FM tuners we have ever introduced. It has been a staple of the Magnum Dynalab collection for over 10 years and the... Read More
$7500.
Magnum Dynalab MD 107 T
New for 2010, the MD 107 FM Tuner is a worthy replacement of one of our long-standing flagship products, the MD 106T. Now standard on many of our high-performance tuners, the MD 107 uses two 6922 MD Triodes in the audio amplification sta... Read More
$4500.
Magnum Dynalab MD 105
Another new FM tuner for 2010, the MD 105T is built off the platform of our now discontinued MD 102T FM tuner, with a selection of component upgrades throughout the unit. Built with RF components that are produced to even tighter toleran... Read More
$3000.
Magnum Dynalab MD 105 T
Another new FM tuner for 2010, the MD 105T is built off the platform of our now discontinued MD 102T FM tuner, with a selection of component upgrades throughout the unit. Built with RF components that are produced to even tighter toleran... Read More
$3600.
Magnum Dynalab MD 90
Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-a... Read More
$1400.
Magnum Dynalab MD 90 SE
Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-a... Read More
$1775.
Magnum Dynalab MD 90 T
Developed to co-exist with the MD 90, the MD 90TSE is also a successor to the FT101A, one of the most sensitive, selective and sonically accurate FM tuners of our time. The MD 90TSE continues the tradition by re-defining state-of-the-a... Read More
$1785.
Magnum Dynalab MD 809
I ​n developing our new line of Internet Radio Tuners (Wifi Tuners), we first gave consideration to how we have created certain products that have stood out from the landscape of hi-fi audio equipment. The timeless Etude FM Tuner launc... Read More
$8000.
Turntables
Music Hall USB-1 Turntable
​extremely quiet belt drive, 2-speed turntable aluminum die-cast platter 33 1/3 and 45 rpm playback speeds ... Read More
$249.
Nottingham Ace Spacedeck Turntable
 $2,895.00 Ace-Spacedeck Table Only ... Read More
$4,490.
Nottingham Interspace Jr Turntable
$2,495.00 Interspace Jr. w/ Interspace Arm    Hand-made, belt driven, motor-in-plinth design; 9″ Ace Interspace carbon fibre, unipivot arm included. Shares the same classic, heavy alloy platter of the “Space... Read More
$2,495.
Music Hall ikura Turntable
music hall’s unique split-plinth design gorgeous high gloss white or black finish ... Read More
Oracle Origine Turntable
$1,880.00 Origine w/ Origine Arm   Specifications: Drive: AC synchronous outboard motor, belt driven, external power supply. Platter: One-piece acrylic platter derived from the Paris MkV. Tone... Read More
$1,880
Oracle Delphi Mk VI Turntable
Delphi Mk VI Options $8,300.00 w/ Regular Power Supply​ $8,850.00 w/ Regular Power Supply and Dustcover $9,150.00 w/ Turbo Mk 2 Power Supply $9,700.00 w/ Turbo Mk 2 Power Supply and Du... Read More
$9,700.
Rega P3 Turntable
$1,145.00 Planar 3 Elys $945.00 Planar 3 w/o Cartridge      Replacing the multi award winning and five times What Hi-Fi? Product of the Year (RP3) was never going to be an easy task... Read More
$1,145.
Rega P2 Turntable
$675.00 Planar 2     The new Planar 2 was developed over the past two years alongside the recently released Planar 3. Featuring the brand new RB220 tonearm which is packed with groundbreaking new features. A ... Read More
$675.
Rega P1 Turntable
 $475.00 Planar 1 The new Planar 1 is the most user friendly Rega turntable to date. Now with preset bias force on the brand new RB110 tonearm, the Planar 1 is set up in seconds after unpacking. Simply slide the balanc... Read More
$475.
Well Tempered Lab Amadeus Mk II Turntable
The Amadeus was our first and original design that featured the now quite famous and innovative “golf ball” tone arm. The MKII version has the same dual layer MDF plinth and acrylic platter along with our recently developed Symmetrex... Read More
$2,850.
Well Tempered Lab Simplex Turntable
The epitome of William Firebaugh’s creative genius. A stripped-down version of the renowned Amadeus, this new turntable/tonearm combination will set new standards of analog playback in the value-for-money sector. • “Zero Tol... Read More
$1,995.
Music Hall MMF-1.3 Turntable
belt drive electronic speed controlled motor 33 1/3, 45, and 78 rpm aluminum tonearm with removable hea... Read More
Music Hall MMF-1.5 Turntable
gorgeous real cherry wood veneer built-in phono pre-amplifier which is by-passable if plugging into an existing phono pre-amp S-shaped al... Read More
Nottingham Space 294 Turntable
$3,395.00 Space 294 Table Only $5,290.00 Space 294 w/ 12″ Ace-Space Arm   Award winning hand-made turntable, 12″ arm compatible; 14″ alloy platter, oil pumping platter bearin... Read More
$5,290.
Nottingham Hyperspace Turntable
$4,495.00 HyperSpace  Table Only $6,590.00 HyperSpace w/ 10″ Ace-Space Arm   Hand-made, belt driven, 28 lb. alloy platter; Oil pumping platter bearing; Graphite record mat; Overs... Read More
$6,590.
Nottingham Dais Turntable
$8,695.00 Dais Turntable w/ Wave Mechanic Power Supply    Hand-made, belt driven, 50 lb. gravity-spun Iron platter; Heavy Duty oil pumping platter bearing; Wave mechanic power supply included; Graphite record ma... Read More
$8,695.
Nottingham Anna-Log Turntable
$13,995.00 Anna-Log Turntable Armless    Handcrafted from “logs” of oak or sapele, the Anna Log is both a joy to listen to and a feast for the eyes as well. This 97 lb. belt driven turntable offers heavy / ... Read More
$13,995.
Michell Technodec Turntable
$1,595.00 Technodec w/o Tonearm    $1,995.00 Technodec  w/ RB202 Tonearm             The TecnoDec is Michell’s entry level turntable but has the sound quality one would expect f... Read More
$1,995.
Oracle Paris MKV Turntable
Paris Mk V Options $2,570.00 w/ Regular Power Supply $3,275.00 w/ Regular Power Supply and Carbon Arm $3,360.00 w/ Turbo Mk 2 Power Supply $4,100.00 w/ Turbo Mk2 Power Supply and Carbon ... Read More
$4,100.
Rega P-10 Aphellon Turntable
P-10 Aphellon     $9,495.00 P-10 Apheta 2     $6,695.00 P-10 w/o Cart      $5,495.00 The RP-10 represents the biggest step forward in the evolution of Roy Gandy... Read More
$9,495.
Well Tempered Lab Versalex Turntable
A multi-layer “Baltic” plywood plinth finished with a walnut veneer top surface. Baltic plywood is dimensionally stable and has a very natural resonance that also results in a natural “EQ” which is excellent for our purpose. ... Read More
$4,450.
Rega P-6 Turntable
P-6 Exact $1,990.00 P-6 w/o Cartridge $1,495.00 The P6, another multi award winning turntable design, is available in three stunning high gloss piano finishes. Incorporating many advanced ... Read More
$1,990.
Michell Gyro SE Turntable
$2,795.00 Gyro SE w/o Tonearm​    First introduced as the GyroDec in 1980 the Gyro SE is the most popular Michell turntable ever. We like to call it the analog bargain of the century since the... Read More
$2,795.
Michell Orbe SE Turntable
$5,995.00 Orbe SE with Never-Connected PSU w/o Arm​    Based on the ever popular Gyro SE, the Orbe SE is Michell’s flagship turntable. It improves upon the Gyro in a number of areas. It employs a similar Eur... Read More
$5,995.
Rega P-8 Apheta 2 Turntable
P-8 Apheta 2             $4,195.00 P-8 Exact                   $3,... Read More
$4,195.
Music Hall MMF-2.3 Turntable
gorgeous high gloss piano black lacquer finish special vibration damping adjustable feet top tier 8.6” carbon fiber tonearm with aluminum headshell low noise fully manual belt-drive design sepa... Read More
$499.
Music Hall MMF-5.3 Turntable
​music hall’s unique dual-plinth construction gorgeous high-gloss piano black lacquer finish top tier 9” carbon fiber tonearm counterweight’s center of gravity is level with the stylus tip, ... Read More
$995.
Music Hall MMF-9.3 Turntable
music hall’s unique dual plinth construction one-piece full carbon fiber tonearm counterweight’s center of gravity is level with the stylus tip, is decoupled from the arm, and acts as a resonance damper ... Read More
$2,195.
Music Hall MMF-11.1 Turntable
​music hall’s unique quadruple-plinth design w/sorbothane vibration isolation one-piece Project ‘9cc Evolution’ carbon fiber tonearm the arm uses four hardened Swiss ABEC 7 ball races in an inverted bearin... Read More
$4,495.
Music Hall MMF-7.3 Turntable
music hall’s unique dual plinth construction one-piece full carbon fiber tonearm counterweight’s center of gravity is level with the ... Read More